| /* |
| * Copyright (C) Texas Instruments - http://www.ti.com/ |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <errno.h> |
| #include <malloc.h> |
| #include <stdlib.h> |
| #include <stdarg.h> |
| #include <fcntl.h> |
| #include <poll.h> |
| #include <sys/ioctl.h> |
| #include <linux/fb.h> |
| #include <linux/omapfb.h> |
| #include <sys/mman.h> |
| #include <sys/resource.h> |
| |
| #include <cutils/properties.h> |
| #include <cutils/log.h> |
| #include <cutils/native_handle.h> |
| #define HWC_REMOVE_DEPRECATED_VERSIONS 1 |
| #include <hardware/hardware.h> |
| #include <hardware/hwcomposer.h> |
| #include <EGL/egl.h> |
| #include <hardware_legacy/uevent.h> |
| #include <png.h> |
| |
| #include <system/graphics.h> |
| |
| #define ASPECT_RATIO_TOLERANCE 0.02f |
| |
| #define min(a, b) ( { typeof(a) __a = (a), __b = (b); __a < __b ? __a : __b; } ) |
| #define max(a, b) ( { typeof(a) __a = (a), __b = (b); __a > __b ? __a : __b; } ) |
| #define swap(a, b) do { typeof(a) __a = (a); (a) = (b); (b) = __a; } while (0) |
| |
| #define WIDTH(rect) ((rect).right - (rect).left) |
| #define HEIGHT(rect) ((rect).bottom - (rect).top) |
| |
| #define DIV_ROUND_UP(a, b) (((a) + (b) - 1) / (b)) |
| |
| #include <video/dsscomp.h> |
| |
| #include "hal_public.h" |
| |
| #define MAX_HW_OVERLAYS 4 |
| #define NUM_NONSCALING_OVERLAYS 1 |
| #define HAL_PIXEL_FORMAT_BGRX_8888 0x1FF |
| #define HAL_PIXEL_FORMAT_TI_NV12 0x100 |
| #define HAL_PIXEL_FORMAT_TI_NV12_PADDED 0x101 |
| #define MAX_TILER_SLOT (16 << 20) |
| |
| struct ext_transform_t { |
| __u8 rotation : 3; /* 90-degree clockwise rotations */ |
| __u8 hflip : 1; /* flip l-r (after rotation) */ |
| __u8 enabled : 1; /* cloning enabled */ |
| __u8 docking : 1; /* docking vs. mirroring - used for state */ |
| }; |
| |
| /* cloning support and state */ |
| struct omap4_hwc_ext { |
| /* support */ |
| struct ext_transform_t mirror; /* mirroring settings */ |
| struct ext_transform_t dock; /* docking settings */ |
| float lcd_xpy; /* pixel ratio for UI */ |
| __u8 avoid_mode_change; /* use HDMI mode used for mirroring if possible */ |
| __u8 force_dock; /* must dock */ |
| __u8 hdmi_state; /* whether HDMI is connected */ |
| |
| /* state */ |
| __u8 on_tv; /* using a tv */ |
| struct ext_transform_t current; /* current settings */ |
| struct ext_transform_t last; /* last-used settings */ |
| |
| /* configuration */ |
| __u32 last_xres_used; /* resolution and pixel ratio used for mode selection */ |
| __u32 last_yres_used; |
| __u32 last_mode; /* 2-s complement of last HDMI mode set, 0 if none */ |
| __u32 mirror_mode; /* 2-s complement of mode used when mirroring */ |
| float last_xpy; |
| __u16 width; /* external screen dimensions */ |
| __u16 height; |
| __u32 xres; /* external screen resolution */ |
| __u32 yres; |
| float m[2][3]; /* external transformation matrix */ |
| hwc_rect_t mirror_region; /* region of screen to mirror */ |
| }; |
| typedef struct omap4_hwc_ext omap4_hwc_ext_t; |
| |
| /* used by property settings */ |
| enum { |
| EXT_ROTATION = 3, /* rotation while mirroring */ |
| EXT_HFLIP = (1 << 2), /* flip l-r on output (after rotation) */ |
| }; |
| |
| /* ARGB image */ |
| struct omap4_hwc_img { |
| int width; |
| int height; |
| int rowbytes; |
| int size; |
| unsigned char *ptr; |
| } dock_image = { .rowbytes = 0 }; |
| |
| struct omap4_hwc_module { |
| hwc_module_t base; |
| |
| IMG_framebuffer_device_public_t *fb_dev; |
| }; |
| typedef struct omap4_hwc_module omap4_hwc_module_t; |
| |
| struct omap4_hwc_device { |
| /* static data */ |
| hwc_composer_device_1_t base; |
| hwc_procs_t *procs; |
| pthread_t hdmi_thread; |
| pthread_mutex_t lock; |
| |
| IMG_framebuffer_device_public_t *fb_dev; |
| struct dsscomp_display_info fb_dis; |
| int fb_fd; /* file descriptor for /dev/fb0 */ |
| int dsscomp_fd; /* file descriptor for /dev/dsscomp */ |
| int hdmi_fb_fd; /* file descriptor for /dev/fb1 */ |
| int pipe_fds[2]; /* pipe to event thread */ |
| |
| int img_mem_size; /* size of fb for hdmi */ |
| void *img_mem_ptr; /* start of fb for hdmi */ |
| |
| int flags_rgb_order; |
| int flags_nv12_only; |
| |
| int force_sgx; |
| omap4_hwc_ext_t ext; /* external mirroring data */ |
| int idle; |
| int ovls_blending; |
| |
| /* composition data */ |
| struct dsscomp_setup_dispc_data dsscomp_data; |
| buffer_handle_t *buffers; |
| int use_sgx; |
| int swap_rb; |
| unsigned int post2_layers; |
| int ext_ovls; /* # of overlays on external display for current composition */ |
| int ext_ovls_wanted; /* # of overlays that should be on external display for current composition */ |
| int last_ext_ovls; /* # of overlays on external/internal display for last composition */ |
| int last_int_ovls; |
| }; |
| typedef struct omap4_hwc_device omap4_hwc_device_t; |
| |
| #define HAL_FMT(f) ((f) == HAL_PIXEL_FORMAT_TI_NV12 ? "NV12" : \ |
| (f) == HAL_PIXEL_FORMAT_YV12 ? "YV12" : \ |
| (f) == HAL_PIXEL_FORMAT_BGRX_8888 ? "xRGB32" : \ |
| (f) == HAL_PIXEL_FORMAT_RGBX_8888 ? "xBGR32" : \ |
| (f) == HAL_PIXEL_FORMAT_BGRA_8888 ? "ARGB32" : \ |
| (f) == HAL_PIXEL_FORMAT_RGBA_8888 ? "ABGR32" : \ |
| (f) == HAL_PIXEL_FORMAT_RGB_565 ? "RGB565" : "??") |
| |
| #define DSS_FMT(f) ((f) == OMAP_DSS_COLOR_NV12 ? "NV12" : \ |
| (f) == OMAP_DSS_COLOR_RGB24U ? "xRGB32" : \ |
| (f) == OMAP_DSS_COLOR_ARGB32 ? "ARGB32" : \ |
| (f) == OMAP_DSS_COLOR_RGB16 ? "RGB565" : "??") |
| |
| static int debug = 0; |
| |
| static void dump_layer(hwc_layer_1_t const* l) |
| { |
| ALOGD("\ttype=%d, flags=%08x, handle=%p, tr=%02x, blend=%04x, {%d,%d,%d,%d}, {%d,%d,%d,%d}", |
| l->compositionType, l->flags, l->handle, l->transform, l->blending, |
| l->sourceCrop.left, |
| l->sourceCrop.top, |
| l->sourceCrop.right, |
| l->sourceCrop.bottom, |
| l->displayFrame.left, |
| l->displayFrame.top, |
| l->displayFrame.right, |
| l->displayFrame.bottom); |
| } |
| |
| static void dump_dsscomp(struct dsscomp_setup_dispc_data *d) |
| { |
| unsigned i; |
| |
| ALOGD("[%08x] set: %c%c%c %d ovls\n", |
| d->sync_id, |
| (d->mode & DSSCOMP_SETUP_MODE_APPLY) ? 'A' : '-', |
| (d->mode & DSSCOMP_SETUP_MODE_DISPLAY) ? 'D' : '-', |
| (d->mode & DSSCOMP_SETUP_MODE_CAPTURE) ? 'C' : '-', |
| d->num_ovls); |
| |
| for (i = 0; i < d->num_mgrs; i++) { |
| struct dss2_mgr_info *mi = &d->mgrs[i]; |
| ALOGD(" (dis%d alpha=%d col=%08x ilace=%d)\n", |
| mi->ix, |
| mi->alpha_blending, mi->default_color, |
| mi->interlaced); |
| } |
| |
| for (i = 0; i < d->num_ovls; i++) { |
| struct dss2_ovl_info *oi = &d->ovls[i]; |
| struct dss2_ovl_cfg *c = &oi->cfg; |
| if (c->zonly) |
| ALOGD("ovl%d(%s z%d)\n", |
| c->ix, c->enabled ? "ON" : "off", c->zorder); |
| else |
| ALOGD("ovl%d(%s z%d %s%s *%d%% %d*%d:%d,%d+%d,%d rot%d%s => %d,%d+%d,%d %p/%p|%d)\n", |
| c->ix, c->enabled ? "ON" : "off", c->zorder, DSS_FMT(c->color_mode), |
| c->pre_mult_alpha ? " premult" : "", |
| (c->global_alpha * 100 + 128) / 255, |
| c->width, c->height, c->crop.x, c->crop.y, |
| c->crop.w, c->crop.h, |
| c->rotation, c->mirror ? "+mir" : "", |
| c->win.x, c->win.y, c->win.w, c->win.h, |
| (void *) oi->ba, (void *) oi->uv, c->stride); |
| } |
| } |
| |
| struct dump_buf { |
| char *buf; |
| int buf_len; |
| int len; |
| }; |
| |
| static void dump_printf(struct dump_buf *buf, const char *fmt, ...) |
| { |
| va_list ap; |
| |
| va_start(ap, fmt); |
| buf->len += vsnprintf(buf->buf + buf->len, buf->buf_len - buf->len, fmt, ap); |
| va_end(ap); |
| } |
| |
| static void dump_set_info(omap4_hwc_device_t *hwc_dev, hwc_display_contents_1_t* list) |
| { |
| struct dsscomp_setup_dispc_data *dsscomp = &hwc_dev->dsscomp_data; |
| char logbuf[1024]; |
| struct dump_buf log = { |
| .buf = logbuf, |
| .buf_len = sizeof(logbuf), |
| }; |
| unsigned int i; |
| |
| dump_printf(&log, "set H{"); |
| for (i = 0; list && i < list->numHwLayers; i++) { |
| if (i) |
| dump_printf(&log, " "); |
| hwc_layer_1_t *layer = &list->hwLayers[i]; |
| IMG_native_handle_t *handle = (IMG_native_handle_t *)layer->handle; |
| dump_printf(&log, "%p:%s,", handle, layer->compositionType == HWC_OVERLAY ? "DSS" : "SGX"); |
| if ((layer->flags & HWC_SKIP_LAYER) || !handle) { |
| dump_printf(&log, "SKIP"); |
| continue; |
| } |
| if (layer->flags & HWC_HINT_CLEAR_FB) |
| dump_printf(&log, "CLR,"); |
| dump_printf(&log, "%d*%d(%s)", handle->iWidth, handle->iHeight, HAL_FMT(handle->iFormat)); |
| if (layer->transform) |
| dump_printf(&log, "~%d", layer->transform); |
| } |
| dump_printf(&log, "} D{"); |
