| /* //device/system/reference-ril/reference-ril.c |
| ** |
| ** Copyright 2006, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| |
| #include <stdio.h> |
| #include <assert.h> |
| #include <string.h> |
| #include <errno.h> |
| #include <unistd.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <fcntl.h> |
| #include <pthread.h> |
| #include <alloca.h> |
| #include "atchannel.h" |
| #include "at_tok.h" |
| #include "misc.h" |
| #include <getopt.h> |
| #include <sys/socket.h> |
| #include <cutils/sockets.h> |
| #include <termios.h> |
| #include <sys/system_properties.h> |
| |
| #include "ril.h" |
| #include "hardware/qemu_pipe.h" |
| |
| #define LOG_TAG "RIL" |
| #include <utils/Log.h> |
| |
| #define MAX_AT_RESPONSE 0x1000 |
| |
| /* pathname returned from RIL_REQUEST_SETUP_DATA_CALL / RIL_REQUEST_SETUP_DEFAULT_PDP */ |
| #define PPP_TTY_PATH "eth0" |
| |
| #ifdef USE_TI_COMMANDS |
| |
| // Enable a workaround |
| // 1) Make incoming call, do not answer |
| // 2) Hangup remote end |
| // Expected: call should disappear from CLCC line |
| // Actual: Call shows as "ACTIVE" before disappearing |
| #define WORKAROUND_ERRONEOUS_ANSWER 1 |
| |
| // Some varients of the TI stack do not support the +CGEV unsolicited |
| // response. However, they seem to send an unsolicited +CME ERROR: 150 |
| #define WORKAROUND_FAKE_CGEV 1 |
| #endif |
| |
| typedef enum { |
| SIM_ABSENT = 0, |
| SIM_NOT_READY = 1, |
| SIM_READY = 2, /* SIM_READY means the radio state is RADIO_STATE_SIM_READY */ |
| SIM_PIN = 3, |
| SIM_PUK = 4, |
| SIM_NETWORK_PERSONALIZATION = 5 |
| } SIM_Status; |
| |
| static void onRequest (int request, void *data, size_t datalen, RIL_Token t); |
| static RIL_RadioState currentState(); |
| static int onSupports (int requestCode); |
| static void onCancel (RIL_Token t); |
| static const char *getVersion(); |
| static int isRadioOn(); |
| static SIM_Status getSIMStatus(); |
| static int getCardStatus(RIL_CardStatus_v6 **pp_card_status); |
| static void freeCardStatus(RIL_CardStatus_v6 *p_card_status); |
| static void onDataCallListChanged(void *param); |
| |
| extern const char * requestToString(int request); |
| |
| /*** Static Variables ***/ |
| static const RIL_RadioFunctions s_callbacks = { |
| RIL_VERSION, |
| onRequest, |
| currentState, |
| onSupports, |
| onCancel, |
| getVersion |
| }; |
| |
| #ifdef RIL_SHLIB |
| static const struct RIL_Env *s_rilenv; |
| |
| #define RIL_onRequestComplete(t, e, response, responselen) s_rilenv->OnRequestComplete(t,e, response, responselen) |
| #define RIL_onUnsolicitedResponse(a,b,c) s_rilenv->OnUnsolicitedResponse(a,b,c) |
| #define RIL_requestTimedCallback(a,b,c) s_rilenv->RequestTimedCallback(a,b,c) |
| #endif |
| |
| static RIL_RadioState sState = RADIO_STATE_UNAVAILABLE; |
| |
| static pthread_mutex_t s_state_mutex = PTHREAD_MUTEX_INITIALIZER; |
| static pthread_cond_t s_state_cond = PTHREAD_COND_INITIALIZER; |
| |
| static int s_port = -1; |
| static const char * s_device_path = NULL; |
| static int s_device_socket = 0; |
| |
| /* trigger change to this with s_state_cond */ |
| static int s_closed = 0; |
| |
| static int sFD; /* file desc of AT channel */ |
| static char sATBuffer[MAX_AT_RESPONSE+1]; |
| static char *sATBufferCur = NULL; |
| |
| static const struct timeval TIMEVAL_SIMPOLL = {1,0}; |
| static const struct timeval TIMEVAL_CALLSTATEPOLL = {0,500000}; |
| static const struct timeval TIMEVAL_0 = {0,0}; |
| |
| #ifdef WORKAROUND_ERRONEOUS_ANSWER |
| // Max number of times we'll try to repoll when we think |
| // we have a AT+CLCC race condition |
| #define REPOLL_CALLS_COUNT_MAX 4 |
| |
| // Line index that was incoming or waiting at last poll, or -1 for none |
| static int s_incomingOrWaitingLine = -1; |
| // Number of times we've asked for a repoll of AT+CLCC |
| static int s_repollCallsCount = 0; |
| // Should we expect a call to be answered in the next CLCC? |
| static int s_expectAnswer = 0; |
| #endif /* WORKAROUND_ERRONEOUS_ANSWER */ |
| |
| static void pollSIMState (void *param); |
| static void setRadioState(RIL_RadioState newState); |
| |
| static int clccStateToRILState(int state, RIL_CallState *p_state) |
| |
| { |
| switch(state) { |
| case 0: *p_state = RIL_CALL_ACTIVE; return 0; |
| case 1: *p_state = RIL_CALL_HOLDING; return 0; |
| case 2: *p_state = RIL_CALL_DIALING; return 0; |
| case 3: *p_state = RIL_CALL_ALERTING; return 0; |
| case 4: *p_state = RIL_CALL_INCOMING; return 0; |
| case 5: *p_state = RIL_CALL_WAITING; return 0; |
| default: return -1; |
| } |
| } |
| |
| /** |
| * Note: directly modified line and has *p_call point directly into |
| * modified line |
| */ |
| static int callFromCLCCLine(char *line, RIL_Call *p_call) |
| { |
| //+CLCC: 1,0,2,0,0,\"+18005551212\",145 |
| // index,isMT,state,mode,isMpty(,number,TOA)? |
| |
| int err; |
| int state; |
| int mode; |
| |
| err = at_tok_start(&line); |
| if (err < 0) goto error; |
| |
| err = at_tok_nextint(&line, &(p_call->index)); |
| if (err < 0) goto error; |
| |
| err = at_tok_nextbool(&line, &(p_call->isMT)); |
| if (err < 0) goto error; |
| |
| err = at_tok_nextint(&line, &state); |
| if (err < 0) goto error; |
| |
| err = clccStateToRILState(state, &(p_call->state)); |
| if (err < 0) goto error; |
| |
| err = at_tok_nextint(&line, &mode); |
| if (err < 0) goto error; |
| |
| p_call->isVoice = (mode == 0); |
| |
| err = at_tok_nextbool(&line, &(p_call->isMpty)); |
| if (err < 0) goto error; |
| |
| if (at_tok_hasmore(&line)) { |
| err = at_tok_nextstr(&line, &(p_call->number)); |
| |
| /* tolerate null here */ |
| if (err < 0) return 0; |
| |
| // Some lame implementations return strings |
| // like "NOT AVAILABLE" in the CLCC line |
| if (p_call->number != NULL |
| && 0 == strspn(p_call->number, "+0123456789") |
| ) { |
| p_call->number = NULL; |
| } |
| |
| err = at_tok_nextint(&line, &p_call->toa); |
| if (err < 0) goto error; |
| } |
| |
| p_call->uusInfo = NULL; |
| |
| return 0; |
| |
| error: |
| ALOGE("invalid CLCC line\n"); |
| return -1; |
| } |
| |
| |
| /** do post-AT+CFUN=1 initialization */ |
| static void onRadioPowerOn() |
| { |
| #ifdef USE_TI_COMMANDS |
| /* Must be after CFUN=1 */ |
| /* TI specific -- notifications for CPHS things such */ |
| /* as CPHS message waiting indicator */ |
| |
| at_send_command("AT%CPHS=1", NULL); |
| |
| /* TI specific -- enable NITZ unsol notifs */ |
| at_send_command("AT%CTZV=1", NULL); |
| #endif |
| |
| pollSIMState(NULL); |
| } |
| |
| /** do post- SIM ready initialization */ |
| static void onSIMReady() |
| { |
| at_send_command_singleline("AT+CSMS=1", "+CSMS:", NULL); |
| /* |
| * Always send SMS messages directly to the TE |
| * |
| * mode = 1 // discard when link is reserved (link should never be |
| * reserved) |
| * mt = 2 // most messages routed to TE |
| * bm = 2 // new cell BM's routed to TE |
| * ds = 1 // Status reports routed to TE |
| * bfr = 1 // flush buffer |
| */ |
| at_send_command("AT+CNMI=1,2,2,1,1", NULL); |
| } |
| |
| static void requestRadioPower(void *data, size_t datalen, RIL_Token t) |
| { |
| int onOff; |
| |
| int err; |
| ATResponse *p_response = NULL; |
| |
| assert (datalen >= sizeof(int *)); |
| onOff = ((int *)data)[0]; |
| |
| if (onOff == 0 && sState != RADIO_STATE_OFF) { |
| err = at_send_command("AT+CFUN=0", &p_response); |
| if (err < 0 || p_response->success == 0) goto error; |
| setRadioState(RADIO_STATE_OFF); |
| } else if (onOff > 0 && sState == RADIO_STATE_OFF) { |
