sources/host-tools/make-3.81/SMakefile - platform/ndk - Git at Google

 # -*-Makefile-*- for building GNU make with smake
 #
 # NOTE: If you have no 'make' program at all to process this makefile,
 # run 'build.sh' instead.
 #
 # Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
 # 2005, 2006 Free Software Foundation, Inc.
 # This file is part of GNU Make.
 #
 # GNU Make is free software; you can redistribute it and/or modify it under the
 # terms of the GNU General Public License as published by the Free Software
 # Foundation; either version 2, or (at your option) any later version.
 #
 # GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
 # WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
 # A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License along with
 # GNU Make; see the file COPYING.  If not, write to the Free Software
 # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

 #
 #	Makefile for GNU Make
 #

 # Ultrix 2.2 make doesn't expand the value of VPATH.
 VPATH = /make-3.81/
 # This must repeat the value, because configure will remove `VPATH = .'.
 srcdir = /make-3.81/

 CC = sc
 RM = delete
 MAKE = smake

 CFLAGS =
 CPPFLAGS =
 LDFLAGS =

 # Define these for your system as follows:
 #	-DNO_ARCHIVES		To disable `ar' archive support.
 #	-DNO_FLOAT		To avoid using floating-point numbers.
 #	-DENUM_BITFIELDS	If the compiler isn't GCC but groks enum foo:2.
 #				Some compilers apparently accept this
 #				without complaint but produce losing code,
 #				so beware.
 # NeXT 1.0a uses an old version of GCC, which required -D__inline=inline.
 # See also `config.h'.
 defines =

 # Which flavor of remote job execution support to use.
 # The code is found in `remote-$(REMOTE).c'.
 REMOTE = stub

 # If you are using the GNU C library, or have the GNU getopt functions in
 # your C library, you can comment these out.
 GETOPT = getopt.o getopt1.o
 GETOPT_SRC = $(srcdir)getopt.c $(srcdir)getopt1.c $(srcdir)getopt.h

 # If you are using the GNU C library, or have the GNU glob functions in
 # your C library, you can comment this out.  GNU make uses special hooks
 # into the glob functions to be more efficient (by using make's directory
 # cache for globbing), so you must use the GNU functions even if your
 # system's C library has the 1003.2 glob functions already.  Also, the glob
 # functions in the AIX and HPUX C libraries are said to be buggy.
 GLOB = Lib glob/glob.lib

 # If your system doesn't have alloca, or the one provided is bad, define this.
 ALLOCA = alloca.o
 ALLOCA_SRC = $(srcdir)alloca.c

 # If your system needs extra libraries loaded in, define them here.
 # System V probably need -lPW for alloca.  HP-UX 7.0's alloca in
 # libPW.a is broken on HP9000s300 and HP9000s400 machines.  Use
 # alloca.c instead on those machines.
 LOADLIBES =

 # Any extra object files your system needs.
 extras = amiga.o

 # Common prefix for machine-independent installed files.
 prefix =
 # Common prefix for machine-dependent installed files.
 exec_prefix =

 # Directory to install `make' in.
 bindir = sc:c
 # Directory to find libraries in for `-lXXX'.
 libdir = lib:
 # Directory to search by default for included makefiles.
 includedir = include:
 # Directory to install the Info files in.
 infodir = doc:
 # Directory to install the man page in.
 mandir = t:
 # Number to put on the man page filename.
 manext = 1
 # Prefix to put on installed `make' binary file name.
 binprefix =
 # Prefix to put on installed `make' man page file name.
 manprefix = $(binprefix)

 # Whether or not make needs to be installed setgid.
 # The value should be either `true' or `false'.
 # On many systems, the getloadavg function (used to implement the `-l'
 # switch) will not work unless make is installed setgid kmem.
 install_setgid = false
 # Install make setgid to this group so it can read /dev/kmem.
 group = sys

 # Program to install `make'.
 INSTALL_PROGRAM = copy
 # Program to install the man page.
 INSTALL_DATA = copy
 # Generic install program.
 INSTALL = copy