| for (i = 0; i < dsscomp->num_ovls; i++) { |
| if (i) |
| dump_printf(&log, " "); |
| dump_printf(&log, "%d=", dsscomp->ovls[i].cfg.ix); |
| if (dsscomp->ovls[i].cfg.enabled) |
| dump_printf(&log, "%08x:%d*%d,%s", |
| dsscomp->ovls[i].ba, |
| dsscomp->ovls[i].cfg.width, |
| dsscomp->ovls[i].cfg.height, |
| DSS_FMT(dsscomp->ovls[i].cfg.color_mode)); |
| else |
| dump_printf(&log, "-"); |
| } |
| dump_printf(&log, "} L{"); |
| for (i = 0; i < hwc_dev->post2_layers; i++) { |
| if (i) |
| dump_printf(&log, " "); |
| dump_printf(&log, "%p", hwc_dev->buffers[i]); |
| } |
| dump_printf(&log, "}%s\n", hwc_dev->use_sgx ? " swap" : ""); |
| |
| ALOGD("%s", log.buf); |
| } |
| |
| static int sync_id = 0; |
| |
| static int omap4_hwc_is_valid_format(int format) |
| { |
| switch(format) { |
| case HAL_PIXEL_FORMAT_RGB_565: |
| case HAL_PIXEL_FORMAT_RGBX_8888: |
| case HAL_PIXEL_FORMAT_RGBA_8888: |
| case HAL_PIXEL_FORMAT_BGRA_8888: |
| case HAL_PIXEL_FORMAT_BGRX_8888: |
| case HAL_PIXEL_FORMAT_TI_NV12: |
| case HAL_PIXEL_FORMAT_TI_NV12_PADDED: |
| return 1; |
| |
| default: |
| return 0; |
| } |
| } |
| |
| static int scaled(hwc_layer_1_t *layer) |
| { |
| int w = WIDTH(layer->sourceCrop); |
| int h = HEIGHT(layer->sourceCrop); |
| |
| if (layer->transform & HWC_TRANSFORM_ROT_90) |
| swap(w, h); |
| |
| return WIDTH(layer->displayFrame) != w || HEIGHT(layer->displayFrame) != h; |
| } |
| |
| static int is_protected(hwc_layer_1_t *layer) |
| { |
| IMG_native_handle_t *handle = (IMG_native_handle_t *)layer->handle; |
| |
| return (handle->usage & GRALLOC_USAGE_PROTECTED); |
| } |
| |
| #define is_BLENDED(layer) ((layer)->blending != HWC_BLENDING_NONE) |
| |
| static int is_RGB(IMG_native_handle_t *handle) |
| { |
| switch(handle->iFormat) |
| { |
| case HAL_PIXEL_FORMAT_BGRA_8888: |
| case HAL_PIXEL_FORMAT_BGRX_8888: |
| case HAL_PIXEL_FORMAT_RGB_565: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| static int is_BGR_format(int format) |
| { |
| switch (format) { |
| case HAL_PIXEL_FORMAT_RGBX_8888: |
| case HAL_PIXEL_FORMAT_RGBA_8888: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| static int is_BGR(IMG_native_handle_t *handle) |
| { |
| return is_BGR_format(handle->iFormat); |
| } |
| |
| static int is_NV12(IMG_native_handle_t *handle) |
| { |
| switch(handle->iFormat) |
| { |
| case HAL_PIXEL_FORMAT_TI_NV12: |
| case HAL_PIXEL_FORMAT_TI_NV12_PADDED: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| static int dockable(hwc_layer_1_t *layer) |
| { |
| IMG_native_handle_t *handle = (IMG_native_handle_t *)layer->handle; |
| |
| return (handle->usage & GRALLOC_USAGE_EXTERNAL_DISP); |
| } |
| |
| static unsigned int mem1d(IMG_native_handle_t *handle) |
| { |
| if (handle == NULL || is_NV12(handle)) |
| return 0; |
| |
| int bpp = handle->iFormat == HAL_PIXEL_FORMAT_RGB_565 ? 2 : 4; |
| int stride = ALIGN(handle->iWidth, HW_ALIGN) * bpp; |
| return stride * handle->iHeight; |
| } |
| |
| static void |
| omap4_hwc_setup_layer_base(struct dss2_ovl_cfg *oc, int index, int format, int blended, int width, int height) |
| { |
| unsigned int bits_per_pixel; |
| |
| /* YUV2RGB conversion */ |
| const struct omap_dss_cconv_coefs ctbl_bt601_5 = { |
| 298, 409, 0, 298, -208, -100, 298, 0, 517, 0, |
| }; |
| |
| /* convert color format */ |
| switch (format) { |
| case HAL_PIXEL_FORMAT_RGBA_8888: |
| case HAL_PIXEL_FORMAT_BGRA_8888: |
| oc->color_mode = OMAP_DSS_COLOR_ARGB32; |
| bits_per_pixel = 32; |
| if (blended) |
| break; |
| |
| case HAL_PIXEL_FORMAT_RGBX_8888: |
| case HAL_PIXEL_FORMAT_BGRX_8888: |
| oc->color_mode = OMAP_DSS_COLOR_RGB24U; |
| bits_per_pixel = 32; |
| break; |
| |
| case HAL_PIXEL_FORMAT_RGB_565: |
| oc->color_mode = OMAP_DSS_COLOR_RGB16; |
| bits_per_pixel = 16; |
| break; |
| |
| case HAL_PIXEL_FORMAT_TI_NV12: |
| case HAL_PIXEL_FORMAT_TI_NV12_PADDED: |
| oc->color_mode = OMAP_DSS_COLOR_NV12; |
| bits_per_pixel = 8; |
| oc->cconv = ctbl_bt601_5; |
| break; |
| |
| default: |
| /* Should have been filtered out */ |
| ALOGV("Unsupported pixel format"); |
| return; |
| } |
| |
| oc->width = width; |
| oc->height = height; |
| oc->stride = ALIGN(width, HW_ALIGN) * bits_per_pixel / 8; |
| |
| oc->enabled = 1; |
| oc->global_alpha = 255; |
| oc->zorder = index; |
| oc->ix = 0; |
| |
| /* defaults for SGX framebuffer renders */ |
| oc->crop.w = oc->win.w = width; |
| oc->crop.h = oc->win.h = height; |
| |
| /* for now interlacing and vc1 info is not supplied */ |
| oc->ilace = OMAP_DSS_ILACE_NONE; |
| oc->vc1.enable = 0; |
| } |
| |
| static void |
| omap4_hwc_setup_layer(omap4_hwc_device_t *hwc_dev, struct dss2_ovl_info *ovl, |
| hwc_layer_1_t *layer, int index, |
| int format, int width, int height) |
| { |
| struct dss2_ovl_cfg *oc = &ovl->cfg; |
| |
| //dump_layer(layer); |
| |
| omap4_hwc_setup_layer_base(oc, index, format, is_BLENDED(layer), width, height); |
| |
| /* convert transformation - assuming 0-set config */ |
| if (layer->transform & HWC_TRANSFORM_FLIP_H) |
| oc->mirror = 1; |
| if (layer->transform & HWC_TRANSFORM_FLIP_V) { |
| oc->rotation = 2; |
| oc->mirror = !oc->mirror; |
| } |
| if (layer->transform & HWC_TRANSFORM_ROT_90) { |
| oc->rotation += oc->mirror ? -1 : 1; |
| oc->rotation &= 3; |
| } |
| |
| oc->pre_mult_alpha = layer->blending == HWC_BLENDING_PREMULT; |
| |
| /* display position */ |
| oc->win.x = layer->displayFrame.left; |
| oc->win.y = layer->displayFrame.top; |
| oc->win.w = WIDTH(layer->displayFrame); |
| oc->win.h = HEIGHT(layer->displayFrame); |
| |
| /* crop */ |
| oc->crop.x = layer->sourceCrop.left; |
| oc->crop.y = layer->sourceCrop.top; |
| oc->crop.w = WIDTH(layer->sourceCrop); |
| oc->crop.h = HEIGHT(layer->sourceCrop); |
| } |
| |
| const float m_unit[2][3] = { { 1., 0., 0. }, { 0., 1., 0. } }; |
| |
| static inline void m_translate(float m[2][3], int dx, int dy) |
| { |
| m[0][2] += dx; |
| m[1][2] += dy; |
| } |
| |
| static inline void m_scale1(float m[3], int from, int to) |
| { |
| m[0] = m[0] * to / from; |
| m[1] = m[1] * to / from; |
| m[2] = m[2] * to / from; |
| } |
| |
| static inline void m_scale(float m[2][3], int x_from, int x_to, int y_from, int y_to) |
| { |
| m_scale1(m[0], x_from, x_to); |
| m_scale1(m[1], y_from, y_to); |
| } |
| |
| static void m_rotate(float m[2][3], int quarter_turns) |
| { |
| if (quarter_turns & 2) |
| m_scale(m, 1, -1, 1, -1); |
| if (quarter_turns & 1) { |
| int q; |
| q = m[0][0]; m[0][0] = -m[1][0]; m[1][0] = q; |
| q = m[0][1]; m[0][1] = -m[1][1]; m[1][1] = q; |
| q = m[0][2]; m[0][2] = -m[1][2]; m[1][2] = q; |
| } |
| } |
| |
| static inline int m_round(float x) |
| { |
| /* int truncates towards 0 */ |
| return (int) (x < 0 ? x - 0.5 : x + 0.5); |
| } |
| |
| /* |
| * assuming xpy (xratio:yratio) original pixel ratio, calculate the adjusted width |
| * and height for a screen of xres/yres and physical size of width/height. |
| * The adjusted size is the largest that fits into the screen. |
| */ |
| static void get_max_dimensions(__u32 orig_xres, __u32 orig_yres, |
| float xpy, |
| __u32 scr_xres, __u32 scr_yres, |
| __u32 scr_width, __u32 scr_height, |
| __u32 *adj_xres, __u32 *adj_yres) |
| { |
| /* assume full screen (largest size)*/ |
| *adj_xres = scr_xres; |
| *adj_yres = scr_yres; |
| |
| /* assume 1:1 pixel ratios if none supplied */ |
| if (!scr_width || !scr_height) { |
| scr_width = scr_xres; |
| scr_height = scr_yres; |
| } |
| |
| /* trim to keep aspect ratio */ |
| float x_factor = orig_xres * xpy * scr_height; |
| float y_factor = orig_yres * scr_width; |
| |
| /* allow for tolerance so we avoid scaling if framebuffer is standard size */ |
| if (x_factor < y_factor * (1.f - ASPECT_RATIO_TOLERANCE)) |
| *adj_xres = (__u32) (x_factor * *adj_xres / y_factor + 0.5); |
| else if (x_factor * (1.f - ASPECT_RATIO_TOLERANCE) > y_factor) |
| *adj_yres = (__u32) (y_factor * *adj_yres / x_factor + 0.5); |
| } |
| |
| static void set_ext_matrix(omap4_hwc_ext_t *ext, struct hwc_rect region) |
| { |
| int orig_w = WIDTH(region); |
| int orig_h = HEIGHT(region); |
| float xpy = ext->lcd_xpy; |
| |
| /* reorientation matrix is: |
| m = (center-from-target-center) * (scale-to-target) * (mirror) * (rotate) * (center-to-original-center) */ |
| |
| memcpy(ext->m, m_unit, sizeof(m_unit)); |
| m_translate(ext->m, -(orig_w >> 1) - region.left, -(orig_h >> 1) - region.top); |
| m_rotate(ext->m, ext->current.rotation); |
| if (ext->current.hflip) |
| m_scale(ext->m, 1, -1, 1, 1); |
| |
| if (ext->current.rotation & 1) { |