| err = at_send_command("AT+CFUN=1", &p_response); |
| if (err < 0|| p_response->success == 0) { |
| // Some stacks return an error when there is no SIM, |
| // but they really turn the RF portion on |
| // So, if we get an error, let's check to see if it |
| // turned on anyway |
| |
| if (isRadioOn() != 1) { |
| goto error; |
| } |
| } |
| setRadioState(RADIO_STATE_SIM_NOT_READY); |
| } |
| |
| at_response_free(p_response); |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, NULL, 0); |
| return; |
| error: |
| at_response_free(p_response); |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| } |
| |
| static void requestOrSendDataCallList(RIL_Token *t); |
| |
| static void onDataCallListChanged(void *param) |
| { |
| requestOrSendDataCallList(NULL); |
| } |
| |
| static void requestDataCallList(void *data, size_t datalen, RIL_Token t) |
| { |
| requestOrSendDataCallList(&t); |
| } |
| |
| static void requestOrSendDataCallList(RIL_Token *t) |
| { |
| ATResponse *p_response; |
| ATLine *p_cur; |
| int err; |
| int n = 0; |
| char *out; |
| |
| err = at_send_command_multiline ("AT+CGACT?", "+CGACT:", &p_response); |
| if (err != 0 || p_response->success == 0) { |
| if (t != NULL) |
| RIL_onRequestComplete(*t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| else |
| RIL_onUnsolicitedResponse(RIL_UNSOL_DATA_CALL_LIST_CHANGED, |
| NULL, 0); |
| return; |
| } |
| |
| for (p_cur = p_response->p_intermediates; p_cur != NULL; |
| p_cur = p_cur->p_next) |
| n++; |
| |
| RIL_Data_Call_Response_v6 *responses = |
| alloca(n * sizeof(RIL_Data_Call_Response_v6)); |
| |
| int i; |
| for (i = 0; i < n; i++) { |
| responses[i].status = -1; |
| responses[i].suggestedRetryTime = -1; |
| responses[i].cid = -1; |
| responses[i].active = -1; |
| responses[i].type = ""; |
| responses[i].ifname = ""; |
| responses[i].addresses = ""; |
| responses[i].dnses = ""; |
| responses[i].gateways = ""; |
| } |
| |
| RIL_Data_Call_Response_v6 *response = responses; |
| for (p_cur = p_response->p_intermediates; p_cur != NULL; |
| p_cur = p_cur->p_next) { |
| char *line = p_cur->line; |
| |
| err = at_tok_start(&line); |
| if (err < 0) |
| goto error; |
| |
| err = at_tok_nextint(&line, &response->cid); |
| if (err < 0) |
| goto error; |
| |
| err = at_tok_nextint(&line, &response->active); |
| if (err < 0) |
| goto error; |
| |
| response++; |
| } |
| |
| at_response_free(p_response); |
| |
| err = at_send_command_multiline ("AT+CGDCONT?", "+CGDCONT:", &p_response); |
| if (err != 0 || p_response->success == 0) { |
| if (t != NULL) |
| RIL_onRequestComplete(*t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| else |
| RIL_onUnsolicitedResponse(RIL_UNSOL_DATA_CALL_LIST_CHANGED, |
| NULL, 0); |
| return; |
| } |
| |
| for (p_cur = p_response->p_intermediates; p_cur != NULL; |
| p_cur = p_cur->p_next) { |
| char *line = p_cur->line; |
| int cid; |
| |
| err = at_tok_start(&line); |
| if (err < 0) |
| goto error; |
| |
| err = at_tok_nextint(&line, &cid); |
| if (err < 0) |
| goto error; |
| |
| for (i = 0; i < n; i++) { |
| if (responses[i].cid == cid) |
| break; |
| } |
| |
| if (i >= n) { |
| /* details for a context we didn't hear about in the last request */ |
| continue; |
| } |
| |
| // Assume no error |
| responses[i].status = 0; |
| |
| // type |
| err = at_tok_nextstr(&line, &out); |
| if (err < 0) |
| goto error; |
| responses[i].type = alloca(strlen(out) + 1); |
| strcpy(responses[i].type, out); |
| |
| // APN ignored for v5 |
| err = at_tok_nextstr(&line, &out); |
| if (err < 0) |
| goto error; |
| |
| responses[i].ifname = alloca(strlen(PPP_TTY_PATH) + 1); |
| strcpy(responses[i].ifname, PPP_TTY_PATH); |
| |
| err = at_tok_nextstr(&line, &out); |
| if (err < 0) |
| goto error; |
| |
| responses[i].addresses = alloca(strlen(out) + 1); |
| strcpy(responses[i].addresses, out); |
| |
| { |
| char propValue[PROP_VALUE_MAX]; |
| |
| if (__system_property_get("ro.kernel.qemu", propValue) != 0) { |
| /* We are in the emulator - the dns servers are listed |
| * by the following system properties, setup in |
| * /system/etc/init.goldfish.sh: |
| * - net.eth0.dns1 |
| * - net.eth0.dns2 |
| * - net.eth0.dns3 |
| * - net.eth0.dns4 |
| */ |
| const int dnslist_sz = 128; |
| char* dnslist = alloca(dnslist_sz); |
| const char* separator = ""; |
| int nn; |
| |
| dnslist[0] = 0; |
| for (nn = 1; nn <= 4; nn++) { |
| /* Probe net.eth0.dns<n> */ |
| char propName[PROP_NAME_MAX]; |
| snprintf(propName, sizeof propName, "net.eth0.dns%d", nn); |
| |
| /* Ignore if undefined */ |
| if (__system_property_get(propName, propValue) == 0) { |
| continue; |
| } |
| |
| /* Append the DNS IP address */ |
| strlcat(dnslist, separator, dnslist_sz); |
| strlcat(dnslist, propValue, dnslist_sz); |
| separator = " "; |
| } |
| responses[i].dnses = dnslist; |
| |
| /* There is only on gateway in the emulator */ |
| responses[i].gateways = "10.0.2.2"; |
| } |
| else { |
| /* I don't know where we are, so use the public Google DNS |
| * servers by default and no gateway. |
| */ |
| responses[i].dnses = "8.8.8.8 8.8.4.4"; |
| responses[i].gateways = ""; |
| } |
| } |
| } |
| |
| at_response_free(p_response); |
| |
| if (t != NULL) |
| RIL_onRequestComplete(*t, RIL_E_SUCCESS, responses, |
| n * sizeof(RIL_Data_Call_Response_v6)); |
| else |
| RIL_onUnsolicitedResponse(RIL_UNSOL_DATA_CALL_LIST_CHANGED, |
| responses, |
| n * sizeof(RIL_Data_Call_Response_v6)); |
| |
| return; |
| |
| error: |
| if (t != NULL) |
| RIL_onRequestComplete(*t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| else |
| RIL_onUnsolicitedResponse(RIL_UNSOL_DATA_CALL_LIST_CHANGED, |
| NULL, 0); |
| |
| at_response_free(p_response); |
| } |
| |
| static void requestQueryNetworkSelectionMode( |
| void *data, size_t datalen, RIL_Token t) |
| { |
| int err; |
| ATResponse *p_response = NULL; |
| int response = 0; |
| char *line; |
| |
| err = at_send_command_singleline("AT+COPS?", "+COPS:", &p_response); |
| |
| if (err < 0 || p_response->success == 0) { |
| goto error; |
| } |
| |
| line = p_response->p_intermediates->line; |
| |
| err = at_tok_start(&line); |
| |
| if (err < 0) { |
| goto error; |
| } |
| |
| err = at_tok_nextint(&line, &response); |
| |
| if (err < 0) { |
| goto error; |
| } |
| |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, &response, sizeof(int)); |
| at_response_free(p_response); |
| return; |
| error: |
| at_response_free(p_response); |
| ALOGE("requestQueryNetworkSelectionMode must never return error when radio is on"); |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| } |
| |
| static void sendCallStateChanged(void *param) |
| { |
| RIL_onUnsolicitedResponse ( |
| RIL_UNSOL_RESPONSE_CALL_STATE_CHANGED, |
| NULL, 0); |
| } |
| |
| static void requestGetCurrentCalls(void *data, size_t datalen, RIL_Token t) |
| { |
| int err; |
| ATResponse *p_response; |
| ATLine *p_cur; |
| int countCalls; |
| int countValidCalls; |
| RIL_Call *p_calls; |
| RIL_Call **pp_calls; |
| int i; |
| int needRepoll = 0; |
| |
| #ifdef WORKAROUND_ERRONEOUS_ANSWER |
| int prevIncomingOrWaitingLine; |
| |
| prevIncomingOrWaitingLine = s_incomingOrWaitingLine; |
| s_incomingOrWaitingLine = -1; |
| #endif /*WORKAROUND_ERRONEOUS_ANSWER*/ |
| |
| err = at_send_command_multiline ("AT+CLCC", "+CLCC:", &p_response); |
| |
| if (err != 0 || p_response->success == 0) { |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| return; |
| } |
| |
| /* count the calls */ |
| for (countCalls = 0, p_cur = p_response->p_intermediates |