 # Program to format Texinfo source into Info files.
 MAKEINFO = makeinfo
 # Program to format Texinfo source into DVI files.
 TEXI2DVI = texi2dvi

 # Programs to make tags files.
 ETAGS = etags -w
 CTAGS = ctags -w

 objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o	\
        rule.o implicit.o default.o variable.o expand.o function.o	\
        vpath.o version.o ar.o arscan.o signame.o strcache.o hash.o      \
        remote-$(REMOTE).o $(GLOB) $(GETOPT) $(ALLOCA) $(extras)
 srcs = $(srcdir)commands.c $(srcdir)job.c $(srcdir)dir.c             \
        $(srcdir)file.c $(srcdir)getloadavg.c $(srcdir)misc.c         \
        $(srcdir)main.c $(srcdir)read.c $(srcdir)remake.c             \
        $(srcdir)rule.c $(srcdir)implicit.c $(srcdir)default.c        \
        $(srcdir)variable.c $(srcdir)expand.c $(srcdir)function.c     \
        $(srcdir)vpath.c $(srcdir)version.c $(srcdir)hash.c           \
        $(srcdir)remote-$(REMOTE).c                                     \
        $(srcdir)ar.c $(srcdir)arscan.c $(srcdir)strcache.c              \
        $(srcdir)signame.c $(srcdir)signame.h $(GETOPT_SRC)            \
        $(srcdir)commands.h $(srcdir)dep.h $(srcdir)file.h            \
        $(srcdir)job.h $(srcdir)make.h $(srcdir)rule.h                \
        $(srcdir)variable.h $(ALLOCA_SRC) $(srcdir)config.h.in


 .SUFFIXES:
 .SUFFIXES: .o .c .h .ps .dvi .info .texinfo

 all: make
 info: make.info
 dvi: make.dvi
 # Some makes apparently use .PHONY as the default goal if it is before `all'.
 .PHONY: all check info dvi

 make.info: make.texinfo
 	$(MAKEINFO) -I$(srcdir) $(srcdir)make.texinfo -o make.info

 make.dvi: make.texinfo
 	$(TEXI2DVI) $(srcdir)make.texinfo

 make.ps: make.dvi
 	dvi2ps make.dvi > make.ps

 make: $(objs) glob/glob.lib
 	$(CC) Link $(LDFLAGS) $(objs) $(LOADLIBES) To make.new
 	-delete quiet make
 	rename make.new make

 # -I. is needed to find config.h in the build directory.
 .c.o:
 	$(CC) $(defines) IDir "" IDir $(srcdir)glob \
 	      $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)

 glob/glob.lib:
 	execute <<
 	    cd glob
 	    smake
 <

 tagsrcs = $(srcs) $(srcdir)remote-*.c
 TAGS: $(tagsrcs)
 	$(ETAGS) $(tagsrcs)
 tags: $(tagsrcs)
 	$(CTAGS) $(tagsrcs)

 .PHONY: install installdirs
 install:
 	copy make sc:c

 loadavg: loadavg.c config.h
 	$(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \
 	      loadavg.c $(LOADLIBES) -o $@

 clean: glob-clean
 	-$(RM) -f make loadavg *.o core make.dvi

 distclean: clean glob-realclean
 	-$(RM) -f Makefile config.h config.status build.sh
 	-$(RM) -f config.log config.cache
 	-$(RM) -f TAGS tags
 	-$(RM) -f make.?? make.??s make.log make.toc make.*aux
 	-$(RM) -f loadavg.c

 realclean: distclean
 	-$(RM) -f make.info*

 mostlyclean: clean

 .PHONY: glob-clean glob-realclean

 glob-clean glob-realclean:
 	execute <<
 	cd glob
 	smake $@
 <

 # --------------- DEPENDENCIES
 #

 # .deps/alloca.Po
 # dummy

 # .deps/ar.Po
 ar.o ar.o: ar.c make.h config.h \
   getopt.h \
   gettext.h filedef.h hash.h dep.h \

 # .deps/arscan.Po
 arscan.o arscan.o: arscan.c make.h config.h \
   getopt.h \
   gettext.h \

 # .deps/commands.Po
 commands.o commands.o: commands.c make.h config.h \
   getopt.h \
   gettext.h dep.h filedef.h hash.h variable.h \
   job.h commands.h