| swap(orig_w, orig_h); |
| xpy = 1. / xpy; |
| } |
| |
| /* get target size */ |
| __u32 adj_xres, adj_yres; |
| get_max_dimensions(orig_w, orig_h, xpy, |
| ext->xres, ext->yres, ext->width, ext->height, |
| &adj_xres, &adj_yres); |
| |
| m_scale(ext->m, orig_w, adj_xres, orig_h, adj_yres); |
| m_translate(ext->m, ext->xres >> 1, ext->yres >> 1); |
| } |
| |
| static int |
| crop_to_rect(struct dss2_ovl_cfg *cfg, struct hwc_rect vis_rect) |
| { |
| struct { |
| int xy[2]; |
| int wh[2]; |
| } crop, win; |
| struct { |
| int lt[2]; |
| int rb[2]; |
| } vis; |
| win.xy[0] = cfg->win.x; win.xy[1] = cfg->win.y; |
| win.wh[0] = cfg->win.w; win.wh[1] = cfg->win.h; |
| crop.xy[0] = cfg->crop.x; crop.xy[1] = cfg->crop.y; |
| crop.wh[0] = cfg->crop.w; crop.wh[1] = cfg->crop.h; |
| vis.lt[0] = vis_rect.left; vis.lt[1] = vis_rect.top; |
| vis.rb[0] = vis_rect.right; vis.rb[1] = vis_rect.bottom; |
| |
| int c, swap = cfg->rotation & 1; |
| |
| /* align crop window with display coordinates */ |
| if (swap) |
| crop.xy[1] -= (crop.wh[1] = -crop.wh[1]); |
| if (cfg->rotation & 2) |
| crop.xy[!swap] -= (crop.wh[!swap] = -crop.wh[!swap]); |
| if ((!cfg->mirror) ^ !(cfg->rotation & 2)) |
| crop.xy[swap] -= (crop.wh[swap] = -crop.wh[swap]); |
| |
| for (c = 0; c < 2; c++) { |
| /* see if complete buffer is outside the vis or it is |
| fully cropped or scaled to 0 */ |
| if (win.wh[c] <= 0 || vis.rb[c] <= vis.lt[c] || |
| win.xy[c] + win.wh[c] <= vis.lt[c] || |
| win.xy[c] >= vis.rb[c] || |
| !crop.wh[c ^ swap]) |
| return -ENOENT; |
| |
| /* crop left/top */ |
| if (win.xy[c] < vis.lt[c]) { |
| /* correction term */ |
| int a = (vis.lt[c] - win.xy[c]) * crop.wh[c ^ swap] / win.wh[c]; |
| crop.xy[c ^ swap] += a; |
| crop.wh[c ^ swap] -= a; |
| win.wh[c] -= vis.lt[c] - win.xy[c]; |
| win.xy[c] = vis.lt[c]; |
| } |
| /* crop right/bottom */ |
| if (win.xy[c] + win.wh[c] > vis.rb[c]) { |
| crop.wh[c ^ swap] = crop.wh[c ^ swap] * (vis.rb[c] - win.xy[c]) / win.wh[c]; |
| win.wh[c] = vis.rb[c] - win.xy[c]; |
| } |
| |
| if (!crop.wh[c ^ swap] || !win.wh[c]) |
| return -ENOENT; |
| } |
| |
| /* realign crop window to buffer coordinates */ |
| if (cfg->rotation & 2) |
| crop.xy[!swap] -= (crop.wh[!swap] = -crop.wh[!swap]); |
| if ((!cfg->mirror) ^ !(cfg->rotation & 2)) |
| crop.xy[swap] -= (crop.wh[swap] = -crop.wh[swap]); |
| if (swap) |
| crop.xy[1] -= (crop.wh[1] = -crop.wh[1]); |
| |
| cfg->win.x = win.xy[0]; cfg->win.y = win.xy[1]; |
| cfg->win.w = win.wh[0]; cfg->win.h = win.wh[1]; |
| cfg->crop.x = crop.xy[0]; cfg->crop.y = crop.xy[1]; |
| cfg->crop.w = crop.wh[0]; cfg->crop.h = crop.wh[1]; |
| |
| return 0; |
| } |
| |
| static void |
| omap4_hwc_adjust_ext_layer(omap4_hwc_ext_t *ext, struct dss2_ovl_info *ovl) |
| { |
| struct dss2_ovl_cfg *oc = &ovl->cfg; |
| float x, y, w, h; |
| |
| /* crop to clone region if mirroring */ |
| if (!ext->current.docking && |
| crop_to_rect(&ovl->cfg, ext->mirror_region) != 0) { |
| ovl->cfg.enabled = 0; |
| return; |
| } |
| |
| /* display position */ |
| x = ext->m[0][0] * oc->win.x + ext->m[0][1] * oc->win.y + ext->m[0][2]; |
| y = ext->m[1][0] * oc->win.x + ext->m[1][1] * oc->win.y + ext->m[1][2]; |
| w = ext->m[0][0] * oc->win.w + ext->m[0][1] * oc->win.h; |
| h = ext->m[1][0] * oc->win.w + ext->m[1][1] * oc->win.h; |
| oc->win.x = m_round(w > 0 ? x : x + w); |
| oc->win.y = m_round(h > 0 ? y : y + h); |
| oc->win.w = m_round(w > 0 ? w : -w); |
| oc->win.h = m_round(h > 0 ? h : -h); |
| |
| /* combining transformations: F^a*R^b*F^i*R^j = F^(a+b)*R^(j+b*(-1)^i), because F*R = R^(-1)*F */ |
| oc->rotation += (oc->mirror ? -1 : 1) * ext->current.rotation; |
| oc->rotation &= 3; |
| if (ext->current.hflip) |
| oc->mirror = !oc->mirror; |
| } |
| |
| static struct dsscomp_dispc_limitations { |
| __u8 max_xdecim_2d; |
| __u8 max_ydecim_2d; |
| __u8 max_xdecim_1d; |
| __u8 max_ydecim_1d; |
| __u32 fclk; |
| __u8 max_downscale; |
| __u8 min_width; |
| __u16 integer_scale_ratio_limit; |
| __u16 max_width; |
| __u16 max_height; |
| } limits = { |
| .max_xdecim_1d = 16, |
| .max_xdecim_2d = 16, |
| .max_ydecim_1d = 16, |
| .max_ydecim_2d = 2, |
| .fclk = 170666666, |
| .max_downscale = 4, |
| .min_width = 2, |
| .integer_scale_ratio_limit = 2048, |
| .max_width = 2048, |
| .max_height = 2048, |
| }; |
| |
| static int omap4_hwc_can_scale(__u32 src_w, __u32 src_h, __u32 dst_w, __u32 dst_h, int is_2d, |
| struct dsscomp_display_info *dis, struct dsscomp_dispc_limitations *limits, |
| __u32 pclk) |
| { |
| __u32 fclk = limits->fclk / 1000; |
| __u32 min_src_w = DIV_ROUND_UP(src_w, is_2d ? limits->max_xdecim_2d : limits->max_xdecim_1d); |
| __u32 min_src_h = DIV_ROUND_UP(src_h, is_2d ? limits->max_ydecim_2d : limits->max_ydecim_1d); |
| |
| /* ERRATAs */ |
| /* cannot render 1-width layers on DSI video mode panels - we just disallow all 1-width LCD layers */ |
| if (dis->channel != OMAP_DSS_CHANNEL_DIGIT && dst_w < limits->min_width) |
| return 0; |
| |
| /* NOTE: no support for checking YUV422 layers that are tricky to scale */ |
| |
| /* FIXME: limit vertical downscale well below theoretical limit as we saw display artifacts */ |
| if (dst_h < src_h / 4) |
| return 0; |
| |
| /* max downscale */ |
| if (dst_h * limits->max_downscale < min_src_h) |
| return 0; |
| |
| /* for manual panels pclk is 0, and there are no pclk based scaling limits */ |
| if (!pclk) |
| return !(dst_w * limits->max_downscale < min_src_w); |
| |
| /* :HACK: limit horizontal downscale well below theoretical limit as we saw display artifacts */ |
| if (dst_w * 4 < src_w) |
| return 0; |
| |
| /* max horizontal downscale is 4, or the fclk/pixclk */ |
| if (fclk > pclk * limits->max_downscale) |
| fclk = pclk * limits->max_downscale; |
| /* for small parts, we need to use integer fclk/pixclk */ |
| if (src_w < limits->integer_scale_ratio_limit) |
| fclk = fclk / pclk * pclk; |
| if ((__u32) dst_w * fclk < min_src_w * pclk) |
| return 0; |
| |
| return 1; |
| } |
| |
| static int omap4_hwc_can_scale_layer(omap4_hwc_device_t *hwc_dev, hwc_layer_1_t *layer, IMG_native_handle_t *handle) |
| { |
| int src_w = WIDTH(layer->sourceCrop); |
| int src_h = HEIGHT(layer->sourceCrop); |
| int dst_w = WIDTH(layer->displayFrame); |
| int dst_h = HEIGHT(layer->displayFrame); |
| |
| /* account for 90-degree rotation */ |
| if (layer->transform & HWC_TRANSFORM_ROT_90) |
| swap(src_w, src_h); |
| |
| /* NOTE: layers should be able to be scaled externally since |
| framebuffer is able to be scaled on selected external resolution */ |
| return omap4_hwc_can_scale(src_w, src_h, dst_w, dst_h, is_NV12(handle), &hwc_dev->fb_dis, &limits, |
| hwc_dev->fb_dis.timings.pixel_clock); |
| } |
| |
| static int omap4_hwc_is_valid_layer(omap4_hwc_device_t *hwc_dev, |
| hwc_layer_1_t *layer, |
| IMG_native_handle_t *handle) |
| { |
| /* Skip layers are handled by SF */ |
| if ((layer->flags & HWC_SKIP_LAYER) || !handle) |
| return 0; |
| |
| if (!omap4_hwc_is_valid_format(handle->iFormat)) |
| return 0; |
| |
| /* 1D buffers: no transform, must fit in TILER slot */ |
| if (!is_NV12(handle)) { |
| if (layer->transform) |
| return 0; |
| if (mem1d(handle) > MAX_TILER_SLOT) |
| return 0; |
| } |
| |
| return omap4_hwc_can_scale_layer(hwc_dev, layer, handle); |
| } |
| |
| static __u32 add_scaling_score(__u32 score, |
| __u32 xres, __u32 yres, __u32 refresh, |
| __u32 ext_xres, __u32 ext_yres, |
| __u32 mode_xres, __u32 mode_yres, __u32 mode_refresh) |
| { |
| __u32 area = xres * yres; |
| __u32 ext_area = ext_xres * ext_yres; |
| __u32 mode_area = mode_xres * mode_yres; |
| |
| /* prefer to upscale (1% tolerance) [0..1] (insert after 1st bit) */ |
| int upscale = (ext_xres >= xres * 99 / 100 && ext_yres >= yres * 99 / 100); |
| score = (((score & ~1) | upscale) << 1) | (score & 1); |
| |
| /* pick minimum scaling [0..16] */ |
| if (ext_area > area) |
| score = (score << 5) | (16 * area / ext_area); |
| else |
| score = (score << 5) | (16 * ext_area / area); |
| |
| /* pick smallest leftover area [0..16] */ |
| score = (score << 5) | ((16 * ext_area + (mode_area >> 1)) / mode_area); |
| |
| /* adjust mode refresh rate */ |
| mode_refresh += mode_refresh % 6 == 5; |
| |
| /* prefer same or higher frame rate */ |
| upscale = (mode_refresh >= refresh); |
| score = (score << 1) | upscale; |
| |
| /* pick closest frame rate */ |
| if (mode_refresh > refresh) |
| score = (score << 8) | (240 * refresh / mode_refresh); |
| else |