| ; p_cur != NULL |
| ; p_cur = p_cur->p_next |
| ) { |
| countCalls++; |
| } |
| |
| /* yes, there's an array of pointers and then an array of structures */ |
| |
| pp_calls = (RIL_Call **)alloca(countCalls * sizeof(RIL_Call *)); |
| p_calls = (RIL_Call *)alloca(countCalls * sizeof(RIL_Call)); |
| memset (p_calls, 0, countCalls * sizeof(RIL_Call)); |
| |
| /* init the pointer array */ |
| for(i = 0; i < countCalls ; i++) { |
| pp_calls[i] = &(p_calls[i]); |
| } |
| |
| for (countValidCalls = 0, p_cur = p_response->p_intermediates |
| ; p_cur != NULL |
| ; p_cur = p_cur->p_next |
| ) { |
| err = callFromCLCCLine(p_cur->line, p_calls + countValidCalls); |
| |
| if (err != 0) { |
| continue; |
| } |
| |
| #ifdef WORKAROUND_ERRONEOUS_ANSWER |
| if (p_calls[countValidCalls].state == RIL_CALL_INCOMING |
| || p_calls[countValidCalls].state == RIL_CALL_WAITING |
| ) { |
| s_incomingOrWaitingLine = p_calls[countValidCalls].index; |
| } |
| #endif /*WORKAROUND_ERRONEOUS_ANSWER*/ |
| |
| if (p_calls[countValidCalls].state != RIL_CALL_ACTIVE |
| && p_calls[countValidCalls].state != RIL_CALL_HOLDING |
| ) { |
| needRepoll = 1; |
| } |
| |
| countValidCalls++; |
| } |
| |
| #ifdef WORKAROUND_ERRONEOUS_ANSWER |
| // Basically: |
| // A call was incoming or waiting |
| // Now it's marked as active |
| // But we never answered it |
| // |
| // This is probably a bug, and the call will probably |
| // disappear from the call list in the next poll |
| if (prevIncomingOrWaitingLine >= 0 |
| && s_incomingOrWaitingLine < 0 |
| && s_expectAnswer == 0 |
| ) { |
| for (i = 0; i < countValidCalls ; i++) { |
| |
| if (p_calls[i].index == prevIncomingOrWaitingLine |
| && p_calls[i].state == RIL_CALL_ACTIVE |
| && s_repollCallsCount < REPOLL_CALLS_COUNT_MAX |
| ) { |
| ALOGI( |
| "Hit WORKAROUND_ERRONOUS_ANSWER case." |
| " Repoll count: %d\n", s_repollCallsCount); |
| s_repollCallsCount++; |
| goto error; |
| } |
| } |
| } |
| |
| s_expectAnswer = 0; |
| s_repollCallsCount = 0; |
| #endif /*WORKAROUND_ERRONEOUS_ANSWER*/ |
| |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, pp_calls, |
| countValidCalls * sizeof (RIL_Call *)); |
| |
| at_response_free(p_response); |
| |
| #ifdef POLL_CALL_STATE |
| if (countValidCalls) { // We don't seem to get a "NO CARRIER" message from |
| // smd, so we're forced to poll until the call ends. |
| #else |
| if (needRepoll) { |
| #endif |
| RIL_requestTimedCallback (sendCallStateChanged, NULL, &TIMEVAL_CALLSTATEPOLL); |
| } |
| |
| return; |
| error: |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| at_response_free(p_response); |
| } |
| |
| static void requestDial(void *data, size_t datalen, RIL_Token t) |
| { |
| RIL_Dial *p_dial; |
| char *cmd; |
| const char *clir; |
| int ret; |
| |
| p_dial = (RIL_Dial *)data; |
| |
| switch (p_dial->clir) { |
| case 1: clir = "I"; break; /*invocation*/ |
| case 2: clir = "i"; break; /*suppression*/ |
| default: |
| case 0: clir = ""; break; /*subscription default*/ |
| } |
| |
| asprintf(&cmd, "ATD%s%s;", p_dial->address, clir); |
| |
| ret = at_send_command(cmd, NULL); |
| |
| free(cmd); |
| |
| /* success or failure is ignored by the upper layer here. |
| it will call GET_CURRENT_CALLS and determine success that way */ |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, NULL, 0); |
| } |
| |
| static void requestWriteSmsToSim(void *data, size_t datalen, RIL_Token t) |
| { |
| RIL_SMS_WriteArgs *p_args; |
| char *cmd; |
| int length; |
| int err; |
| ATResponse *p_response = NULL; |
| |
| p_args = (RIL_SMS_WriteArgs *)data; |
| |
| length = strlen(p_args->pdu)/2; |
| asprintf(&cmd, "AT+CMGW=%d,%d", length, p_args->status); |
| |
| err = at_send_command_sms(cmd, p_args->pdu, "+CMGW:", &p_response); |
| |
| if (err != 0 || p_response->success == 0) goto error; |
| |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, NULL, 0); |
| at_response_free(p_response); |
| |
| return; |
| error: |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| at_response_free(p_response); |
| } |
| |
| static void requestHangup(void *data, size_t datalen, RIL_Token t) |
| { |
| int *p_line; |
| |
| int ret; |
| char *cmd; |
| |
| p_line = (int *)data; |
| |
| // 3GPP 22.030 6.5.5 |
| // "Releases a specific active call X" |
| asprintf(&cmd, "AT+CHLD=1%d", p_line[0]); |
| |
| ret = at_send_command(cmd, NULL); |
| |
| free(cmd); |
| |
| /* success or failure is ignored by the upper layer here. |
| it will call GET_CURRENT_CALLS and determine success that way */ |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, NULL, 0); |
| } |
| |
| static void requestSignalStrength(void *data, size_t datalen, RIL_Token t) |
| { |
| ATResponse *p_response = NULL; |
| int err; |
| char *line; |
| int count =0; |
| int numofElements=sizeof(RIL_SignalStrength_v6)/sizeof(int); |
| int response[numofElements]; |
| |
| err = at_send_command_singleline("AT+CSQ", "+CSQ:", &p_response); |
| |
| if (err < 0 || p_response->success == 0) { |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| goto error; |
| } |
| |
| line = p_response->p_intermediates->line; |
| |
| err = at_tok_start(&line); |
| if (err < 0) goto error; |
| |
| for (count =0; count < numofElements; count ++) { |
| err = at_tok_nextint(&line, &(response[count])); |
| if (err < 0) goto error; |
| } |
| |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, response, sizeof(response)); |
| |
| at_response_free(p_response); |
| return; |
| |
| error: |
| ALOGE("requestSignalStrength must never return an error when radio is on"); |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| at_response_free(p_response); |
| } |
| |
| static void requestRegistrationState(int request, void *data, |
| size_t datalen, RIL_Token t) |
| { |
| int err; |
| int response[4]; |
| char * responseStr[4]; |
| ATResponse *p_response = NULL; |
| const char *cmd; |
| const char *prefix; |
| char *line, *p; |
| int commas; |
| int skip; |
| int count = 3; |
| |
| |
| if (request == RIL_REQUEST_VOICE_REGISTRATION_STATE) { |
| cmd = "AT+CREG?"; |
| prefix = "+CREG:"; |
| } else if (request == RIL_REQUEST_DATA_REGISTRATION_STATE) { |
| cmd = "AT+CGREG?"; |
| prefix = "+CGREG:"; |
| } else { |
| assert(0); |
| goto error; |
| } |
| |
| err = at_send_command_singleline(cmd, prefix, &p_response); |
| |
| if (err != 0) goto error; |
| |
| line = p_response->p_intermediates->line; |
| |
| err = at_tok_start(&line); |
| if (err < 0) goto error; |
| |
| /* Ok you have to be careful here |
| * The solicited version of the CREG response is |
| * +CREG: n, stat, [lac, cid] |
| * and the unsolicited version is |
| * +CREG: stat, [lac, cid] |
| * The <n> parameter is basically "is unsolicited creg on?" |
| * which it should always be |
| * |
| * Now we should normally get the solicited version here, |
| * but the unsolicited version could have snuck in |
| * so we have to handle both |
| * |
| * Also since the LAC and CID are only reported when registered, |
| * we can have 1, 2, 3, or 4 arguments here |
| * |
| * finally, a +CGREG: answer may have a fifth value that corresponds |
| * to the network type, as in; |
| * |
| * +CGREG: n, stat [,lac, cid [,networkType]] |
| */ |
| |
| /* count number of commas */ |
| commas = 0; |
| for (p = line ; *p != '\0' ;p++) { |
| if (*p == ',') commas++; |
| } |
| |
| switch (commas) { |
| case 0: /* +CREG: <stat> */ |
| err = at_tok_nextint(&line, &response[0]); |
| if (err < 0) goto error; |
| response[1] = -1; |