 # .deps/default.Po
 default.o default.o: default.c make.h config.h \
   getopt.h \
   gettext.h filedef.h hash.h variable.h rule.h \
   dep.h job.h commands.h

 # .deps/dir.Po
 dir.o dir.o: dir.c make.h config.h \
   getopt.h \
   gettext.h hash.h \

 # .deps/expand.Po
 expand.o expand.o: expand.c make.h config.h \
   getopt.h \
   gettext.h filedef.h hash.h \
   job.h commands.h \
   variable.h rule.h

 # .deps/file.Po
 file.o file.o: file.c make.h config.h \
   getopt.h \
   gettext.h dep.h filedef.h \
   hash.h job.h commands.h \
   variable.h debug.h

 # .deps/function.Po
 function.o function.o: function.c make.h config.h \
   getopt.h \
   gettext.h filedef.h hash.h variable.h dep.h \
   job.h commands.h debug.h

 # .deps/getloadavg.Po
 # dummy

 # .deps/getopt.Po
 getopt.o getopt.o: getopt.c config.h \

 # .deps/getopt1.Po
 getopt1.o getopt1.o: getopt1.c config.h getopt.h \

 # .deps/hash.Po
 hash.o hash.o: hash.c make.h config.h \
   getopt.h \
   gettext.h hash.h

 # .deps/implicit.Po
 implicit.o implicit.o: implicit.c make.h config.h \
   getopt.h \
   gettext.h filedef.h hash.h rule.h dep.h debug.h \
   variable.h job.h \
   commands.h

 # .deps/job.Po
 job.o job.o: job.c make.h config.h \
   getopt.h \
   gettext.h job.h \
   debug.h filedef.h hash.h \
   commands.h variable.h \

 # .deps/loadavg-getloadavg.Po
 loadavg-getloadavg.o loadavg-getloadavg.o: getloadavg.c config.h \
   make.h \
   getopt.h \
   gettext.h \

 # .deps/main.Po
 main.o main.o: main.c make.h config.h \
   getopt.h \
   gettext.h dep.h filedef.h hash.h variable.h \
   job.h commands.h rule.h \
   debug.h getopt.h \

 # .deps/misc.Po
 misc.o misc.o: misc.c make.h config.h \
   getopt.h \
   gettext.h dep.h debug.h

 # .deps/read.Po
 read.o read.o: read.c make.h config.h \
   getopt.h \
   gettext.h \
   dep.h filedef.h hash.h job.h \
   commands.h variable.h rule.h debug.h \

 # .deps/remake.Po
 remake.o remake.o: remake.c make.h config.h \
   getopt.h \
   gettext.h filedef.h hash.h job.h \
   commands.h dep.h \
   variable.h debug.h

 # .deps/remote-cstms.Po
 # dummy

 # .deps/remote-stub.Po
 remote-stub.o remote-stub.o: remote-stub.c make.h config.h \
   getopt.h \
   gettext.h filedef.h hash.h job.h \
   commands.h

 # .deps/rule.Po
 rule.o rule.o: rule.c make.h config.h \
   getopt.h \
   gettext.h dep.h filedef.h hash.h job.h \
   commands.h variable.h \
   rule.h

 # .deps/signame.Po
 signame.o signame.o: signame.c make.h config.h \
   getopt.h \
   gettext.h

 # .deps/strcache.Po
 strcache.o strcache.o: strcache.c make.h config.h \
   getopt.h \
   gettext.h hash.h

 # .deps/variable.Po
 variable.o variable.o: variable.c make.h config.h \
   getopt.h \
   gettext.h dep.h filedef.h \
   hash.h job.h commands.h \
   variable.h rule.h