| score = (score << 8) | (240 * mode_refresh / refresh); |
| |
| return score; |
| } |
| |
| static int omap4_hwc_set_best_hdmi_mode(omap4_hwc_device_t *hwc_dev, __u32 xres, __u32 yres, |
| float xpy) |
| { |
| struct _qdis { |
| struct dsscomp_display_info dis; |
| struct dsscomp_videomode modedb[32]; |
| } d = { .dis = { .ix = 1 } }; |
| omap4_hwc_ext_t *ext = &hwc_dev->ext; |
| |
| d.dis.modedb_len = sizeof(d.modedb) / sizeof(*d.modedb); |
| int ret = ioctl(hwc_dev->dsscomp_fd, DSSCIOC_QUERY_DISPLAY, &d); |
| if (ret) |
| return ret; |
| |
| if (d.dis.timings.x_res * d.dis.timings.y_res == 0 || |
| xres * yres == 0) |
| return -EINVAL; |
| |
| __u32 i, best = ~0, best_score = 0; |
| ext->width = d.dis.width_in_mm; |
| ext->height = d.dis.height_in_mm; |
| ext->xres = d.dis.timings.x_res; |
| ext->yres = d.dis.timings.y_res; |
| |
| /* use VGA external resolution as default */ |
| if (!ext->xres || !ext->yres) { |
| ext->xres = 640; |
| ext->yres = 480; |
| } |
| |
| __u32 ext_fb_xres, ext_fb_yres; |
| for (i = 0; i < d.dis.modedb_len; i++) { |
| __u32 score = 0; |
| __u32 mode_xres = d.modedb[i].xres; |
| __u32 mode_yres = d.modedb[i].yres; |
| __u32 ext_width = d.dis.width_in_mm; |
| __u32 ext_height = d.dis.height_in_mm; |
| |
| if (d.modedb[i].flag & FB_FLAG_RATIO_4_3) { |
| ext_width = 4; |
| ext_height = 3; |
| } else if (d.modedb[i].flag & FB_FLAG_RATIO_16_9) { |
| ext_width = 16; |
| ext_height = 9; |
| } |
| |
| if (!mode_xres || !mode_yres) |
| continue; |
| |
| get_max_dimensions(xres, yres, xpy, mode_xres, mode_yres, |
| ext_width, ext_height, &ext_fb_xres, &ext_fb_yres); |
| |
| /* we need to ensure that even TILER2D buffers can be scaled */ |
| if (!d.modedb[i].pixclock || |
| d.modedb[i].vmode || |
| !omap4_hwc_can_scale(xres, yres, ext_fb_xres, ext_fb_yres, |
| 1, &d.dis, &limits, |
| 1000000000 / d.modedb[i].pixclock)) |
| continue; |
| |
| /* prefer CEA modes */ |
| if (d.modedb[i].flag & (FB_FLAG_RATIO_4_3 | FB_FLAG_RATIO_16_9)) |
| score = 1; |
| |
| /* prefer the same mode as we use for mirroring to avoid mode change */ |
| score = (score << 1) | (i == ~ext->mirror_mode && ext->avoid_mode_change); |
| |
| score = add_scaling_score(score, xres, yres, 60, ext_fb_xres, ext_fb_yres, |
| mode_xres, mode_yres, d.modedb[i].refresh ? : 1); |
| |
| ALOGD("#%d: %dx%d %dHz", i, mode_xres, mode_yres, d.modedb[i].refresh); |
| if (debug) |
| ALOGD(" score=0x%x adj.res=%dx%d", score, ext_fb_xres, ext_fb_yres); |
| if (best_score < score) { |
| ext->width = ext_width; |
| ext->height = ext_height; |
| ext->xres = mode_xres; |
| ext->yres = mode_yres; |
| best = i; |
| best_score = score; |
| } |
| } |
| if (~best) { |
| struct dsscomp_setup_display_data sdis = { .ix = 1, }; |
| sdis.mode = d.dis.modedb[best]; |
| ALOGD("picking #%d", best); |
| /* only reconfigure on change */ |
| if (ext->last_mode != ~best) |
| ioctl(hwc_dev->dsscomp_fd, DSSCIOC_SETUP_DISPLAY, &sdis); |
| ext->last_mode = ~best; |
| } else { |
| __u32 ext_width = d.dis.width_in_mm; |
| __u32 ext_height = d.dis.height_in_mm; |
| __u32 ext_fb_xres, ext_fb_yres; |
| |
| get_max_dimensions(xres, yres, xpy, d.dis.timings.x_res, d.dis.timings.y_res, |
| ext_width, ext_height, &ext_fb_xres, &ext_fb_yres); |
| if (!d.dis.timings.pixel_clock || |
| d.dis.mgr.interlaced || |
| !omap4_hwc_can_scale(xres, yres, ext_fb_xres, ext_fb_yres, |
| 1, &d.dis, &limits, |
| d.dis.timings.pixel_clock)) { |
| ALOGW("DSS scaler cannot support HDMI cloning"); |
| return -1; |
| } |
| } |
| ext->last_xres_used = xres; |
| ext->last_yres_used = yres; |
| ext->last_xpy = xpy; |
| if (d.dis.channel == OMAP_DSS_CHANNEL_DIGIT) |
| ext->on_tv = 1; |
| return 0; |
| } |
| |
| struct counts { |
| unsigned int possible_overlay_layers; |
| unsigned int composited_layers; |
| unsigned int scaled_layers; |
| unsigned int RGB; |
| unsigned int BGR; |
| unsigned int NV12; |
| unsigned int dockable; |
| unsigned int protected; |
| |
| unsigned int max_hw_overlays; |
| unsigned int max_scaling_overlays; |
| unsigned int mem; |
| }; |
| |
| static void gather_layer_statistics(omap4_hwc_device_t *hwc_dev, struct counts *num, hwc_display_contents_1_t *list) |
| { |
| unsigned int i; |
| |
| /* Figure out how many layers we can support via DSS */ |
| for (i = 0; list && i < list->numHwLayers; i++) { |
| hwc_layer_1_t *layer = &list->hwLayers[i]; |
| IMG_native_handle_t *handle = (IMG_native_handle_t *)layer->handle; |
| |
| layer->compositionType = HWC_FRAMEBUFFER; |
| |
| if (omap4_hwc_is_valid_layer(hwc_dev, layer, handle)) { |
| num->possible_overlay_layers++; |
| |
| /* NV12 layers can only be rendered on scaling overlays */ |
| if (scaled(layer) || is_NV12(handle)) |
| num->scaled_layers++; |
| |
| if (is_BGR(handle)) |
| num->BGR++; |
| else if (is_RGB(handle)) |
| num->RGB++; |
| else if (is_NV12(handle)) |
| num->NV12++; |
| |
| if (dockable(layer)) |
| num->dockable++; |
| |
| if (is_protected(layer)) |
| num->protected++; |
| |
| num->mem += mem1d(handle); |
| } |
| } |
| } |
| |
| static void decide_supported_cloning(omap4_hwc_device_t *hwc_dev, struct counts *num) |
| { |
| omap4_hwc_ext_t *ext = &hwc_dev->ext; |
| int nonscaling_ovls = NUM_NONSCALING_OVERLAYS; |
| num->max_hw_overlays = MAX_HW_OVERLAYS; |
| |
| /* |
| * We cannot atomically switch overlays from one display to another. First, they |
| * have to be disabled, and the disabling has to take effect on the current display. |
| * We keep track of the available number of overlays here. |
| */ |
| if (ext->dock.enabled && !(ext->mirror.enabled && !(num->dockable || ext->force_dock))) { |
| /* some overlays may already be used by the external display, so we account for this */ |
| |
| /* reserve just a video pipeline for HDMI if docking */ |
| hwc_dev->ext_ovls = (num->dockable || ext->force_dock) ? 1 : 0; |
| num->max_hw_overlays -= max(hwc_dev->ext_ovls, hwc_dev->last_ext_ovls); |
| |
| /* use mirroring transform if we are auto-switching to docking mode while mirroring*/ |
| if (ext->mirror.enabled) { |
| ext->current = ext->mirror; |
| ext->current.docking = 1; |
| } else { |
| ext->current = ext->dock; |
| } |
| } else if (ext->mirror.enabled) { |
| /* |
| * otherwise, manage just from half the pipelines. NOTE: there is |
| * no danger of having used too many overlays for external display here. |
| */ |
| num->max_hw_overlays >>= 1; |
| nonscaling_ovls >>= 1; |
| hwc_dev->ext_ovls = MAX_HW_OVERLAYS - num->max_hw_overlays; |
| ext->current = ext->mirror; |
| } else { |
| num->max_hw_overlays -= hwc_dev->last_ext_ovls; |
| hwc_dev->ext_ovls = 0; |
| ext->current.enabled = 0; |
| } |
| |
| /* |
| * :TRICKY: We may not have enough overlays on the external display. We "reserve" them |
| * here to figure out if mirroring is supported, but may not do mirroring for the first |
| * frame while the overlays required for it are cleared. |
| */ |
| hwc_dev->ext_ovls_wanted = hwc_dev->ext_ovls; |
| hwc_dev->ext_ovls = min(MAX_HW_OVERLAYS - hwc_dev->last_int_ovls, hwc_dev->ext_ovls); |
| |
| /* if mirroring, we are limited by both internal and external overlays. However, |
| ext_ovls is always <= MAX_HW_OVERLAYS / 2 <= max_hw_overlays */ |
| if (hwc_dev->ext_ovls && ext->current.enabled && !ext->current.docking) |
| num->max_hw_overlays = hwc_dev->ext_ovls; |
| |
| num->max_scaling_overlays = num->max_hw_overlays - nonscaling_ovls; |
| } |
| |
| static int can_dss_render_all(omap4_hwc_device_t *hwc_dev, struct counts *num) |
| { |
| omap4_hwc_ext_t *ext = &hwc_dev->ext; |
| int on_tv = ext->on_tv && ext->current.enabled; |
| int tform = ext->current.enabled && (ext->current.rotation || ext->current.hflip); |
| |
| return !hwc_dev->force_sgx && |
| /* must have at least one layer if using composition bypass to get sync object */ |
| num->possible_overlay_layers && |
| num->possible_overlay_layers <= num->max_hw_overlays && |
| num->possible_overlay_layers == num->composited_layers && |
| num->scaled_layers <= num->max_scaling_overlays && |
| num->NV12 <= num->max_scaling_overlays && |
| /* fits into TILER slot */ |
| num->mem <= MAX_TILER_SLOT && |
| /* we cannot clone non-NV12 transformed layers */ |
| (!tform || num->NV12 == num->possible_overlay_layers) && |
| /* HDMI cannot display BGR */ |
| (num->BGR == 0 || (num->RGB == 0 && !on_tv) || !hwc_dev->flags_rgb_order); |
| } |
| |
| static inline int can_dss_render_layer(omap4_hwc_device_t *hwc_dev, |
| hwc_layer_1_t *layer) |
| { |