| response[2] = -1; |
| break; |
| |
| case 1: /* +CREG: <n>, <stat> */ |
| err = at_tok_nextint(&line, &skip); |
| if (err < 0) goto error; |
| err = at_tok_nextint(&line, &response[0]); |
| if (err < 0) goto error; |
| response[1] = -1; |
| response[2] = -1; |
| if (err < 0) goto error; |
| break; |
| |
| case 2: /* +CREG: <stat>, <lac>, <cid> */ |
| err = at_tok_nextint(&line, &response[0]); |
| if (err < 0) goto error; |
| err = at_tok_nexthexint(&line, &response[1]); |
| if (err < 0) goto error; |
| err = at_tok_nexthexint(&line, &response[2]); |
| if (err < 0) goto error; |
| break; |
| case 3: /* +CREG: <n>, <stat>, <lac>, <cid> */ |
| err = at_tok_nextint(&line, &skip); |
| if (err < 0) goto error; |
| err = at_tok_nextint(&line, &response[0]); |
| if (err < 0) goto error; |
| err = at_tok_nexthexint(&line, &response[1]); |
| if (err < 0) goto error; |
| err = at_tok_nexthexint(&line, &response[2]); |
| if (err < 0) goto error; |
| break; |
| /* special case for CGREG, there is a fourth parameter |
| * that is the network type (unknown/gprs/edge/umts) |
| */ |
| case 4: /* +CGREG: <n>, <stat>, <lac>, <cid>, <networkType> */ |
| err = at_tok_nextint(&line, &skip); |
| if (err < 0) goto error; |
| err = at_tok_nextint(&line, &response[0]); |
| if (err < 0) goto error; |
| err = at_tok_nexthexint(&line, &response[1]); |
| if (err < 0) goto error; |
| err = at_tok_nexthexint(&line, &response[2]); |
| if (err < 0) goto error; |
| err = at_tok_nexthexint(&line, &response[3]); |
| if (err < 0) goto error; |
| count = 4; |
| break; |
| default: |
| goto error; |
| } |
| |
| asprintf(&responseStr[0], "%d", response[0]); |
| asprintf(&responseStr[1], "%x", response[1]); |
| asprintf(&responseStr[2], "%x", response[2]); |
| |
| if (count > 3) |
| asprintf(&responseStr[3], "%d", response[3]); |
| |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, responseStr, count*sizeof(char*)); |
| at_response_free(p_response); |
| |
| return; |
| error: |
| ALOGE("requestRegistrationState must never return an error when radio is on"); |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| at_response_free(p_response); |
| } |
| |
| static void requestOperator(void *data, size_t datalen, RIL_Token t) |
| { |
| int err; |
| int i; |
| int skip; |
| ATLine *p_cur; |
| char *response[3]; |
| |
| memset(response, 0, sizeof(response)); |
| |
| ATResponse *p_response = NULL; |
| |
| err = at_send_command_multiline( |
| "AT+COPS=3,0;+COPS?;+COPS=3,1;+COPS?;+COPS=3,2;+COPS?", |
| "+COPS:", &p_response); |
| |
| /* we expect 3 lines here: |
| * +COPS: 0,0,"T - Mobile" |
| * +COPS: 0,1,"TMO" |
| * +COPS: 0,2,"310170" |
| */ |
| |
| if (err != 0) goto error; |
| |
| for (i = 0, p_cur = p_response->p_intermediates |
| ; p_cur != NULL |
| ; p_cur = p_cur->p_next, i++ |
| ) { |
| char *line = p_cur->line; |
| |
| err = at_tok_start(&line); |
| if (err < 0) goto error; |
| |
| err = at_tok_nextint(&line, &skip); |
| if (err < 0) goto error; |
| |
| // If we're unregistered, we may just get |
| // a "+COPS: 0" response |
| if (!at_tok_hasmore(&line)) { |
| response[i] = NULL; |
| continue; |
| } |
| |
| err = at_tok_nextint(&line, &skip); |
| if (err < 0) goto error; |
| |
| // a "+COPS: 0, n" response is also possible |
| if (!at_tok_hasmore(&line)) { |
| response[i] = NULL; |
| continue; |
| } |
| |
| err = at_tok_nextstr(&line, &(response[i])); |
| if (err < 0) goto error; |
| } |
| |
| if (i != 3) { |
| /* expect 3 lines exactly */ |
| goto error; |
| } |
| |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, response, sizeof(response)); |
| at_response_free(p_response); |
| |
| return; |
| error: |
| ALOGE("requestOperator must not return error when radio is on"); |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| at_response_free(p_response); |
| } |
| |
| static void requestSendSMS(void *data, size_t datalen, RIL_Token t) |
| { |
| int err; |
| const char *smsc; |
| const char *pdu; |
| int tpLayerLength; |
| char *cmd1, *cmd2; |
| RIL_SMS_Response response; |
| ATResponse *p_response = NULL; |
| |
| smsc = ((const char **)data)[0]; |
| pdu = ((const char **)data)[1]; |
| |
| tpLayerLength = strlen(pdu)/2; |
| |
| // "NULL for default SMSC" |
| if (smsc == NULL) { |
| smsc= "00"; |
| } |
| |
| asprintf(&cmd1, "AT+CMGS=%d", tpLayerLength); |
| asprintf(&cmd2, "%s%s", smsc, pdu); |
| |
| err = at_send_command_sms(cmd1, cmd2, "+CMGS:", &p_response); |
| |
| if (err != 0 || p_response->success == 0) goto error; |
| |
| memset(&response, 0, sizeof(response)); |
| |
| /* FIXME fill in messageRef and ackPDU */ |
| |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, &response, sizeof(response)); |
| at_response_free(p_response); |
| |
| return; |
| error: |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| at_response_free(p_response); |
| } |
| |
| static void requestSetupDataCall(void *data, size_t datalen, RIL_Token t) |
| { |
| const char *apn; |
| char *cmd; |
| int err; |
| ATResponse *p_response = NULL; |
| |
| apn = ((const char **)data)[2]; |
| |
| #ifdef USE_TI_COMMANDS |
| // Config for multislot class 10 (probably default anyway eh?) |
| err = at_send_command("AT%CPRIM=\"GMM\",\"CONFIG MULTISLOT_CLASS=<10>\"", |
| NULL); |
| |
| err = at_send_command("AT%DATA=2,\"UART\",1,,\"SER\",\"UART\",0", NULL); |
| #endif /* USE_TI_COMMANDS */ |
| |
| int fd, qmistatus; |
| size_t cur = 0; |
| size_t len; |
| ssize_t written, rlen; |
| char status[32] = {0}; |
| int retry = 10; |
| const char *pdp_type; |
| |
| ALOGD("requesting data connection to APN '%s'", apn); |
| |
| fd = open ("/dev/qmi", O_RDWR); |
| if (fd >= 0) { /* the device doesn't exist on the emulator */ |
| |
| ALOGD("opened the qmi device\n"); |
| asprintf(&cmd, "up:%s", apn); |
| len = strlen(cmd); |
| |
| while (cur < len) { |
| do { |
| written = write (fd, cmd + cur, len - cur); |
| } while (written < 0 && errno == EINTR); |
| |
| if (written < 0) { |
| ALOGE("### ERROR writing to /dev/qmi"); |
| close(fd); |
| goto error; |
| } |
| |
| cur += written; |
| } |
| |
| // wait for interface to come online |
| |
| do { |
| sleep(1); |
| do { |
| rlen = read(fd, status, 31); |
| } while (rlen < 0 && errno == EINTR); |
| |
| if (rlen < 0) { |
| ALOGE("### ERROR reading from /dev/qmi"); |
| close(fd); |
| goto error; |
| } else { |
| status[rlen] = '\0'; |
| ALOGD("### status: %s", status); |
| } |
| } while (strncmp(status, "STATE=up", 8) && strcmp(status, "online") && --retry); |
| |
| close(fd); |
| |
| if (retry == 0) { |
| ALOGE("### Failed to get data connection up\n"); |
| goto error; |
| } |
| |
| qmistatus = system("netcfg rmnet0 dhcp"); |
| |
| ALOGD("netcfg rmnet0 dhcp: status %d\n", qmistatus); |
| |
| if (qmistatus < 0) goto error; |
| |
| } else { |
| |
| if (datalen > 6 * sizeof(char *)) { |
| pdp_type = ((const char **)data)[6]; |
| } else { |
| pdp_type = "IP"; |
| } |
| |
| asprintf(&cmd, "AT+CGDCONT=1,\"%s\",\"%s\",,0,0", pdp_type, apn); |
| //FIXME check for error here |
| err = at_send_command(cmd, NULL); |
| free(cmd); |
| |
| // Set required QoS params to default |
| err = at_send_command("AT+CGQREQ=1", NULL); |
| |
| // Set minimum QoS params to default |
| err = at_send_command("AT+CGQMIN=1", NULL); |
| |
| // packet-domain event reporting |
| err = at_send_command("AT+CGEREP=1,0", NULL); |
| |
| // Hangup anything that's happening there now |
| err = at_send_command("AT+CGACT=1,0", NULL); |
| |
| // Start data on PDP context 1 |
