blob: e157f8664952c7342d50ab6899a508b976fc9fe7 [file] [log] [blame]
<html><body><pre>Application.mk file syntax specification
Introduction:
-------------
This document describes the syntax of Application.mk build files
written to describe the native modules required by your Android
application. To understand what follows, it is assumed that you have
read the docs/OVERVIEW.html file that explains their role and
usage.
Readers of this document should have read docs/OVERVIEW.html and
docs/ANDROID-MK.html
Overview:
---------
The purpose of Application.mk is to describe which native
'modules' (i.e. static/shared libraries) are needed by your
application.
An Application.mk file is usually placed under $PROJECT/jni/Application.mk,
where $PROJECT points to your application's project directory.
Another alternative is to place it under a sub-directory of the top-level
$NDK/apps directory, e.g.:
$NDK/apps/&lt;myapp&gt;/Application.mk
Where &lt;myapp&gt; is a short name used to describe your 'application'
to the NDK build system (this name doesn't go into your generated
shared libraries or your final packages).
The Application.mk is really a tiny GNU Makefile fragment that must
define a few variables:
APP_PROJECT_PATH
This variable should give the *absolute* path to your
Application's project root directory. This is used to copy/install
stripped versions of the generated JNI shared libraries to a
specific location known to the APK-generating tools.
Note that it is optional for $PROJECT/jni/Application.mk, but
*mandatory* for $NDK/apps/&lt;myapp&gt;/Application.mk
APP_MODULES
This variable is optional. If not defined, the NDK will build by
default _all_ the modules declared by your Android.mk, and any
sub-makefile it may include.
If APP_MODULES is defined, it must be a space-separated list of module
names as they appear in the LOCAL_MODULE definitions of Android.mk
files. Note that the NDK will compute module dependencies automatically.
NOTE: This variable's behaviour changed in NDK r4. Before that:
- the variable was mandatory in your Application.mk
- all required modules had to be listed explicitly.
APP_OPTIM
This optional variable can be defined to either 'release' or
'debug'. This is used to alter the optimization level when
building your application's modules.
A 'release' mode is the default, and will generate highly
optimized binaries. The 'debug' mode will generate un-optimized
binaries which are much easier to debug.
Note that if your application is debuggable (i.e. if your manifest
sets the android:debuggable attribute to "true" in its &lt;application&gt;
tag), the default will be 'debug' instead of 'release'. This can
be overridden by setting APP_OPTIM to 'release'.
Note that it is possible to debug both 'release' and 'debug'
binaries, but the 'release' builds tend to provide less information
during debugging sessions: some variables are optimized out and
can't be inspected, code re-ordering can make stepping through
the code difficult, stack traces may not be reliable, etc...
APP_CFLAGS
A set of C compiler flags passed when compiling any C or C++ source code
of any of the modules. This can be used to change the build of a given
module depending on the application that needs it, instead of modifying
the Android.mk file itself.
IMPORTANT WARNING: +++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ All paths in these flags should be relative to the top-level NDK
+ directory. For example, if you have the following setup:
+
+ sources/foo/Android.mk
+ sources/bar/Android.mk
+
+ To specify in foo/Android.mk that you want to add the path to the
+ 'bar' sources during compilation, you should use:
+
+ APP_CFLAGS += -Isources/bar
+
+ Or alternatively:
+
+ APP_CFLAGS += -I$(LOCAL_PATH)/../bar
+
+ Using '-I../bar' will *NOT* work since it will be equivalent to
+ '-I$NDK_ROOT/../bar' instead.
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
NOTE: In android-ndk-1.5_r1, this only applied to C sources, not C++ ones.
This has been corrected to match the full Android build system.
APP_CXXFLAGS
An alias for APP_CPPFLAGS, to be considered obsolete as it may disappear
in a future release of the NDK.
APP_CPPFLAGS
A set of C++ compiler flags passed when building C++ sources *only*.
NOTE: In android-ndk-1.5_r1, this applied to both C and C++ sources.
This has been corrected to match the full Android build system.
You can now use APP_CFLAGS for flags that shall apply to C and
C++ sources.