| IMG_native_handle_t *handle = (IMG_native_handle_t *)layer->handle; |
| |
| omap4_hwc_ext_t *ext = &hwc_dev->ext; |
| int on_tv = ext->on_tv && ext->current.enabled; |
| int tform = ext->current.enabled && (ext->current.rotation || ext->current.hflip); |
| |
| return omap4_hwc_is_valid_layer(hwc_dev, layer, handle) && |
| /* cannot rotate non-NV12 layers on external display */ |
| (!tform || is_NV12(handle)) && |
| /* skip non-NV12 layers if also using SGX (if nv12_only flag is set) */ |
| (!hwc_dev->flags_nv12_only || (!hwc_dev->use_sgx || is_NV12(handle))) && |
| /* make sure RGB ordering is consistent (if rgb_order flag is set) */ |
| (!(hwc_dev->swap_rb ? is_RGB(handle) : is_BGR(handle)) || |
| !hwc_dev->flags_rgb_order) && |
| /* TV can only render RGB */ |
| !(on_tv && is_BGR(handle)); |
| } |
| |
| static inline int display_area(struct dss2_ovl_info *o) |
| { |
| return o->cfg.win.w * o->cfg.win.h; |
| } |
| |
| static int clone_layer(omap4_hwc_device_t *hwc_dev, int ix) { |
| struct dsscomp_setup_dispc_data *dsscomp = &hwc_dev->dsscomp_data; |
| omap4_hwc_ext_t *ext = &hwc_dev->ext; |
| int ext_ovl_ix = dsscomp->num_ovls - hwc_dev->post2_layers; |
| struct dss2_ovl_info *o = &dsscomp->ovls[dsscomp->num_ovls]; |
| |
| if (dsscomp->num_ovls >= MAX_HW_OVERLAYS) { |
| ALOGE("**** cannot clone layer #%d. using all %d overlays.", ix, dsscomp->num_ovls); |
| return -EBUSY; |
| } |
| |
| memcpy(o, dsscomp->ovls + ix, sizeof(*o)); |
| |
| /* reserve overlays at end for other display */ |
| o->cfg.ix = MAX_HW_OVERLAYS - 1 - ext_ovl_ix; |
| o->cfg.mgr_ix = 1; |
| o->addressing = OMAP_DSS_BUFADDR_OVL_IX; |
| o->ba = ix; |
| |
| /* use distinct z values (to simplify z-order checking) */ |
| o->cfg.zorder += hwc_dev->post2_layers; |
| |
| omap4_hwc_adjust_ext_layer(&hwc_dev->ext, o); |
| dsscomp->num_ovls++; |
| return 0; |
| } |
| |
| static int clone_external_layer(omap4_hwc_device_t *hwc_dev, int ix) { |
| struct dsscomp_setup_dispc_data *dsscomp = &hwc_dev->dsscomp_data; |
| omap4_hwc_ext_t *ext = &hwc_dev->ext; |
| |
| /* mirror only 1 external layer */ |
| struct dss2_ovl_info *o = &dsscomp->ovls[ix]; |
| |
| /* full screen video after transformation */ |
| __u32 xres = o->cfg.crop.w, yres = o->cfg.crop.h; |
| if ((ext->current.rotation + o->cfg.rotation) & 1) |
| swap(xres, yres); |
| float xpy = ext->lcd_xpy * o->cfg.win.w / o->cfg.win.h; |
| if (o->cfg.rotation & 1) |
| xpy = o->cfg.crop.h / xpy / o->cfg.crop.w; |
| else |
| xpy = o->cfg.crop.h * xpy / o->cfg.crop.w; |
| if (ext->current.rotation & 1) |
| xpy = 1. / xpy; |
| |
| /* adjust hdmi mode based on resolution */ |
| if (xres != ext->last_xres_used || |
| yres != ext->last_yres_used || |
| xpy < ext->last_xpy * (1.f - ASPECT_RATIO_TOLERANCE) || |
| xpy * (1.f - ASPECT_RATIO_TOLERANCE) > ext->last_xpy) { |
| ALOGD("set up HDMI for %d*%d\n", xres, yres); |
| if (omap4_hwc_set_best_hdmi_mode(hwc_dev, xres, yres, xpy)) { |
| ext->current.enabled = 0; |
| return -ENODEV; |
| } |
| } |
| |
| struct hwc_rect region = { |
| .left = o->cfg.win.x, .top = o->cfg.win.y, |
| .right = o->cfg.win.x + o->cfg.win.w, |
| .bottom = o->cfg.win.y + o->cfg.win.h |
| }; |
| set_ext_matrix(&hwc_dev->ext, region); |
| |
| return clone_layer(hwc_dev, ix); |
| } |
| |
| static int setup_mirroring(omap4_hwc_device_t *hwc_dev) |
| { |
| omap4_hwc_ext_t *ext = &hwc_dev->ext; |
| |
| __u32 xres = WIDTH(ext->mirror_region); |
| __u32 yres = HEIGHT(ext->mirror_region); |
| if (ext->current.rotation & 1) |
| swap(xres, yres); |
| if (omap4_hwc_set_best_hdmi_mode(hwc_dev, xres, yres, ext->lcd_xpy)) |
| return -ENODEV; |
| set_ext_matrix(ext, ext->mirror_region); |
| return 0; |
| } |
| |
| /* |
| * We're using "implicit" synchronization, so make sure we aren't passing any |
| * sync object descriptors around. |
| */ |
| static void check_sync_fds(size_t numDisplays, hwc_display_contents_1_t** displays) |
| { |
| //ALOGD("checking sync FDs"); |
| unsigned int i, j; |
| for (i = 0; i < numDisplays; i++) { |
| hwc_display_contents_1_t* list = displays[i]; |
| if (list->retireFenceFd >= 0) { |
| ALOGW("retireFenceFd[%u] was %d", i, list->retireFenceFd); |
| list->retireFenceFd = -1; |
| } |
| |
| for (j = 0; j < list->numHwLayers; j++) { |
| hwc_layer_1_t* layer = &list->hwLayers[j]; |
| if (layer->acquireFenceFd >= 0) { |
| ALOGW("acquireFenceFd[%u][%u] was %d, closing", i, j, layer->acquireFenceFd); |
| close(layer->acquireFenceFd); |
| layer->acquireFenceFd = -1; |
| } |
| if (layer->releaseFenceFd >= 0) { |
| ALOGW("releaseFenceFd[%u][%u] was %d", i, j, layer->releaseFenceFd); |
| layer->releaseFenceFd = -1; |
| } |
| } |
| } |
| } |
| |
| static int omap4_hwc_prepare(struct hwc_composer_device_1 *dev, size_t numDisplays, |
| hwc_display_contents_1_t** displays) |
| { |
| if (!numDisplays || displays == NULL) { |
| return 0; |
| } |
| |
| hwc_display_contents_1_t* list = displays[0]; // ignore displays beyond the first |
| omap4_hwc_device_t *hwc_dev = (omap4_hwc_device_t *)dev; |
| struct dsscomp_setup_dispc_data *dsscomp = &hwc_dev->dsscomp_data; |
| struct counts num = { .composited_layers = list ? list->numHwLayers : 0 }; |
| unsigned int i, ix; |
| |
| pthread_mutex_lock(&hwc_dev->lock); |
| memset(dsscomp, 0x0, sizeof(*dsscomp)); |
| dsscomp->sync_id = sync_id++; |
| |
| gather_layer_statistics(hwc_dev, &num, list); |
| |
| decide_supported_cloning(hwc_dev, &num); |
| |
| /* Disable the forced SGX rendering if there is only one layer */ |
| if (hwc_dev->force_sgx && num.composited_layers <= 1) |
| hwc_dev->force_sgx = 0; |
| |
| /* phase 3 logic */ |
| if (can_dss_render_all(hwc_dev, &num)) { |
| /* All layers can be handled by the DSS -- don't use SGX for composition */ |
| hwc_dev->use_sgx = 0; |
| hwc_dev->swap_rb = num.BGR != 0; |
| } else { |
| /* Use SGX for composition plus first 3 layers that are DSS renderable */ |
| hwc_dev->use_sgx = 1; |
| hwc_dev->swap_rb = is_BGR_format(hwc_dev->fb_dev->base.format); |
| } |
| |
| /* setup pipes */ |
| dsscomp->num_ovls = hwc_dev->use_sgx; |
| int z = 0; |
| int fb_z = -1; |
| int scaled_gfx = 0; |
| int ix_docking = -1; |
| |
| /* set up if DSS layers */ |
| unsigned int mem_used = 0; |
| hwc_dev->ovls_blending = 0; |
| for (i = 0; list && i < list->numHwLayers; i++) { |
| hwc_layer_1_t *layer = &list->hwLayers[i]; |
| IMG_native_handle_t *handle = (IMG_native_handle_t *)layer->handle; |
| |
| if (dsscomp->num_ovls < num.max_hw_overlays && |
| can_dss_render_layer(hwc_dev, layer) && |
| (!hwc_dev->force_sgx || |
| /* render protected and dockable layers via DSS */ |
| is_protected(layer) || |
| (hwc_dev->ext.current.docking && hwc_dev->ext.current.enabled && dockable(layer))) && |
| mem_used + mem1d(handle) < MAX_TILER_SLOT && |
| /* can't have a transparent overlay in the middle of the framebuffer stack */ |
| !(is_BLENDED(layer) && fb_z >= 0)) { |
| |
| /* render via DSS overlay */ |
| mem_used += mem1d(handle); |
| layer->compositionType = HWC_OVERLAY; |
| |
| /* clear FB above all opaque layers if rendering via SGX */ |
| if (hwc_dev->use_sgx && !is_BLENDED(layer)) |
| layer->hints |= HWC_HINT_CLEAR_FB; |
| /* see if any of the (non-backmost) overlays are doing blending */ |
| else if (is_BLENDED(layer) && i > 0) |
| hwc_dev->ovls_blending = 1; |
| |
| hwc_dev->buffers[dsscomp->num_ovls] = layer->handle; |
| |
| omap4_hwc_setup_layer(hwc_dev, |
| &dsscomp->ovls[dsscomp->num_ovls], |
| layer, |
| z, |
| handle->iFormat, |
| handle->iWidth, |
| handle->iHeight); |
| |
| dsscomp->ovls[dsscomp->num_ovls].cfg.ix = dsscomp->num_ovls; |
| dsscomp->ovls[dsscomp->num_ovls].addressing = OMAP_DSS_BUFADDR_LAYER_IX; |
| dsscomp->ovls[dsscomp->num_ovls].ba = dsscomp->num_ovls; |
| |
| /* ensure GFX layer is never scaled */ |
| if (dsscomp->num_ovls == 0) { |
| scaled_gfx = scaled(layer) || is_NV12(handle); |
| } else if (scaled_gfx && !scaled(layer) && !is_NV12(handle)) { |
| /* swap GFX layer with this one */ |
| dsscomp->ovls[dsscomp->num_ovls].cfg.ix = 0; |
| dsscomp->ovls[0].cfg.ix = dsscomp->num_ovls; |
| scaled_gfx = 0; |
| } |
| |
| /* remember largest dockable layer */ |
| if (dockable(layer) && |
| (ix_docking < 0 || |
| display_area(&dsscomp->ovls[dsscomp->num_ovls]) > display_area(&dsscomp->ovls[ix_docking]))) |
| ix_docking = dsscomp->num_ovls; |
| |
| dsscomp->num_ovls++; |
| z++; |
| } else if (hwc_dev->use_sgx) { |
| if (fb_z < 0) { |
| /* NOTE: we are not handling transparent cutout for now */ |
| fb_z = z; |
| z++; |
| } else { |