| err = at_send_command("ATD*99***1#", &p_response); |
| |
| if (err < 0 || p_response->success == 0) { |
| goto error; |
| } |
| } |
| |
| requestOrSendDataCallList(&t); |
| |
| at_response_free(p_response); |
| |
| return; |
| error: |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| at_response_free(p_response); |
| |
| } |
| |
| static void requestSMSAcknowledge(void *data, size_t datalen, RIL_Token t) |
| { |
| int ackSuccess; |
| int err; |
| |
| ackSuccess = ((int *)data)[0]; |
| |
| if (ackSuccess == 1) { |
| err = at_send_command("AT+CNMA=1", NULL); |
| } else if (ackSuccess == 0) { |
| err = at_send_command("AT+CNMA=2", NULL); |
| } else { |
| ALOGE("unsupported arg to RIL_REQUEST_SMS_ACKNOWLEDGE\n"); |
| goto error; |
| } |
| |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, NULL, 0); |
| error: |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| |
| } |
| |
| static void requestSIM_IO(void *data, size_t datalen, RIL_Token t) |
| { |
| ATResponse *p_response = NULL; |
| RIL_SIM_IO_Response sr; |
| int err; |
| char *cmd = NULL; |
| RIL_SIM_IO_v6 *p_args; |
| char *line; |
| |
| memset(&sr, 0, sizeof(sr)); |
| |
| p_args = (RIL_SIM_IO_v6 *)data; |
| |
| /* FIXME handle pin2 */ |
| |
| if (p_args->data == NULL) { |
| asprintf(&cmd, "AT+CRSM=%d,%d,%d,%d,%d", |
| p_args->command, p_args->fileid, |
| p_args->p1, p_args->p2, p_args->p3); |
| } else { |
| asprintf(&cmd, "AT+CRSM=%d,%d,%d,%d,%d,%s", |
| p_args->command, p_args->fileid, |
| p_args->p1, p_args->p2, p_args->p3, p_args->data); |
| } |
| |
| err = at_send_command_singleline(cmd, "+CRSM:", &p_response); |
| |
| if (err < 0 || p_response->success == 0) { |
| goto error; |
| } |
| |
| line = p_response->p_intermediates->line; |
| |
| err = at_tok_start(&line); |
| if (err < 0) goto error; |
| |
| err = at_tok_nextint(&line, &(sr.sw1)); |
| if (err < 0) goto error; |
| |
| err = at_tok_nextint(&line, &(sr.sw2)); |
| if (err < 0) goto error; |
| |
| if (at_tok_hasmore(&line)) { |
| err = at_tok_nextstr(&line, &(sr.simResponse)); |
| if (err < 0) goto error; |
| } |
| |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, &sr, sizeof(sr)); |
| at_response_free(p_response); |
| free(cmd); |
| |
| return; |
| error: |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| at_response_free(p_response); |
| free(cmd); |
| |
| } |
| |
| static void requestEnterSimPin(void* data, size_t datalen, RIL_Token t) |
| { |
| ATResponse *p_response = NULL; |
| int err; |
| char* cmd = NULL; |
| const char** strings = (const char**)data;; |
| |
| if ( datalen == sizeof(char*) ) { |
| asprintf(&cmd, "AT+CPIN=%s", strings[0]); |
| } else if ( datalen == 2*sizeof(char*) ) { |
| asprintf(&cmd, "AT+CPIN=%s,%s", strings[0], strings[1]); |
| } else |
| goto error; |
| |
| err = at_send_command_singleline(cmd, "+CPIN:", &p_response); |
| free(cmd); |
| |
| if (err < 0 || p_response->success == 0) { |
| error: |
| RIL_onRequestComplete(t, RIL_E_PASSWORD_INCORRECT, NULL, 0); |
| } else { |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, NULL, 0); |
| } |
| at_response_free(p_response); |
| } |
| |
| |
| static void requestSendUSSD(void *data, size_t datalen, RIL_Token t) |
| { |
| const char *ussdRequest; |
| |
| ussdRequest = (char *)(data); |
| |
| |
| RIL_onRequestComplete(t, RIL_E_REQUEST_NOT_SUPPORTED, NULL, 0); |
| |
| // @@@ TODO |
| |
| } |
| |
| |
| /*** Callback methods from the RIL library to us ***/ |
| |
| /** |
| * Call from RIL to us to make a RIL_REQUEST |
| * |
| * Must be completed with a call to RIL_onRequestComplete() |
| * |
| * RIL_onRequestComplete() may be called from any thread, before or after |
| * this function returns. |
| * |
| * Will always be called from the same thread, so returning here implies |
| * that the radio is ready to process another command (whether or not |
| * the previous command has completed). |
| */ |
| static void |
| onRequest (int request, void *data, size_t datalen, RIL_Token t) |
| { |
| ATResponse *p_response; |
| int err; |
| |
| ALOGD("onRequest: %s", requestToString(request)); |
| |
| /* Ignore all requests except RIL_REQUEST_GET_SIM_STATUS |
| * when RADIO_STATE_UNAVAILABLE. |
| */ |
| if (sState == RADIO_STATE_UNAVAILABLE |
| && request != RIL_REQUEST_GET_SIM_STATUS |
| ) { |
| RIL_onRequestComplete(t, RIL_E_RADIO_NOT_AVAILABLE, NULL, 0); |
| return; |
| } |
| |
| /* Ignore all non-power requests when RADIO_STATE_OFF |
| * (except RIL_REQUEST_GET_SIM_STATUS) |
| */ |
| if (sState == RADIO_STATE_OFF |
| && !(request == RIL_REQUEST_RADIO_POWER |
| || request == RIL_REQUEST_GET_SIM_STATUS) |
| ) { |
| RIL_onRequestComplete(t, RIL_E_RADIO_NOT_AVAILABLE, NULL, 0); |
| return; |
| } |
| |
| switch (request) { |
| case RIL_REQUEST_GET_SIM_STATUS: { |
| RIL_CardStatus_v6 *p_card_status; |
| char *p_buffer; |
| int buffer_size; |
| |
| int result = getCardStatus(&p_card_status); |
| if (result == RIL_E_SUCCESS) { |
| p_buffer = (char *)p_card_status; |
| buffer_size = sizeof(*p_card_status); |
| } else { |
| p_buffer = NULL; |
| buffer_size = 0; |
| } |
| RIL_onRequestComplete(t, result, p_buffer, buffer_size); |
| freeCardStatus(p_card_status); |
| break; |
| } |
| case RIL_REQUEST_GET_CURRENT_CALLS: |
| requestGetCurrentCalls(data, datalen, t); |
| break; |
| case RIL_REQUEST_DIAL: |
| requestDial(data, datalen, t); |
| break; |
| case RIL_REQUEST_HANGUP: |
| requestHangup(data, datalen, t); |
| break; |
| case RIL_REQUEST_HANGUP_WAITING_OR_BACKGROUND: |
| // 3GPP 22.030 6.5.5 |
| // "Releases all held calls or sets User Determined User Busy |
| // (UDUB) for a waiting call." |
| at_send_command("AT+CHLD=0", NULL); |
| |
| /* success or failure is ignored by the upper layer here. |
| it will call GET_CURRENT_CALLS and determine success that way */ |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, NULL, 0); |
| break; |
| case RIL_REQUEST_HANGUP_FOREGROUND_RESUME_BACKGROUND: |
| // 3GPP 22.030 6.5.5 |
| // "Releases all active calls (if any exist) and accepts |
| // the other (held or waiting) call." |
| at_send_command("AT+CHLD=1", NULL); |
| |
| /* success or failure is ignored by the upper layer here. |
| it will call GET_CURRENT_CALLS and determine success that way */ |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, NULL, 0); |
| break; |
| case RIL_REQUEST_SWITCH_WAITING_OR_HOLDING_AND_ACTIVE: |
| // 3GPP 22.030 6.5.5 |
| // "Places all active calls (if any exist) on hold and accepts |
| // the other (held or waiting) call." |
| at_send_command("AT+CHLD=2", NULL); |
| |
| #ifdef WORKAROUND_ERRONEOUS_ANSWER |
| s_expectAnswer = 1; |
| #endif /* WORKAROUND_ERRONEOUS_ANSWER */ |
| |
| /* success or failure is ignored by the upper layer here. |
| it will call GET_CURRENT_CALLS and determine success that way */ |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, NULL, 0); |
| break; |
| case RIL_REQUEST_ANSWER: |
| at_send_command("ATA", NULL); |
| |
| #ifdef WORKAROUND_ERRONEOUS_ANSWER |
| s_expectAnswer = 1; |
| #endif /* WORKAROUND_ERRONEOUS_ANSWER */ |
| |
| /* success or failure is ignored by the upper layer here. |
| it will call GET_CURRENT_CALLS and determine success that way */ |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, NULL, 0); |
| break; |
| case RIL_REQUEST_CONFERENCE: |
| // 3GPP 22.030 6.5.5 |
| // "Adds a held call to the conversation" |
| at_send_command("AT+CHLD=3", NULL); |
| |
| /* success or failure is ignored by the upper layer here. |