 # .deps/version.Po
 version.o version.o: version.c config.h

 # .deps/vmsjobs.Po
 # dummy

 # .deps/vpath.Po
 vpath.o vpath.o: vpath.c make.h config.h \
   getopt.h \
   gettext.h filedef.h hash.h variable.h
	# --Makefile-- for building GNU make with smake
	#
	# NOTE: If you have no 'make' program at all to process this makefile,
	# run 'build.sh' instead.
	#
	# Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
	# 2005, 2006 Free Software Foundation, Inc.
	# This file is part of GNU Make.
	#
	# GNU Make is free software; you can redistribute it and/or modify it under the
	# terms of the GNU General Public License as published by the Free Software
	# Foundation; either version 2, or (at your option) any later version.
	#
	# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
	# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	#
	# You should have received a copy of the GNU General Public License along with
	# GNU Make; see the file COPYING. If not, write to the Free Software
	# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

	#
	# Makefile for GNU Make
	#

	# Ultrix 2.2 make doesn't expand the value of VPATH.
	VPATH = /make-3.81/
	# This must repeat the value, because configure will remove `VPATH = .'.
	srcdir = /make-3.81/

	CC = sc
	RM = delete
	MAKE = smake

	CFLAGS =
	CPPFLAGS =
	LDFLAGS =

	# Define these for your system as follows:
	# -DNO_ARCHIVES To disable `ar' archive support.
	# -DNO_FLOAT To avoid using floating-point numbers.
	# -DENUM_BITFIELDS If the compiler isn't GCC but groks enum foo:2.
	# Some compilers apparently accept this
	# without complaint but produce losing code,
	# so beware.
	# NeXT 1.0a uses an old version of GCC, which required -D__inline=inline.
	# See also `config.h'.
	defines =

	# Which flavor of remote job execution support to use.
	# The code is found in `remote-$(REMOTE).c'.
	REMOTE = stub

	# If you are using the GNU C library, or have the GNU getopt functions in
	# your C library, you can comment these out.
	GETOPT = getopt.o getopt1.o
	GETOPT_SRC = $(srcdir)getopt.c $(srcdir)getopt1.c $(srcdir)getopt.h

	# If you are using the GNU C library, or have the GNU glob functions in
	# your C library, you can comment this out. GNU make uses special hooks
	# into the glob functions to be more efficient (by using make's directory
	# cache for globbing), so you must use the GNU functions even if your
	# system's C library has the 1003.2 glob functions already. Also, the glob
	# functions in the AIX and HPUX C libraries are said to be buggy.
	GLOB = Lib glob/glob.lib

	# If your system doesn't have alloca, or the one provided is bad, define this.
	ALLOCA = alloca.o
	ALLOCA_SRC = $(srcdir)alloca.c

	# If your system needs extra libraries loaded in, define them here.
	# System V probably need -lPW for alloca. HP-UX 7.0's alloca in
	# libPW.a is broken on HP9000s300 and HP9000s400 machines. Use
	# alloca.c instead on those machines.
	LOADLIBES =

	# Any extra object files your system needs.
	extras = amiga.o

	# Common prefix for machine-independent installed files.
	prefix =
	# Common prefix for machine-dependent installed files.
	exec_prefix =

	# Directory to install `make' in.
	bindir = sc:c
	# Directory to find libraries in for `-lXXX'.
	libdir = lib:
	# Directory to search by default for included makefiles.
	includedir = include:
	# Directory to install the Info files in.
	infodir = doc:
	# Directory to install the man page in.
	mandir = t:
	# Number to put on the man page filename.
	manext = 1
	# Prefix to put on installed `make' binary file name.
	binprefix =
	# Prefix to put on installed `make' man page file name.
	manprefix = $(binprefix)

	# Whether or not make needs to be installed setgid.
	# The value should be either `true' or `false'.
	# On many systems, the getloadavg function (used to implement the `-l'
	# switch) will not work unless make is installed setgid kmem.
	install_setgid = false
	# Install make setgid to this group so it can read /dev/kmem.
	group = sys

	# Program to install `make'.
	INSTALL_PROGRAM = copy
	# Program to install the man page.
	INSTALL_DATA = copy
	# Generic install program.
	INSTALL = copy