| /* move fb z-order up (by lowering dss layers) */ |
| while (fb_z < z - 1) |
| dsscomp->ovls[1 + fb_z++].cfg.zorder--; |
| } |
| } |
| } |
| |
| /* if scaling GFX (e.g. only 1 scaled surface) use a VID pipe */ |
| if (scaled_gfx) |
| dsscomp->ovls[0].cfg.ix = dsscomp->num_ovls; |
| |
| if (hwc_dev->use_sgx) { |
| /* assign a z-layer for fb */ |
| if (fb_z < 0) { |
| if (num.composited_layers) |
| ALOGE("**** should have assigned z-layer for fb"); |
| fb_z = z++; |
| } |
| |
| hwc_dev->buffers[0] = NULL; |
| omap4_hwc_setup_layer_base(&dsscomp->ovls[0].cfg, fb_z, |
| hwc_dev->fb_dev->base.format, |
| 1, /* FB is always premultiplied */ |
| hwc_dev->fb_dev->base.width, |
| hwc_dev->fb_dev->base.height); |
| dsscomp->ovls[0].cfg.pre_mult_alpha = 1; |
| dsscomp->ovls[0].addressing = OMAP_DSS_BUFADDR_LAYER_IX; |
| dsscomp->ovls[0].ba = 0; |
| } |
| |
| /* mirror layers */ |
| hwc_dev->post2_layers = dsscomp->num_ovls; |
| |
| omap4_hwc_ext_t *ext = &hwc_dev->ext; |
| if (ext->current.enabled && hwc_dev->ext_ovls) { |
| if (ext->current.docking && ix_docking >= 0) { |
| if (clone_external_layer(hwc_dev, ix_docking) == 0) |
| dsscomp->ovls[dsscomp->num_ovls - 1].cfg.zorder = z++; |
| } else if (ext->current.docking && ix_docking < 0 && ext->force_dock) { |
| ix_docking = dsscomp->num_ovls; |
| struct dss2_ovl_info *oi = &dsscomp->ovls[ix_docking]; |
| omap4_hwc_setup_layer_base(&oi->cfg, 0, HAL_PIXEL_FORMAT_BGRA_8888, 1, |
| dock_image.width, dock_image.height); |
| oi->cfg.stride = dock_image.rowbytes; |
| if (clone_external_layer(hwc_dev, ix_docking) == 0) { |
| oi->addressing = OMAP_DSS_BUFADDR_FB; |
| oi->ba = 0; |
| z++; |
| } |
| } else if (!ext->current.docking) { |
| int res = 0; |
| |
| /* reset mode if we are coming from docking */ |
| if (ext->last.docking) |
| res = setup_mirroring(hwc_dev); |
| |
| /* mirror all layers */ |
| for (ix = 0; res == 0 && ix < hwc_dev->post2_layers; ix++) { |
| if (clone_layer(hwc_dev, ix)) |
| break; |
| z++; |
| } |
| } |
| } |
| ext->last = ext->current; |
| |
| if (z != dsscomp->num_ovls || dsscomp->num_ovls > MAX_HW_OVERLAYS) |
| ALOGE("**** used %d z-layers for %d overlays\n", z, dsscomp->num_ovls); |
| |
| /* verify all z-orders and overlay indices are distinct */ |
| for (i = z = ix = 0; i < dsscomp->num_ovls; i++) { |
| struct dss2_ovl_cfg *c = &dsscomp->ovls[i].cfg; |
| |
| if (z & (1 << c->zorder)) |
| ALOGE("**** used z-order #%d multiple times", c->zorder); |
| if (ix & (1 << c->ix)) |
| ALOGE("**** used ovl index #%d multiple times", c->ix); |
| z |= 1 << c->zorder; |
| ix |= 1 << c->ix; |
| } |
| dsscomp->mode = DSSCOMP_SETUP_DISPLAY; |
| dsscomp->mgrs[0].ix = 0; |
| dsscomp->mgrs[0].alpha_blending = 1; |
| dsscomp->mgrs[0].swap_rb = hwc_dev->swap_rb; |
| dsscomp->num_mgrs = 1; |
| |
| if (ext->current.enabled || hwc_dev->last_ext_ovls) { |
| dsscomp->mgrs[1] = dsscomp->mgrs[0]; |
| dsscomp->mgrs[1].ix = 1; |
| dsscomp->num_mgrs++; |
| hwc_dev->ext_ovls = dsscomp->num_ovls - hwc_dev->post2_layers; |
| } |
| |
| if (debug) { |
| ALOGD("prepare (%d) - %s (comp=%d, poss=%d/%d scaled, RGB=%d,BGR=%d,NV12=%d) (ext=%s%s%ddeg%s %dex/%dmx (last %dex,%din)\n", |
| dsscomp->sync_id, |
| hwc_dev->use_sgx ? "SGX+OVL" : "all-OVL", |
| num.composited_layers, |
| num.possible_overlay_layers, num.scaled_layers, |
| num.RGB, num.BGR, num.NV12, |
| ext->on_tv ? "tv+" : "", |
| ext->current.enabled ? ext->current.docking ? "dock+" : "mirror+" : "OFF+", |
| ext->current.rotation * 90, |
| ext->current.hflip ? "+hflip" : "", |
| hwc_dev->ext_ovls, num.max_hw_overlays, hwc_dev->last_ext_ovls, hwc_dev->last_int_ovls); |
| } |
| |
| pthread_mutex_unlock(&hwc_dev->lock); |
| return 0; |
| } |
| |
| static void omap4_hwc_reset_screen(omap4_hwc_device_t *hwc_dev) |
| { |
| static int first_set = 1; |
| int ret; |
| |
| if (first_set) { |
| first_set = 0; |
| struct dsscomp_setup_dispc_data d = { |
| .num_mgrs = 1, |
| }; |
| /* remove bootloader image from the screen as blank/unblank does not change the composition */ |
| ret = ioctl(hwc_dev->dsscomp_fd, DSSCIOC_SETUP_DISPC, &d); |
| if (ret) |
| ALOGW("failed to remove bootloader image"); |
| |
| /* blank and unblank fd to make sure display is properly programmed on boot. |
| * This is needed because the bootloader can not be trusted. |
| */ |
| ret = ioctl(hwc_dev->fb_fd, FBIOBLANK, FB_BLANK_POWERDOWN); |
| if (ret) |
| ALOGW("failed to blank display"); |
| |
| ret = ioctl(hwc_dev->fb_fd, FBIOBLANK, FB_BLANK_UNBLANK); |
| if (ret) |
| ALOGW("failed to blank display"); |
| } |
| } |
| |
| static int omap4_hwc_set(struct hwc_composer_device_1 *dev, |
| size_t numDisplays, hwc_display_contents_1_t** displays) |
| { |
| if (!numDisplays || displays == NULL) { |
| ALOGD("set: empty display list"); |
| return 0; |
| } |
| hwc_display_t dpy = NULL; |
| hwc_surface_t sur = NULL; |
| hwc_display_contents_1_t* list = displays[0]; // ignore displays beyond the first |
| if (list != NULL) { |
| dpy = list->dpy; |
| sur = list->sur; |
| } |
| omap4_hwc_device_t *hwc_dev = (omap4_hwc_device_t *)dev; |
| struct dsscomp_setup_dispc_data *dsscomp = &hwc_dev->dsscomp_data; |
| int err = 0; |
| int invalidate; |
| |
| pthread_mutex_lock(&hwc_dev->lock); |
| |
| omap4_hwc_reset_screen(hwc_dev); |
| |
| invalidate = hwc_dev->ext_ovls_wanted && !hwc_dev->ext_ovls; |
| |
| if (debug) |
| dump_set_info(hwc_dev, list); |
| |
| if (dpy && sur) { |
| // list can be NULL which means hwc is temporarily disabled. |
| // however, if dpy and sur are null it means we're turning the |
| // screen off. no shall not call eglSwapBuffers() in that case. |
| |
| if (hwc_dev->use_sgx) { |
| if (!eglSwapBuffers((EGLDisplay)dpy, (EGLSurface)sur)) { |
| ALOGE("eglSwapBuffers error"); |
| err = HWC_EGL_ERROR; |
| goto err_out; |
| } |
| } |
| |
| //dump_dsscomp(dsscomp); |
| |
| // signal the event thread that a post has happened |
| write(hwc_dev->pipe_fds[1], "s", 1); |
| if (hwc_dev->force_sgx > 0) |
| hwc_dev->force_sgx--; |
| |
| err = hwc_dev->fb_dev->Post2((framebuffer_device_t *)hwc_dev->fb_dev, |
| hwc_dev->buffers, |
| hwc_dev->post2_layers, |
| dsscomp, sizeof(*dsscomp)); |
| } |
| hwc_dev->last_ext_ovls = hwc_dev->ext_ovls; |
| hwc_dev->last_int_ovls = hwc_dev->post2_layers; |
| if (err) |
| ALOGE("Post2 error"); |
| |
| check_sync_fds(numDisplays, displays); |
| |
| err_out: |
| pthread_mutex_unlock(&hwc_dev->lock); |
| |
| if (invalidate) |
| hwc_dev->procs->invalidate(hwc_dev->procs); |
| |
| return err; |
| } |
| |
| static void omap4_hwc_dump(struct hwc_composer_device_1 *dev, char *buff, int buff_len) |
| { |
| omap4_hwc_device_t *hwc_dev = (omap4_hwc_device_t *)dev; |
| struct dsscomp_setup_dispc_data *dsscomp = &hwc_dev->dsscomp_data; |
| struct dump_buf log = { |
| .buf = buff, |
| .buf_len = buff_len, |
| }; |
| int i; |
| |
| dump_printf(&log, "omap4_hwc %d:\n", dsscomp->num_ovls); |
| dump_printf(&log, " idle timeout: %dms\n", hwc_dev->idle); |
| |
| for (i = 0; i < dsscomp->num_ovls; i++) { |
| struct dss2_ovl_cfg *cfg = &dsscomp->ovls[i].cfg; |
| |
| dump_printf(&log, " layer %d:\n", i); |
| dump_printf(&log, " enabled: %s\n", |
| cfg->enabled ? "true" : "false"); |
| dump_printf(&log, " buff: %p %dx%d stride: %d\n", |
| hwc_dev->buffers[i], cfg->width, cfg->height, cfg->stride); |
| dump_printf(&log, " src: (%d,%d) %dx%d\n", |
| cfg->crop.x, cfg->crop.y, cfg->crop.w, cfg->crop.h); |
| dump_printf(&log, " dst: (%d,%d) %dx%d\n", |
| cfg->win.x, cfg->win.y, cfg->win.w, cfg->win.h); |
| dump_printf(&log, " ix: %d\n", cfg->ix); |
| dump_printf(&log, " zorder: %d\n\n", cfg->zorder); |
| } |
| } |
| |
| static void free_png_image(omap4_hwc_device_t *hwc_dev, struct omap4_hwc_img *img) |
| { |
| memset(img, 0, sizeof(*img)); |
| } |
| |
| static int load_png_image(omap4_hwc_device_t *hwc_dev, char *path, struct omap4_hwc_img *img) |
| { |
| void *ptr = NULL; |
| png_bytepp row_pointers = NULL; |
| |
| FILE *fd = fopen(path, "rb"); |
| if (!fd) { |
| ALOGE("failed to open PNG file %s: (%d)", path, errno); |
| return -EINVAL; |
| } |
| |
| const int SIZE_PNG_HEADER = 8; |
| __u8 header[SIZE_PNG_HEADER]; |
| fread(header, 1, SIZE_PNG_HEADER, fd); |
| if (png_sig_cmp(header, 0, SIZE_PNG_HEADER)) { |
| ALOGE("%s is not a PNG file", path); |
| goto fail; |
| } |
| |
| png_structp png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING, NULL, NULL, NULL); |
| if (!png_ptr) |
| goto fail_alloc; |
| png_infop info_ptr = png_create_info_struct(png_ptr); |