| it will call GET_CURRENT_CALLS and determine success that way */ |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, NULL, 0); |
| break; |
| case RIL_REQUEST_UDUB: |
| /* user determined user busy */ |
| /* sometimes used: ATH */ |
| at_send_command("ATH", NULL); |
| |
| /* success or failure is ignored by the upper layer here. |
| it will call GET_CURRENT_CALLS and determine success that way */ |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, NULL, 0); |
| break; |
| |
| case RIL_REQUEST_SEPARATE_CONNECTION: |
| { |
| char cmd[12]; |
| int party = ((int*)data)[0]; |
| |
| // Make sure that party is in a valid range. |
| // (Note: The Telephony middle layer imposes a range of 1 to 7. |
| // It's sufficient for us to just make sure it's single digit.) |
| if (party > 0 && party < 10) { |
| sprintf(cmd, "AT+CHLD=2%d", party); |
| at_send_command(cmd, NULL); |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, NULL, 0); |
| } else { |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| } |
| } |
| break; |
| |
| case RIL_REQUEST_SIGNAL_STRENGTH: |
| requestSignalStrength(data, datalen, t); |
| break; |
| case RIL_REQUEST_VOICE_REGISTRATION_STATE: |
| case RIL_REQUEST_DATA_REGISTRATION_STATE: |
| requestRegistrationState(request, data, datalen, t); |
| break; |
| case RIL_REQUEST_OPERATOR: |
| requestOperator(data, datalen, t); |
| break; |
| case RIL_REQUEST_RADIO_POWER: |
| requestRadioPower(data, datalen, t); |
| break; |
| case RIL_REQUEST_DTMF: { |
| char c = ((char *)data)[0]; |
| char *cmd; |
| asprintf(&cmd, "AT+VTS=%c", (int)c); |
| at_send_command(cmd, NULL); |
| free(cmd); |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, NULL, 0); |
| break; |
| } |
| case RIL_REQUEST_SEND_SMS: |
| requestSendSMS(data, datalen, t); |
| break; |
| case RIL_REQUEST_SETUP_DATA_CALL: |
| requestSetupDataCall(data, datalen, t); |
| break; |
| case RIL_REQUEST_SMS_ACKNOWLEDGE: |
| requestSMSAcknowledge(data, datalen, t); |
| break; |
| |
| case RIL_REQUEST_GET_IMSI: |
| p_response = NULL; |
| err = at_send_command_numeric("AT+CIMI", &p_response); |
| |
| if (err < 0 || p_response->success == 0) { |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| } else { |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, |
| p_response->p_intermediates->line, sizeof(char *)); |
| } |
| at_response_free(p_response); |
| break; |
| |
| case RIL_REQUEST_GET_IMEI: |
| p_response = NULL; |
| err = at_send_command_numeric("AT+CGSN", &p_response); |
| |
| if (err < 0 || p_response->success == 0) { |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| } else { |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, |
| p_response->p_intermediates->line, sizeof(char *)); |
| } |
| at_response_free(p_response); |
| break; |
| |
| case RIL_REQUEST_SIM_IO: |
| requestSIM_IO(data,datalen,t); |
| break; |
| |
| case RIL_REQUEST_SEND_USSD: |
| requestSendUSSD(data, datalen, t); |
| break; |
| |
| case RIL_REQUEST_CANCEL_USSD: |
| p_response = NULL; |
| err = at_send_command_numeric("AT+CUSD=2", &p_response); |
| |
| if (err < 0 || p_response->success == 0) { |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| } else { |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, |
| p_response->p_intermediates->line, sizeof(char *)); |
| } |
| at_response_free(p_response); |
| break; |
| |
| case RIL_REQUEST_SET_NETWORK_SELECTION_AUTOMATIC: |
| at_send_command("AT+COPS=0", NULL); |
| break; |
| |
| case RIL_REQUEST_DATA_CALL_LIST: |
| requestDataCallList(data, datalen, t); |
| break; |
| |
| case RIL_REQUEST_QUERY_NETWORK_SELECTION_MODE: |
| requestQueryNetworkSelectionMode(data, datalen, t); |
| break; |
| |
| case RIL_REQUEST_OEM_HOOK_RAW: |
| // echo back data |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, data, datalen); |
| break; |
| |
| |
| case RIL_REQUEST_OEM_HOOK_STRINGS: { |
| int i; |
| const char ** cur; |
| |
| ALOGD("got OEM_HOOK_STRINGS: 0x%8p %lu", data, (long)datalen); |
| |
| |
| for (i = (datalen / sizeof (char *)), cur = (const char **)data ; |
| i > 0 ; cur++, i --) { |
| ALOGD("> '%s'", *cur); |
| } |
| |
| // echo back strings |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, data, datalen); |
| break; |
| } |
| |
| case RIL_REQUEST_WRITE_SMS_TO_SIM: |
| requestWriteSmsToSim(data, datalen, t); |
| break; |
| |
| case RIL_REQUEST_DELETE_SMS_ON_SIM: { |
| char * cmd; |
| p_response = NULL; |
| asprintf(&cmd, "AT+CMGD=%d", ((int *)data)[0]); |
| err = at_send_command(cmd, &p_response); |
| free(cmd); |
| if (err < 0 || p_response->success == 0) { |
| RIL_onRequestComplete(t, RIL_E_GENERIC_FAILURE, NULL, 0); |
| } else { |
| RIL_onRequestComplete(t, RIL_E_SUCCESS, NULL, 0); |
| } |
| at_response_free(p_response); |
| break; |
| } |
| |
| case RIL_REQUEST_ENTER_SIM_PIN: |
| case RIL_REQUEST_ENTER_SIM_PUK: |
| case RIL_REQUEST_ENTER_SIM_PIN2: |
| case RIL_REQUEST_ENTER_SIM_PUK2: |
| case RIL_REQUEST_CHANGE_SIM_PIN: |
| case RIL_REQUEST_CHANGE_SIM_PIN2: |
| requestEnterSimPin(data, datalen, t); |
| break; |
| |
| default: |
| RIL_onRequestComplete(t, RIL_E_REQUEST_NOT_SUPPORTED, NULL, 0); |
| break; |
| } |
| } |
| |
| /** |
| * Synchronous call from the RIL to us to return current radio state. |
| * RADIO_STATE_UNAVAILABLE should be the initial state. |
| */ |
| static RIL_RadioState |
| currentState() |
| { |
| return sState; |
| } |
| /** |
| * Call from RIL to us to find out whether a specific request code |
| * is supported by this implementation. |
| * |
| * Return 1 for "supported" and 0 for "unsupported" |
| */ |
| |
| static int |
| onSupports (int requestCode) |
| { |
| //@@@ todo |
| |
| return 1; |
| } |
| |
| static void onCancel (RIL_Token t) |
| { |
| //@@@todo |
| |
| } |
| |
| static const char * getVersion(void) |
| { |
| return "android reference-ril 1.0"; |
| } |
| |
| static void |
| setRadioState(RIL_RadioState newState) |
| { |
| RIL_RadioState oldState; |
| |
| pthread_mutex_lock(&s_state_mutex); |
| |
| oldState = sState; |
| |
| if (s_closed > 0) { |
| // If we're closed, the only reasonable state is |
| // RADIO_STATE_UNAVAILABLE |
| // This is here because things on the main thread |
| // may attempt to change the radio state after the closed |
| // event happened in another thread |
| newState = RADIO_STATE_UNAVAILABLE; |
| } |
| |
| if (sState != newState || s_closed > 0) { |
| sState = newState; |
| |
| pthread_cond_broadcast (&s_state_cond); |
| } |
| |
| pthread_mutex_unlock(&s_state_mutex); |
| |
| |
| /* do these outside of the mutex */ |
| if (sState != oldState) { |
| RIL_onUnsolicitedResponse (RIL_UNSOL_RESPONSE_RADIO_STATE_CHANGED, |
| NULL, 0); |
| |
| /* FIXME onSimReady() and onRadioPowerOn() cannot be called |
| * from the AT reader thread |
| * Currently, this doesn't happen, but if that changes then these |
| * will need to be dispatched on the request thread |
| */ |
| if (sState == RADIO_STATE_SIM_READY) { |
| onSIMReady(); |
| } else if (sState == RADIO_STATE_SIM_NOT_READY) { |
| onRadioPowerOn(); |
| } |
| } |
| } |
| |
| /** Returns SIM_NOT_READY on error */ |
| static SIM_Status |
| getSIMStatus() |
| { |
| ATResponse *p_response = NULL; |
| int err; |
| int ret; |
| char *cpinLine; |
| char *cpinResult; |
| |
| if (sState == RADIO_STATE_OFF || sState == RADIO_STATE_UNAVAILABLE) { |
| ret = SIM_NOT_READY; |
| goto done; |
| } |
| |
| err = at_send_command_singleline("AT+CPIN?", "+CPIN:", &p_response); |
| |
| if (err != 0) { |
| ret = SIM_NOT_READY; |
| goto done; |
| } |
| |