	# Program to format Texinfo source into Info files.
	MAKEINFO = makeinfo
	# Program to format Texinfo source into DVI files.
	TEXI2DVI = texi2dvi

	# Programs to make tags files.
	ETAGS = etags -w
	CTAGS = ctags -w

	objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o \
	rule.o implicit.o default.o variable.o expand.o function.o \
	vpath.o version.o ar.o arscan.o signame.o strcache.o hash.o \
	remote-$(REMOTE).o $(GLOB) $(GETOPT) $(ALLOCA) $(extras)
	srcs = $(srcdir)commands.c $(srcdir)job.c $(srcdir)dir.c \
	$(srcdir)file.c $(srcdir)getloadavg.c $(srcdir)misc.c \
	$(srcdir)main.c $(srcdir)read.c $(srcdir)remake.c \
	$(srcdir)rule.c $(srcdir)implicit.c $(srcdir)default.c \
	$(srcdir)variable.c $(srcdir)expand.c $(srcdir)function.c \
	$(srcdir)vpath.c $(srcdir)version.c $(srcdir)hash.c \
	$(srcdir)remote-$(REMOTE).c \
	$(srcdir)ar.c $(srcdir)arscan.c $(srcdir)strcache.c \
	$(srcdir)signame.c $(srcdir)signame.h $(GETOPT_SRC) \
	$(srcdir)commands.h $(srcdir)dep.h $(srcdir)file.h \
	$(srcdir)job.h $(srcdir)make.h $(srcdir)rule.h \
	$(srcdir)variable.h $(ALLOCA_SRC) $(srcdir)config.h.in


	.SUFFIXES:
	.SUFFIXES: .o .c .h .ps .dvi .info .texinfo

	all: make
	info: make.info
	dvi: make.dvi
	# Some makes apparently use .PHONY as the default goal if it is before `all'.
	.PHONY: all check info dvi

	make.info: make.texinfo
	$(MAKEINFO) -I$(srcdir) $(srcdir)make.texinfo -o make.info

	make.dvi: make.texinfo
	$(TEXI2DVI) $(srcdir)make.texinfo

	make.ps: make.dvi
	dvi2ps make.dvi > make.ps

	make: $(objs) glob/glob.lib
	$(CC) Link $(LDFLAGS) $(objs) $(LOADLIBES) To make.new
	-delete quiet make
	rename make.new make

	# -I. is needed to find config.h in the build directory.
	.c.o:
	$(CC) $(defines) IDir "" IDir $(srcdir)glob \
	$(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)

	glob/glob.lib:
	execute <<
	cd glob
	smake
	<

	tagsrcs = $(srcs) $(srcdir)remote-*.c
	TAGS: $(tagsrcs)
	$(ETAGS) $(tagsrcs)
	tags: $(tagsrcs)
	$(CTAGS) $(tagsrcs)

	.PHONY: install installdirs
	install:
	copy make sc:c

	loadavg: loadavg.c config.h
	$(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \
	loadavg.c $(LOADLIBES) -o $@

	clean: glob-clean
	-$(RM) -f make loadavg *.o core make.dvi

	distclean: clean glob-realclean
	-$(RM) -f Makefile config.h config.status build.sh
	-$(RM) -f config.log config.cache
	-$(RM) -f TAGS tags
	-$(RM) -f make.?? make.??s make.log make.toc make.*aux
	-$(RM) -f loadavg.c

	realclean: distclean
	-$(RM) -f make.info*

	mostlyclean: clean

	.PHONY: glob-clean glob-realclean

	glob-clean glob-realclean:
	execute <<
	cd glob
	smake $@
	<

	# --------------- DEPENDENCIES
	#

	# .deps/alloca.Po
	# dummy

	# .deps/ar.Po
	ar.o ar.o: ar.c make.h config.h \
	getopt.h \
	gettext.h filedef.h hash.h dep.h \

	# .deps/arscan.Po
	arscan.o arscan.o: arscan.c make.h config.h \
	getopt.h \
	gettext.h \

	# .deps/commands.Po
	commands.o commands.o: commands.c make.h config.h \
	getopt.h \
	gettext.h dep.h filedef.h hash.h variable.h \
	job.h commands.h