| if (!info_ptr) |
| goto fail_alloc; |
| |
| if (setjmp(png_jmpbuf(png_ptr))) |
| goto fail_alloc; |
| |
| png_init_io(png_ptr, fd); |
| png_set_sig_bytes(png_ptr, SIZE_PNG_HEADER); |
| png_set_user_limits(png_ptr, limits.max_width, limits.max_height); |
| png_read_info(png_ptr, info_ptr); |
| |
| __u8 bit_depth = png_get_bit_depth(png_ptr, info_ptr); |
| __u32 width = png_get_image_width(png_ptr, info_ptr); |
| __u32 height = png_get_image_height(png_ptr, info_ptr); |
| __u8 color_type = png_get_color_type(png_ptr, info_ptr); |
| |
| switch (color_type) { |
| case PNG_COLOR_TYPE_PALETTE: |
| png_set_palette_to_rgb(png_ptr); |
| png_set_filler(png_ptr, 128, PNG_FILLER_AFTER); |
| break; |
| case PNG_COLOR_TYPE_GRAY: |
| if (bit_depth < 8) { |
| png_set_expand_gray_1_2_4_to_8(png_ptr); |
| if (png_get_valid(png_ptr, info_ptr, PNG_INFO_tRNS)) |
| png_set_tRNS_to_alpha(png_ptr); |
| } else { |
| png_set_filler(png_ptr, 128, PNG_FILLER_AFTER); |
| } |
| /* fall through */ |
| case PNG_COLOR_TYPE_GRAY_ALPHA: |
| png_set_gray_to_rgb(png_ptr); |
| break; |
| case PNG_COLOR_TYPE_RGB: |
| png_set_filler(png_ptr, 128, PNG_FILLER_AFTER); |
| /* fall through */ |
| case PNG_COLOR_TYPE_RGB_ALPHA: |
| png_set_bgr(png_ptr); |
| break; |
| default: |
| ALOGE("unsupported PNG color: %x", color_type); |
| goto fail_alloc; |
| } |
| |
| if (bit_depth == 16) |
| png_set_strip_16(png_ptr); |
| |
| const int bpp = 4; |
| img->size = ALIGN(width * height * bpp, 4096); |
| if (img->size > hwc_dev->img_mem_size) { |
| ALOGE("image does not fit into framebuffer area (%d > %d)", img->size, hwc_dev->img_mem_size); |
| goto fail_alloc; |
| } |
| img->ptr = hwc_dev->img_mem_ptr; |
| |
| row_pointers = calloc(height, sizeof(*row_pointers)); |
| if (!row_pointers) { |
| ALOGE("failed to allocate row pointers"); |
| goto fail_alloc; |
| } |
| __u32 i; |
| for (i = 0; i < height; i++) |
| row_pointers[i] = img->ptr + i * width * bpp; |
| png_set_rows(png_ptr, info_ptr, row_pointers); |
| png_read_update_info(png_ptr, info_ptr); |
| img->rowbytes = png_get_rowbytes(png_ptr, info_ptr); |
| |
| png_read_image(png_ptr, row_pointers); |
| png_read_end(png_ptr, NULL); |
| free(row_pointers); |
| png_destroy_read_struct(&png_ptr, &info_ptr, NULL); |
| fclose(fd); |
| img->width = width; |
| img->height = height; |
| return 0; |
| |
| fail_alloc: |
| free_png_image(hwc_dev, img); |
| free(row_pointers); |
| if (!png_ptr || !info_ptr) |
| ALOGE("failed to allocate PNG structures"); |
| png_destroy_read_struct(&png_ptr, &info_ptr, NULL); |
| fail: |
| fclose(fd); |
| return -EINVAL; |
| } |
| |
| |
| static int omap4_hwc_device_close(hw_device_t* device) |
| { |
| omap4_hwc_device_t *hwc_dev = (omap4_hwc_device_t *) device;; |
| |
| if (hwc_dev) { |
| if (hwc_dev->dsscomp_fd >= 0) |
| close(hwc_dev->dsscomp_fd); |
| if (hwc_dev->hdmi_fb_fd >= 0) |
| close(hwc_dev->hdmi_fb_fd); |
| if (hwc_dev->fb_fd >= 0) |
| close(hwc_dev->fb_fd); |
| /* pthread will get killed when parent process exits */ |
| pthread_mutex_destroy(&hwc_dev->lock); |
| free(hwc_dev); |
| } |
| |
| return 0; |
| } |
| |
| static int omap4_hwc_open_fb_hal(IMG_framebuffer_device_public_t **fb_dev) |
| { |
| const struct hw_module_t *psModule; |
| IMG_gralloc_module_public_t *psGrallocModule; |
| int err; |
| |
| err = hw_get_module(GRALLOC_HARDWARE_MODULE_ID, &psModule); |
| psGrallocModule = (IMG_gralloc_module_public_t *) psModule; |
| |
| if(err) |
| goto err_out; |
| |
| if (strcmp(psGrallocModule->base.common.author, "Imagination Technologies")) { |
| err = -EINVAL; |
| goto err_out; |
| } |
| |
| *fb_dev = psGrallocModule->psFrameBufferDevice; |
| |
| return 0; |
| |
| err_out: |
| ALOGE("Composer HAL failed to load compatible Graphics HAL"); |
| return err; |
| } |
| |
| static void handle_hotplug(omap4_hwc_device_t *hwc_dev) |
| { |
| omap4_hwc_ext_t *ext = &hwc_dev->ext; |
| __u8 state = ext->hdmi_state; |
| |
| pthread_mutex_lock(&hwc_dev->lock); |
| ext->dock.enabled = ext->mirror.enabled = 0; |
| if (state) { |
| /* check whether we can clone and/or dock */ |
| char value[PROPERTY_VALUE_MAX]; |
| property_get("persist.hwc.docking.enabled", value, "1"); |
| ext->dock.enabled = atoi(value) > 0; |
| property_get("persist.hwc.mirroring.enabled", value, "1"); |
| ext->mirror.enabled = atoi(value) > 0; |
| property_get("persist.hwc.avoid_mode_change", value, "1"); |
| ext->avoid_mode_change = atoi(value) > 0; |
| |
| /* get cloning transformation */ |
| property_get("persist.hwc.docking.transform", value, "0"); |
| ext->dock.rotation = atoi(value) & EXT_ROTATION; |
| ext->dock.hflip = (atoi(value) & EXT_HFLIP) > 0; |
| ext->dock.docking = 1; |
| property_get("persist.hwc.mirroring.transform", value, hwc_dev->fb_dev->base.height > hwc_dev->fb_dev->base.width ? "3" : "0"); |
| ext->mirror.rotation = atoi(value) & EXT_ROTATION; |
| ext->mirror.hflip = (atoi(value) & EXT_HFLIP) > 0; |
| ext->mirror.docking = 0; |
| |
| if (ext->force_dock) { |
| /* restrict to docking with no transform */ |
| ext->mirror.enabled = 0; |
| ext->dock.rotation = 0; |
| ext->dock.hflip = 0; |
| |
| if (!dock_image.rowbytes) { |
| property_get("persist.hwc.dock_image", value, "/vendor/res/images/dock/dock.png"); |
| load_png_image(hwc_dev, value, &dock_image); |
| } |
| } |
| |
| /* select best mode for mirroring */ |
| if (ext->mirror.enabled) { |
| ext->current = ext->mirror; |
| ext->mirror_mode = 0; |
| if (setup_mirroring(hwc_dev) == 0) { |
| ext->mirror_mode = ext->last_mode; |
| ioctl(hwc_dev->hdmi_fb_fd, FBIOBLANK, FB_BLANK_UNBLANK); |
| } else |
| ext->mirror.enabled = 0; |
| } |
| } else { |
| ext->last_mode = 0; |
| } |
| ALOGI("external display changed (state=%d, mirror={%s tform=%ddeg%s}, dock={%s tform=%ddeg%s%s}, tv=%d", state, |
| ext->mirror.enabled ? "enabled" : "disabled", |
| ext->mirror.rotation * 90, |
| ext->mirror.hflip ? "+hflip" : "", |
| ext->dock.enabled ? "enabled" : "disabled", |
| ext->dock.rotation * 90, |
| ext->dock.hflip ? "+hflip" : "", |
| ext->force_dock ? " forced" : "", |
| ext->on_tv); |
| |
| pthread_mutex_unlock(&hwc_dev->lock); |
| |
| /* hwc_dev->procs is set right after the device is opened, but there is |
| * still a race condition where a hotplug event might occur after the open |
| * but before the procs are registered. */ |
| if (hwc_dev->procs) |
| hwc_dev->procs->invalidate(hwc_dev->procs); |
| } |
| |
| static void handle_uevents(omap4_hwc_device_t *hwc_dev, const char *buff, int len) |
| { |
| int dock; |
| int hdmi; |
| int vsync; |
| int state = 0; |
| uint64_t timestamp = 0; |
| const char *s = buff; |
| |
| dock = !strcmp(s, "change@/devices/virtual/switch/dock"); |
| hdmi = !strcmp(s, "change@/devices/virtual/switch/hdmi"); |
| vsync = !strcmp(s, "change@/devices/platform/omapfb") || |
| !strcmp(s, "change@/devices/virtual/switch/omapfb-vsync"); |
| |
| if (!dock && !vsync && !hdmi) |
| return; |
| |
| s += strlen(s) + 1; |
| |
| while(*s) { |
| if (!strncmp(s, "SWITCH_STATE=", strlen("SWITCH_STATE="))) |
| state = atoi(s + strlen("SWITCH_STATE=")); |
| else if (!strncmp(s, "SWITCH_TIME=", strlen("SWITCH_TIME="))) |
| timestamp = strtoull(s + strlen("SWITCH_TIME="), NULL, 0); |
| else if (!strncmp(s, "VSYNC=", strlen("VSYNC="))) |
| timestamp = strtoull(s + strlen("VSYNC="), NULL, 0); |
| |
| s += strlen(s) + 1; |
| if (s - buff >= len) |
| break; |
| } |
| |
| if (vsync) { |
| if (hwc_dev->procs) |
| hwc_dev->procs->vsync(hwc_dev->procs, 0, timestamp); |
| } else { |
| if (dock) |
| hwc_dev->ext.force_dock = state == 1; |
| else |
| hwc_dev->ext.hdmi_state = state == 1; |
| handle_hotplug(hwc_dev); |
| } |
| } |
| |
| static void *omap4_hwc_hdmi_thread(void *data) |
| { |
| omap4_hwc_device_t *hwc_dev = data; |
| static char uevent_desc[4096]; |
| struct pollfd fds[2]; |
| int invalidate = 0; |
| int timeout; |
| int err; |
| |
| setpriority(PRIO_PROCESS, 0, HAL_PRIORITY_URGENT_DISPLAY); |
| |
| uevent_init(); |
| |
| fds[0].fd = uevent_get_fd(); |
| fds[0].events = POLLIN; |
| fds[1].fd = hwc_dev->pipe_fds[0]; |
| fds[1].events = POLLIN; |
| |
| timeout = hwc_dev->idle ? hwc_dev->idle : -1; |
| |
| memset(uevent_desc, 0, sizeof(uevent_desc)); |
| |
| do { |
| err = poll(fds, hwc_dev->idle ? 2 : 1, timeout); |
| |
| if (err == 0) { |
| if (hwc_dev->idle) { |
| if (hwc_dev->procs) { |
| pthread_mutex_lock(&hwc_dev->lock); |
| invalidate = !hwc_dev->force_sgx && hwc_dev->ovls_blending; |
| if (invalidate) { |