| switch (at_get_cme_error(p_response)) { |
| case CME_SUCCESS: |
| break; |
| |
| case CME_SIM_NOT_INSERTED: |
| ret = SIM_ABSENT; |
| goto done; |
| |
| default: |
| ret = SIM_NOT_READY; |
| goto done; |
| } |
| |
| /* CPIN? has succeeded, now look at the result */ |
| |
| cpinLine = p_response->p_intermediates->line; |
| err = at_tok_start (&cpinLine); |
| |
| if (err < 0) { |
| ret = SIM_NOT_READY; |
| goto done; |
| } |
| |
| err = at_tok_nextstr(&cpinLine, &cpinResult); |
| |
| if (err < 0) { |
| ret = SIM_NOT_READY; |
| goto done; |
| } |
| |
| if (0 == strcmp (cpinResult, "SIM PIN")) { |
| ret = SIM_PIN; |
| goto done; |
| } else if (0 == strcmp (cpinResult, "SIM PUK")) { |
| ret = SIM_PUK; |
| goto done; |
| } else if (0 == strcmp (cpinResult, "PH-NET PIN")) { |
| return SIM_NETWORK_PERSONALIZATION; |
| } else if (0 != strcmp (cpinResult, "READY")) { |
| /* we're treating unsupported lock types as "sim absent" */ |
| ret = SIM_ABSENT; |
| goto done; |
| } |
| |
| at_response_free(p_response); |
| p_response = NULL; |
| cpinResult = NULL; |
| |
| ret = SIM_READY; |
| |
| done: |
| at_response_free(p_response); |
| return ret; |
| } |
| |
| |
| /** |
| * Get the current card status. |
| * |
| * This must be freed using freeCardStatus. |
| * @return: On success returns RIL_E_SUCCESS |
| */ |
| static int getCardStatus(RIL_CardStatus_v6 **pp_card_status) { |
| static RIL_AppStatus app_status_array[] = { |
| // SIM_ABSENT = 0 |
| { RIL_APPTYPE_UNKNOWN, RIL_APPSTATE_UNKNOWN, RIL_PERSOSUBSTATE_UNKNOWN, |
| NULL, NULL, 0, RIL_PINSTATE_UNKNOWN, RIL_PINSTATE_UNKNOWN }, |
| // SIM_NOT_READY = 1 |
| { RIL_APPTYPE_SIM, RIL_APPSTATE_DETECTED, RIL_PERSOSUBSTATE_UNKNOWN, |
| NULL, NULL, 0, RIL_PINSTATE_UNKNOWN, RIL_PINSTATE_UNKNOWN }, |
| // SIM_READY = 2 |
| { RIL_APPTYPE_SIM, RIL_APPSTATE_READY, RIL_PERSOSUBSTATE_READY, |
| NULL, NULL, 0, RIL_PINSTATE_UNKNOWN, RIL_PINSTATE_UNKNOWN }, |
| // SIM_PIN = 3 |
| { RIL_APPTYPE_SIM, RIL_APPSTATE_PIN, RIL_PERSOSUBSTATE_UNKNOWN, |
| NULL, NULL, 0, RIL_PINSTATE_ENABLED_NOT_VERIFIED, RIL_PINSTATE_UNKNOWN }, |
| // SIM_PUK = 4 |
| { RIL_APPTYPE_SIM, RIL_APPSTATE_PUK, RIL_PERSOSUBSTATE_UNKNOWN, |
| NULL, NULL, 0, RIL_PINSTATE_ENABLED_BLOCKED, RIL_PINSTATE_UNKNOWN }, |
| // SIM_NETWORK_PERSONALIZATION = 5 |
| { RIL_APPTYPE_SIM, RIL_APPSTATE_SUBSCRIPTION_PERSO, RIL_PERSOSUBSTATE_SIM_NETWORK, |
| NULL, NULL, 0, RIL_PINSTATE_ENABLED_NOT_VERIFIED, RIL_PINSTATE_UNKNOWN } |
| }; |
| RIL_CardState card_state; |
| int num_apps; |
| |
| int sim_status = getSIMStatus(); |
| if (sim_status == SIM_ABSENT) { |
| card_state = RIL_CARDSTATE_ABSENT; |
| num_apps = 0; |
| } else { |
| card_state = RIL_CARDSTATE_PRESENT; |
| num_apps = 1; |
| } |
| |
| // Allocate and initialize base card status. |
| RIL_CardStatus_v6 *p_card_status = malloc(sizeof(RIL_CardStatus_v6)); |
| p_card_status->card_state = card_state; |
| p_card_status->universal_pin_state = RIL_PINSTATE_UNKNOWN; |
| p_card_status->gsm_umts_subscription_app_index = RIL_CARD_MAX_APPS; |
| p_card_status->cdma_subscription_app_index = RIL_CARD_MAX_APPS; |
| p_card_status->ims_subscription_app_index = RIL_CARD_MAX_APPS; |
| p_card_status->num_applications = num_apps; |
| |
| // Initialize application status |
| int i; |
| for (i = 0; i < RIL_CARD_MAX_APPS; i++) { |
| p_card_status->applications[i] = app_status_array[SIM_ABSENT]; |
| } |
| |
| // Pickup the appropriate application status |
| // that reflects sim_status for gsm. |
| if (num_apps != 0) { |
| // Only support one app, gsm |
| p_card_status->num_applications = 1; |
| p_card_status->gsm_umts_subscription_app_index = 0; |
| |
| // Get the correct app status |
| p_card_status->applications[0] = app_status_array[sim_status]; |
| } |
| |
| *pp_card_status = p_card_status; |
| return RIL_E_SUCCESS; |
| } |
| |
| /** |
| * Free the card status returned by getCardStatus |
| */ |
| static void freeCardStatus(RIL_CardStatus_v6 *p_card_status) { |
| free(p_card_status); |
| } |
| |
| /** |
| * SIM ready means any commands that access the SIM will work, including: |
| * AT+CPIN, AT+CSMS, AT+CNMI, AT+CRSM |
| * (all SMS-related commands) |
| */ |
| |
| static void pollSIMState (void *param) |
| { |
| ATResponse *p_response; |
| int ret; |
| |
| if (sState != RADIO_STATE_SIM_NOT_READY) { |
| // no longer valid to poll |
| return; |
| } |
| |
| switch(getSIMStatus()) { |
| case SIM_ABSENT: |
| case SIM_PIN: |
| case SIM_PUK: |
| case SIM_NETWORK_PERSONALIZATION: |
| default: |
| setRadioState(RADIO_STATE_SIM_LOCKED_OR_ABSENT); |
| return; |
| |
| case SIM_NOT_READY: |
| RIL_requestTimedCallback (pollSIMState, NULL, &TIMEVAL_SIMPOLL); |
| return; |
| |
| case SIM_READY: |
| setRadioState(RADIO_STATE_SIM_READY); |
| return; |
| } |
| } |
| |
| /** returns 1 if on, 0 if off, and -1 on error */ |
| static int isRadioOn() |
| { |
| ATResponse *p_response = NULL; |
| int err; |
| char *line; |
| char ret; |
| |
| err = at_send_command_singleline("AT+CFUN?", "+CFUN:", &p_response); |
| |
| if (err < 0 || p_response->success == 0) { |
| // assume radio is off |
| goto error; |
| } |
| |
| line = p_response->p_intermediates->line; |
| |
| err = at_tok_start(&line); |
| if (err < 0) goto error; |
| |
| err = at_tok_nextbool(&line, &ret); |
| if (err < 0) goto error; |
| |
| at_response_free(p_response); |
| |
| return (int)ret; |
| |
| error: |
| |
| at_response_free(p_response); |
| return -1; |
| } |
| |
| /** |
| * Initialize everything that can be configured while we're still in |
| * AT+CFUN=0 |
| */ |
| static void initializeCallback(void *param) |
| { |
| ATResponse *p_response = NULL; |
| int err; |
| |
| setRadioState (RADIO_STATE_OFF); |
| |
| at_handshake(); |
| |
| /* note: we don't check errors here. Everything important will |
| be handled in onATTimeout and onATReaderClosed */ |
| |
| /* atchannel is tolerant of echo but it must */ |
| /* have verbose result codes */ |
| at_send_command("ATE0Q0V1", NULL); |
| |
| /* No auto-answer */ |
| at_send_command("ATS0=0", NULL); |
| |
| /* Extended errors */ |
| at_send_command("AT+CMEE=1", NULL); |
| |
| /* Network registration events */ |
| err = at_send_command("AT+CREG=2", &p_response); |
| |
| /* some handsets -- in tethered mode -- don't support CREG=2 */ |
| if (err < 0 || p_response->success == 0) { |
| at_send_command("AT+CREG=1", NULL); |
| } |
| |
| at_response_free(p_response); |
| |
| /* GPRS registration events */ |
| at_send_command("AT+CGREG=1", NULL); |
| |
| /* Call Waiting notifications */ |
| at_send_command("AT+CCWA=1", NULL); |
| |
| /* Alternating voice/data off */ |
| at_send_command("AT+CMOD=0", NULL); |
| |
| /* Not muted */ |
| at_send_command("AT+CMUT=0", NULL); |
| |
| /* +CSSU unsolicited supp service notifications */ |
| at_send_command("AT+CSSN=0,1", NULL); |
| |
| /* no connected line identification */ |
| at_send_command("AT+COLP=0", NULL); |
| |
| /* HEX character set */ |
| at_send_command("AT+CSCS=\"HEX\"", NULL); |
| |
| /* USSD unsolicited */ |
| at_send_command("AT+CUSD=1", NULL); |
| |
| /* Enable +CGEV GPRS event notifications, but don't buffer */ |
| at_send_command("AT+CGEREP=1,0", NULL); |
| |
| /* SMS PDU mode */ |
| at_send_command("AT+CMGF=0", NULL); |
| |
| #ifdef USE_TI_COMMANDS |
| |
| at_send_command("AT%CPI=3", NULL); |
| |
| /* TI specific -- notifications when SMS is ready (currently ignored) */ |
| at_send_command("AT%CSTAT=1", NULL); |
| |
| #endif /* USE_TI_COMMANDS */ |
| |
| |
| /* assume radio is off on error */ |