	# .deps/default.Po
	default.o default.o: default.c make.h config.h \
	getopt.h \
	gettext.h filedef.h hash.h variable.h rule.h \
	dep.h job.h commands.h

	# .deps/dir.Po
	dir.o dir.o: dir.c make.h config.h \
	getopt.h \
	gettext.h hash.h \

	# .deps/expand.Po
	expand.o expand.o: expand.c make.h config.h \
	getopt.h \
	gettext.h filedef.h hash.h \
	job.h commands.h \
	variable.h rule.h

	# .deps/file.Po
	file.o file.o: file.c make.h config.h \
	getopt.h \
	gettext.h dep.h filedef.h \
	hash.h job.h commands.h \
	variable.h debug.h

	# .deps/function.Po
	function.o function.o: function.c make.h config.h \
	getopt.h \
	gettext.h filedef.h hash.h variable.h dep.h \
	job.h commands.h debug.h

	# .deps/getloadavg.Po
	# dummy

	# .deps/getopt.Po
	getopt.o getopt.o: getopt.c config.h \

	# .deps/getopt1.Po
	getopt1.o getopt1.o: getopt1.c config.h getopt.h \

	# .deps/hash.Po
	hash.o hash.o: hash.c make.h config.h \
	getopt.h \
	gettext.h hash.h

	# .deps/implicit.Po
	implicit.o implicit.o: implicit.c make.h config.h \
	getopt.h \
	gettext.h filedef.h hash.h rule.h dep.h debug.h \
	variable.h job.h \
	commands.h

	# .deps/job.Po
	job.o job.o: job.c make.h config.h \
	getopt.h \
	gettext.h job.h \
	debug.h filedef.h hash.h \
	commands.h variable.h \

	# .deps/loadavg-getloadavg.Po
	loadavg-getloadavg.o loadavg-getloadavg.o: getloadavg.c config.h \
	make.h \
	getopt.h \
	gettext.h \

	# .deps/main.Po
	main.o main.o: main.c make.h config.h \
	getopt.h \
	gettext.h dep.h filedef.h hash.h variable.h \
	job.h commands.h rule.h \
	debug.h getopt.h \

	# .deps/misc.Po
	misc.o misc.o: misc.c make.h config.h \
	getopt.h \
	gettext.h dep.h debug.h

	# .deps/read.Po
	read.o read.o: read.c make.h config.h \
	getopt.h \
	gettext.h \
	dep.h filedef.h hash.h job.h \
	commands.h variable.h rule.h debug.h \

	# .deps/remake.Po
	remake.o remake.o: remake.c make.h config.h \
	getopt.h \
	gettext.h filedef.h hash.h job.h \
	commands.h dep.h \
	variable.h debug.h

	# .deps/remote-cstms.Po
	# dummy

	# .deps/remote-stub.Po
	remote-stub.o remote-stub.o: remote-stub.c make.h config.h \
	getopt.h \
	gettext.h filedef.h hash.h job.h \
	commands.h

	# .deps/rule.Po
	rule.o rule.o: rule.c make.h config.h \
	getopt.h \
	gettext.h dep.h filedef.h hash.h job.h \
	commands.h variable.h \
	rule.h

	# .deps/signame.Po
	signame.o signame.o: signame.c make.h config.h \
	getopt.h \
	gettext.h

	# .deps/strcache.Po
	strcache.o strcache.o: strcache.c make.h config.h \
	getopt.h \
	gettext.h hash.h

	# .deps/variable.Po
	variable.o variable.o: variable.c make.h config.h \
	getopt.h \
	gettext.h dep.h filedef.h \
	hash.h job.h commands.h \
	variable.h rule.h

	# .deps/version.Po
	version.o version.o: version.c config.h

	# .deps/vmsjobs.Po
	# dummy

	# .deps/vpath.Po
	vpath.o vpath.o: vpath.c make.h config.h \
	getopt.h \
	gettext.h filedef.h hash.h variable.h