| hwc_dev->force_sgx = 2; |
| } |
| pthread_mutex_unlock(&hwc_dev->lock); |
| |
| if (invalidate) { |
| hwc_dev->procs->invalidate(hwc_dev->procs); |
| timeout = -1; |
| } |
| } |
| |
| continue; |
| } |
| } |
| |
| if (err == -1) { |
| if (errno != EINTR) |
| ALOGE("event error: %m"); |
| continue; |
| } |
| |
| if (hwc_dev->idle && fds[1].revents & POLLIN) { |
| char c; |
| read(hwc_dev->pipe_fds[0], &c, 1); |
| if (!hwc_dev->force_sgx) |
| timeout = hwc_dev->idle ? hwc_dev->idle : -1; |
| } |
| |
| if (fds[0].revents & POLLIN) { |
| /* keep last 2 zeroes to ensure double 0 termination */ |
| int len = uevent_next_event(uevent_desc, sizeof(uevent_desc) - 2); |
| handle_uevents(hwc_dev, uevent_desc, len); |
| } |
| } while (1); |
| |
| return NULL; |
| } |
| |
| static void omap4_hwc_registerProcs(struct hwc_composer_device_1* dev, |
| hwc_procs_t const* procs) |
| { |
| omap4_hwc_device_t *hwc_dev = (omap4_hwc_device_t *) dev; |
| |
| hwc_dev->procs = (typeof(hwc_dev->procs)) procs; |
| } |
| |
| static int omap4_hwc_query(struct hwc_composer_device_1* dev, |
| int what, int* value) |
| { |
| omap4_hwc_device_t *hwc_dev = (omap4_hwc_device_t *) dev; |
| |
| switch (what) { |
| case HWC_BACKGROUND_LAYER_SUPPORTED: |
| // we don't support the background layer yet |
| value[0] = 0; |
| break; |
| case HWC_VSYNC_PERIOD: |
| // vsync period in nanosecond |
| value[0] = 1000000000.0 / hwc_dev->fb_dev->base.fps; |
| break; |
| default: |
| // unsupported query |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int omap4_hwc_event_control(struct hwc_composer_device_1* dev, |
| int dpy, int event, int enabled) |
| { |
| omap4_hwc_device_t *hwc_dev = (omap4_hwc_device_t *) dev; |
| |
| switch (event) { |
| case HWC_EVENT_VSYNC: |
| { |
| int val = !!enabled; |
| int err; |
| |
| err = ioctl(hwc_dev->fb_fd, OMAPFB_ENABLEVSYNC, &val); |
| if (err < 0) |
| return -errno; |
| |
| return 0; |
| } |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int omap4_hwc_blank(struct hwc_composer_device_1 *dev, int dpy, int blank) |
| { |
| // We're using an older method of screen blanking based on |
| // early_suspend in the kernel. No need to do anything here. |
| return 0; |
| } |
| |
| static int omap4_hwc_device_open(const hw_module_t* module, const char* name, |
| hw_device_t** device) |
| { |
| omap4_hwc_module_t *hwc_mod = (omap4_hwc_module_t *)module; |
| omap4_hwc_device_t *hwc_dev; |
| int err = 0; |
| |
| if (strcmp(name, HWC_HARDWARE_COMPOSER)) { |
| return -EINVAL; |
| } |
| |
| if (!hwc_mod->fb_dev) { |
| err = omap4_hwc_open_fb_hal(&hwc_mod->fb_dev); |
| if (err) |
| return err; |
| |
| if (!hwc_mod->fb_dev) { |
| ALOGE("Framebuffer HAL not opened before HWC"); |
| return -EFAULT; |
| } |
| hwc_mod->fb_dev->bBypassPost = 1; |
| } |
| |
| hwc_dev = (omap4_hwc_device_t *)malloc(sizeof(*hwc_dev)); |
| if (hwc_dev == NULL) |
| return -ENOMEM; |
| |
| memset(hwc_dev, 0, sizeof(*hwc_dev)); |
| |
| hwc_dev->base.common.tag = HARDWARE_DEVICE_TAG; |
| hwc_dev->base.common.version = HWC_DEVICE_API_VERSION_1_0; |
| hwc_dev->base.common.module = (hw_module_t *)module; |
| hwc_dev->base.common.close = omap4_hwc_device_close; |
| hwc_dev->base.prepare = omap4_hwc_prepare; |
| hwc_dev->base.set = omap4_hwc_set; |
| hwc_dev->base.eventControl = omap4_hwc_event_control; |
| hwc_dev->base.blank = omap4_hwc_blank; |
| hwc_dev->base.query = omap4_hwc_query; |
| hwc_dev->base.registerProcs = omap4_hwc_registerProcs; |
| hwc_dev->base.dump = omap4_hwc_dump; |
| hwc_dev->fb_dev = hwc_mod->fb_dev; |
| *device = &hwc_dev->base.common; |
| |
| hwc_dev->dsscomp_fd = open("/dev/dsscomp", O_RDWR); |
| if (hwc_dev->dsscomp_fd < 0) { |
| ALOGE("failed to open dsscomp (%d)", errno); |
| err = -errno; |
| goto done; |
| } |
| |
| hwc_dev->hdmi_fb_fd = open("/dev/graphics/fb1", O_RDWR); |
| if (hwc_dev->hdmi_fb_fd < 0) { |
| ALOGE("failed to open hdmi fb (%d)", errno); |
| err = -errno; |
| goto done; |
| } |
| |
| hwc_dev->fb_fd = open("/dev/graphics/fb0", O_RDWR); |
| if (hwc_dev->fb_fd < 0) { |
| ALOGE("failed to open fb (%d)", errno); |
| err = -errno; |
| goto done; |
| } |
| |
| struct fb_fix_screeninfo fix; |
| if (ioctl(hwc_dev->fb_fd, FBIOGET_FSCREENINFO, &fix)) { |
| ALOGE("failed to get fb info (%d)", errno); |
| err = -errno; |
| goto done; |
| } |
| |
| hwc_dev->img_mem_size = fix.smem_len; |
| hwc_dev->img_mem_ptr = mmap(NULL, fix.smem_len, PROT_WRITE, MAP_SHARED, hwc_dev->fb_fd, 0); |
| if (hwc_dev->img_mem_ptr == MAP_FAILED) { |
| ALOGE("failed to map fb memory"); |
| err = -errno; |
| goto done; |
| } |
| |
| hwc_dev->buffers = malloc(sizeof(buffer_handle_t) * MAX_HW_OVERLAYS); |
| if (!hwc_dev->buffers) { |
| err = -ENOMEM; |
| goto done; |
| } |
| |
| int ret = ioctl(hwc_dev->dsscomp_fd, DSSCIOC_QUERY_DISPLAY, &hwc_dev->fb_dis); |
| if (ret) { |
| ALOGE("failed to get display info (%d): %m", errno); |
| err = -errno; |
| goto done; |
| } |
| |
| if (hwc_dev->fb_dis.timings.x_res && hwc_dev->fb_dis.height_in_mm) { |
| hwc_dev->ext.lcd_xpy = (float) |
| hwc_dev->fb_dis.width_in_mm / hwc_dev->fb_dis.timings.x_res / |
| hwc_dev->fb_dis.height_in_mm * hwc_dev->fb_dis.timings.y_res; |
| } else { |
| ALOGE("x resolution or the height is not populated setting lcd_xpy to 1.0\n"); |
| hwc_dev->ext.lcd_xpy = 1.0; |
| } |
| |
| if (pipe(hwc_dev->pipe_fds) == -1) { |
| ALOGE("failed to event pipe (%d): %m", errno); |
| err = -errno; |
| goto done; |
| } |
| |
| if (pthread_mutex_init(&hwc_dev->lock, NULL)) { |
| ALOGE("failed to create mutex (%d): %m", errno); |
| err = -errno; |
| goto done; |
| } |
| if (pthread_create(&hwc_dev->hdmi_thread, NULL, omap4_hwc_hdmi_thread, hwc_dev)) |
| { |
| ALOGE("failed to create HDMI listening thread (%d): %m", errno); |
| err = -errno; |
| goto done; |
| } |
| |
| /* get debug properties */ |
| |
| /* see if hwc is enabled at all */ |
| char value[PROPERTY_VALUE_MAX]; |
| property_get("debug.hwc.rgb_order", value, "1"); |
| hwc_dev->flags_rgb_order = atoi(value); |
| property_get("debug.hwc.nv12_only", value, "0"); |
| hwc_dev->flags_nv12_only = atoi(value); |
| property_get("debug.hwc.idle", value, "250"); |
| hwc_dev->idle = atoi(value); |
| |
| /* get the board specific clone properties */ |
| /* 0:0:1280:720 */ |
| if (property_get("persist.hwc.mirroring.region", value, "") <= 0 || |
| sscanf(value, "%d:%d:%d:%d", |
| &hwc_dev->ext.mirror_region.left, &hwc_dev->ext.mirror_region.top, |
| &hwc_dev->ext.mirror_region.right, &hwc_dev->ext.mirror_region.bottom) != 4 || |
| hwc_dev->ext.mirror_region.left >= hwc_dev->ext.mirror_region.right || |
| hwc_dev->ext.mirror_region.top >= hwc_dev->ext.mirror_region.bottom) { |
| struct hwc_rect fb_region = { .right = hwc_dev->fb_dev->base.width, .bottom = hwc_dev->fb_dev->base.height }; |
| hwc_dev->ext.mirror_region = fb_region; |
| } |
| ALOGI("clone region is set to (%d,%d) to (%d,%d)", |
| hwc_dev->ext.mirror_region.left, hwc_dev->ext.mirror_region.top, |
| hwc_dev->ext.mirror_region.right, hwc_dev->ext.mirror_region.bottom); |
| |
| /* read switch state */ |
| int sw_fd = open("/sys/class/switch/hdmi/state", O_RDONLY); |
| if (sw_fd >= 0) { |
| char value; |
| if (read(sw_fd, &value, 1) == 1) |
| hwc_dev->ext.hdmi_state = value == '1'; |
| close(sw_fd); |
| } |
| sw_fd = open("/sys/class/switch/dock/state", O_RDONLY); |
| if (sw_fd >= 0) { |
| char value; |
| if (read(sw_fd, &value, 1) == 1) |
| hwc_dev->ext.force_dock = value == '1'; |
| close(sw_fd); |
| } |
| handle_hotplug(hwc_dev); |
| |
| ALOGI("omap4_hwc_device_open(rgb_order=%d nv12_only=%d)", |
| hwc_dev->flags_rgb_order, hwc_dev->flags_nv12_only); |
| |
| done: |
| if (err && hwc_dev) { |
| if (hwc_dev->dsscomp_fd >= 0) |
| close(hwc_dev->dsscomp_fd); |
| if (hwc_dev->hdmi_fb_fd >= 0) |
| close(hwc_dev->hdmi_fb_fd); |
| if (hwc_dev->fb_fd >= 0) |
| close(hwc_dev->fb_fd); |
| pthread_mutex_destroy(&hwc_dev->lock); |
| free(hwc_dev->buffers); |
| free(hwc_dev); |
| } |
| |
| return err; |
| } |
| |
| static struct hw_module_methods_t omap4_hwc_module_methods = { |
| .open = omap4_hwc_device_open, |
| }; |
| |
| omap4_hwc_module_t HAL_MODULE_INFO_SYM = { |
| .base = { |
| .common = { |
| .tag = HARDWARE_MODULE_TAG, |
| .module_api_version = HWC_MODULE_API_VERSION_0_1, |
| .hal_api_version = HARDWARE_HAL_API_VERSION, |
| .id = HWC_HARDWARE_MODULE_ID, |
| .name = "OMAP 44xx Hardware Composer HAL", |
| .author = "Texas Instruments", |
| .methods = &omap4_hwc_module_methods, |
| }, |
| }, |
| }; |