| if (isRadioOn() > 0) { |
| setRadioState (RADIO_STATE_SIM_NOT_READY); |
| } |
| } |
| |
| static void waitForClose() |
| { |
| pthread_mutex_lock(&s_state_mutex); |
| |
| while (s_closed == 0) { |
| pthread_cond_wait(&s_state_cond, &s_state_mutex); |
| } |
| |
| pthread_mutex_unlock(&s_state_mutex); |
| } |
| |
| /** |
| * Called by atchannel when an unsolicited line appears |
| * This is called on atchannel's reader thread. AT commands may |
| * not be issued here |
| */ |
| static void onUnsolicited (const char *s, const char *sms_pdu) |
| { |
| char *line = NULL; |
| int err; |
| |
| /* Ignore unsolicited responses until we're initialized. |
| * This is OK because the RIL library will poll for initial state |
| */ |
| if (sState == RADIO_STATE_UNAVAILABLE) { |
| return; |
| } |
| |
| if (strStartsWith(s, "%CTZV:")) { |
| /* TI specific -- NITZ time */ |
| char *response; |
| |
| line = strdup(s); |
| at_tok_start(&line); |
| |
| err = at_tok_nextstr(&line, &response); |
| |
| if (err != 0) { |
| ALOGE("invalid NITZ line %s\n", s); |
| } else { |
| RIL_onUnsolicitedResponse ( |
| RIL_UNSOL_NITZ_TIME_RECEIVED, |
| response, strlen(response)); |
| } |
| } else if (strStartsWith(s,"+CRING:") |
| || strStartsWith(s,"RING") |
| || strStartsWith(s,"NO CARRIER") |
| || strStartsWith(s,"+CCWA") |
| ) { |
| RIL_onUnsolicitedResponse ( |
| RIL_UNSOL_RESPONSE_CALL_STATE_CHANGED, |
| NULL, 0); |
| #ifdef WORKAROUND_FAKE_CGEV |
| RIL_requestTimedCallback (onDataCallListChanged, NULL, NULL); //TODO use new function |
| #endif /* WORKAROUND_FAKE_CGEV */ |
| } else if (strStartsWith(s,"+CREG:") |
| || strStartsWith(s,"+CGREG:") |
| ) { |
| RIL_onUnsolicitedResponse ( |
| RIL_UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED, |
| NULL, 0); |
| #ifdef WORKAROUND_FAKE_CGEV |
| RIL_requestTimedCallback (onDataCallListChanged, NULL, NULL); |
| #endif /* WORKAROUND_FAKE_CGEV */ |
| } else if (strStartsWith(s, "+CMT:")) { |
| RIL_onUnsolicitedResponse ( |
| RIL_UNSOL_RESPONSE_NEW_SMS, |
| sms_pdu, strlen(sms_pdu)); |
| } else if (strStartsWith(s, "+CDS:")) { |
| RIL_onUnsolicitedResponse ( |
| RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT, |
| sms_pdu, strlen(sms_pdu)); |
| } else if (strStartsWith(s, "+CGEV:")) { |
| /* Really, we can ignore NW CLASS and ME CLASS events here, |
| * but right now we don't since extranous |
| * RIL_UNSOL_DATA_CALL_LIST_CHANGED calls are tolerated |
| */ |
| /* can't issue AT commands here -- call on main thread */ |
| RIL_requestTimedCallback (onDataCallListChanged, NULL, NULL); |
| #ifdef WORKAROUND_FAKE_CGEV |
| } else if (strStartsWith(s, "+CME ERROR: 150")) { |
| RIL_requestTimedCallback (onDataCallListChanged, NULL, NULL); |
| #endif /* WORKAROUND_FAKE_CGEV */ |
| } |
| } |
| |
| /* Called on command or reader thread */ |
| static void onATReaderClosed() |
| { |
| ALOGI("AT channel closed\n"); |
| at_close(); |
| s_closed = 1; |
| |
| setRadioState (RADIO_STATE_UNAVAILABLE); |
| } |
| |
| /* Called on command thread */ |
| static void onATTimeout() |
| { |
| ALOGI("AT channel timeout; closing\n"); |
| at_close(); |
| |
| s_closed = 1; |
| |
| /* FIXME cause a radio reset here */ |
| |
| setRadioState (RADIO_STATE_UNAVAILABLE); |
| } |
| |
| static void usage(char *s) |
| { |
| #ifdef RIL_SHLIB |
| fprintf(stderr, "reference-ril requires: -p <tcp port> or -d /dev/tty_device\n"); |
| #else |
| fprintf(stderr, "usage: %s [-p <tcp port>] [-d /dev/tty_device]\n", s); |
| exit(-1); |
| #endif |
| } |
| |
| static void * |
| mainLoop(void *param) |
| { |
| int fd; |
| int ret; |
| |
| AT_DUMP("== ", "entering mainLoop()", -1 ); |
| at_set_on_reader_closed(onATReaderClosed); |
| at_set_on_timeout(onATTimeout); |
| |
| for (;;) { |
| fd = -1; |
| while (fd < 0) { |
| if (s_port > 0) { |
| fd = socket_loopback_client(s_port, SOCK_STREAM); |
| } else if (s_device_socket) { |
| if (!strcmp(s_device_path, "/dev/socket/qemud")) { |
| /* Before trying to connect to /dev/socket/qemud (which is |
| * now another "legacy" way of communicating with the |
| * emulator), we will try to connecto to gsm service via |
| * qemu pipe. */ |
| fd = qemu_pipe_open("qemud:gsm"); |
| if (fd < 0) { |
| /* Qemu-specific control socket */ |
| fd = socket_local_client( "qemud", |
| ANDROID_SOCKET_NAMESPACE_RESERVED, |
| SOCK_STREAM ); |
| if (fd >= 0 ) { |
| char answer[2]; |
| |
| if ( write(fd, "gsm", 3) != 3 || |
| read(fd, answer, 2) != 2 || |
| memcmp(answer, "OK", 2) != 0) |
| { |
| close(fd); |
| fd = -1; |
| } |
| } |
| } |
| } |
| else |
| fd = socket_local_client( s_device_path, |
| ANDROID_SOCKET_NAMESPACE_FILESYSTEM, |
| SOCK_STREAM ); |
| } else if (s_device_path != NULL) { |
| fd = open (s_device_path, O_RDWR); |
| if ( fd >= 0 && !memcmp( s_device_path, "/dev/ttyS", 9 ) ) { |
| /* disable echo on serial ports */ |
| struct termios ios; |
| tcgetattr( fd, &ios ); |
| ios.c_lflag = 0; /* disable ECHO, ICANON, etc... */ |
| tcsetattr( fd, TCSANOW, &ios ); |
| } |
| } |
| |
| if (fd < 0) { |
| perror ("opening AT interface. retrying..."); |
| sleep(10); |
| /* never returns */ |
| } |
| } |
| |
| s_closed = 0; |
| ret = at_open(fd, onUnsolicited); |
| |
| if (ret < 0) { |
| ALOGE ("AT error %d on at_open\n", ret); |
| return 0; |
| } |
| |
| RIL_requestTimedCallback(initializeCallback, NULL, &TIMEVAL_0); |
| |
| // Give initializeCallback a chance to dispatched, since |
| // we don't presently have a cancellation mechanism |
| sleep(1); |
| |
| waitForClose(); |
| ALOGI("Re-opening after close"); |
| } |
| } |
| |
| #ifdef RIL_SHLIB |
| |
| pthread_t s_tid_mainloop; |
| |
| const RIL_RadioFunctions *RIL_Init(const struct RIL_Env *env, int argc, char **argv) |
| { |
| int ret; |
| int fd = -1; |
| int opt; |
| pthread_attr_t attr; |
| |
| s_rilenv = env; |
| |
| while ( -1 != (opt = getopt(argc, argv, "p:d:s:"))) { |
| switch (opt) { |
| case 'p': |
| s_port = atoi(optarg); |
| if (s_port == 0) { |
| usage(argv[0]); |
| return NULL; |
| } |
| ALOGI("Opening loopback port %d\n", s_port); |
| break; |
| |
| case 'd': |
| s_device_path = optarg; |
| ALOGI("Opening tty device %s\n", s_device_path); |
| break; |
| |
| case 's': |
| s_device_path = optarg; |
| s_device_socket = 1; |
| ALOGI("Opening socket %s\n", s_device_path); |
| break; |
| |
| default: |
| usage(argv[0]); |
| return NULL; |
| } |
| } |
| |
| if (s_port < 0 && s_device_path == NULL) { |
| usage(argv[0]); |
| return NULL; |
| } |
| |
| pthread_attr_init (&attr); |
| pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED); |
| ret = pthread_create(&s_tid_mainloop, &attr, mainLoop, NULL); |
| |
| return &s_callbacks; |
| } |
| #else /* RIL_SHLIB */ |
| int main (int argc, char **argv) |
| { |
| int ret; |
| int fd = -1; |
| int opt; |
| |
| while ( -1 != (opt = getopt(argc, argv, "p:d:"))) { |
| switch (opt) { |
| case 'p': |
| s_port = atoi(optarg); |
| if (s_port == 0) { |
| usage(argv[0]); |
| } |
| ALOGI("Opening loopback port %d\n", s_port); |
| break; |
| |
| case 'd': |
| s_device_path = optarg; |
| ALOGI("Opening tty device %s\n", s_device_path); |
| break; |
| |
| case 's': |
| s_device_path = optarg; |
| s_device_socket = 1; |
| ALOGI("Opening socket %s\n", s_device_path); |
| break; |
| |
| default: |
| usage(argv[0]); |
| } |
| } |
| |
| if (s_port < 0 && s_device_path == NULL) { |
| usage(argv[0]); |
| } |
| |
| RIL_register(&s_callbacks); |
| |
| mainLoop(NULL); |
| |
| return 0; |
| } |
| |
| #endif /* RIL_SHLIB */ |