APP_BUILD_SCRIPT
By default, the NDK build system will look for a file named Android.mk
under $(APP_PROJECT_PATH)/jni, i.e. for the file:
$(APP_PROJECT_PATH)/jni/Android.mk
If you want to override this behaviour, you can define APP_BUILD_SCRIPT
to point to an alternate build script. A non-absolute path will always
be interpreted as relative to the NDK's top-level directory.
APP_ABI
By default, the NDK build system will generate machine code for the
'armeabi' ABI. This corresponds to an ARMv5TE based CPU with software
floating point operations. You can use APP_ABI to select a different
ABI.
For example, to support hardware FPU instructions on ARMv7 based devices,
use:
APP_ABI := armeabi-v7a
Or to support the IA-32 instruction set, use:
APP_ABI := x86
Or to support the MIPS instruction set, use:
APP_ABI := mips
Or to support all at the same time, use:
APP_ABI := armeabi armeabi-v7a x86 mips
Or even better, since NDK r7, you can also use the special value
'all' which means "all ABIs supported by this NDK release":
APP_ABI := all
For the list of all supported ABIs and details about their usage and
limitations, please read docs/CPU-ARCH-ABIS.html
APP_PLATFORM
Name the target Android platform. For example, 'android-3' correspond
to Android 1.5 system images. For a complete list of platform names and
corresponding Android system images, read docs/STABLE-APIS.html.
APP_STL
By default, the NDK build system provides C++ headers for the minimal
C++ runtime library (/system/lib/libstdc++.so) provided by the Android
system.
However, the NDK comes with alternative C++ implementations that you can
use or link to in your own applications. Define APP_STL to select one of
them. Examples are:
APP_STL := stlport_static --> static STLport library
APP_STL := stlport_shared --> shared STLport library
APP_STL := system --> default C++ runtime library
For more information on the subject, please read docs/CPLUSPLUS-SUPPORT.html
APP_GNUSTL_FORCE_CPP_FEATURES
In prior NDK versions, the simple fact of using the GNU libstdc++
runtime (i.e. by setting APP_STL to either 'gnustl_static' or
'gnustl_shared') enforced the support for exceptions and RTTI in all
generated machine code. This could be problematic in specific, but rare,
cases, and also generated un-necessarily bigger code for projects that
don't require these features.
This bug was fixed in NDK r7b, but this means that if your code requires
exceptions or RTTI, it should now explicitly say so, either in your
APP_CPPFLAGS, or your LOCAL_CPPFLAGS / LOCAL_CPP_FEATURES definitions.
To make it easier to port projects to NDK r7b and later, one can
optionally defined APP_GNUSTL_CPP_FEATURES to contain one or more of the
following values:
exceptions -> to enforce exceptions support for all modules.
rtti -> to enforce rtti support for all modules.
For example, to get the exact same behaviour than NDK r7:
APP_GNUSTL_FORCE_CPP_FEATURES := exceptions rtti
IMPORTANT: This variable is provided here as a convenience to make it
easier to transition to a newer version of the NDK. It will
be removed in a future revision. We thus encourage all
developers to modify the module definitions properly instead
of relying on it here.
APP_SHORT_COMMANDS
The equivalent of LOCAL_SHORT_COMMANDS for your whole project. See the
documentation for this variable in docs/ANDROID-MK.html.
NDK_TOOLCHAIN_VERSION
Define this variable to either 4.4.3 or 4.6 to select version of GCC compiler.
4.6 is the default
APP_PIE
Starting from Jelly Bean (4.1), Android's dynamic linker supports
position-independent executables (PIE), which are built with -fPIE.
This flag makes it harder to exploit memory corruption bugs by
randomization the location of the code.
By default, ndk-build will automatically set this value to 'true' if
your project targets android-16 or higher. You may set it manually
to either 'true' or 'false'.
IMPORTANT: PIE executables *cannot* run on Android releases prior to 4.1.
Note that this only applies to executables. It has no effect when
building shared or static libraries.
A trivial Application.mk file would be:
-------------- cut here -------------------------
APP_PROJECT_PATH := &lt;path to project&gt;
-------------- cut here -------------------------
</pre></body></html>