build/core/setup-toolchain.mk - platform/ndk - Git at Google

 # Copyright (C) 2009 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #

 # this file is included repeatedly from build/core/setup-abi.mk and is used
 # to setup the target toolchain for a given platform/abi combination.
 #

 $(call assert-defined,TARGET_PLATFORM TARGET_ARCH TARGET_ARCH_ABI)
 $(call assert-defined,NDK_APPS NDK_APP_STL)

 LLVM_VERSION_LIST := 2.6 2.7 2.8 2.9 3.0 3.1 3.2

 # Check that we have a toolchain that supports the current ABI.
 # NOTE: If NDK_TOOLCHAIN is defined, we're going to use it.
 #
 ifndef NDK_TOOLCHAIN
     TARGET_TOOLCHAIN_LIST := $(strip $(sort $(NDK_ABI.$(TARGET_ARCH_ABI).toolchains)))

     # Filter out the Clang toolchain, so that we can keep GCC as the default
     # toolchain.
     $(foreach _ver,$(LLVM_VERSION_LIST), \
         $(eval TARGET_TOOLCHAIN_LIST := \
             $(filter-out %-clang$(_ver),$(TARGET_TOOLCHAIN_LIST))))
     # Filter out 4.7 which is considered experimental at this moment
     TARGET_TOOLCHAIN_LIST := $(filter-out %4.7,$(TARGET_TOOLCHAIN_LIST))

     ifndef TARGET_TOOLCHAIN_LIST
         $(call __ndk_info,There is no toolchain that supports the $(TARGET_ARCH_ABI) ABI.)
         $(call __ndk_info,Please modify the APP_ABI definition in $(NDK_APP_APPLICATION_MK) to use)
         $(call __ndk_info,a set of the following values: $(NDK_ALL_ABIS))
         $(call __ndk_error,Aborting)
     endif
     # Select the last toolchain from the sorted list.
     # For now, this is enough to select armeabi-4.6 by default for ARM
     TARGET_TOOLCHAIN := $(lastword $(TARGET_TOOLCHAIN_LIST))

     # If NDK_TOOLCHAIN_VERSION is defined, we replace the toolchain version
     # suffix with it.
     #
     ifdef NDK_TOOLCHAIN_VERSION
         # Replace "clang" with the most recent verion
         ifeq ($(NDK_TOOLCHAIN_VERSION),clang)
             override NDK_TOOLCHAIN_VERSION := clang$(lastword $(LLVM_VERSION_LIST))
         endif
         # We assume the toolchain name uses dashes (-) as separators and doesn't
         # contain any space. The following is a bit subtle, but essentially
         # does the following:
         #
         #   1/ Use 'subst' to convert dashes into spaces, this generates a list
         #   2/ Use 'chop' to remove the last element of the list
         #   3/ Use 'subst' again to convert the spaces back into dashes
         #
         # So it TARGET_TOOLCHAIN is 'foo-bar-zoo-xxx', then
         # TARGET_TOOLCHAIN_BASE will be 'foo-bar-zoo'
         #
         TARGET_TOOLCHAIN_BASE := $(subst $(space),-,$(call chop,$(subst -,$(space),$(TARGET_TOOLCHAIN))))
         # if TARGET_TOOLCHAIN_BASE is llvm, remove clang from NDK_TOOLCHAIN_VERSION
         VERSION := $(NDK_TOOLCHAIN_VERSION)
         ifeq ($(TARGET_TOOLCHAIN_BASE),llvm)
             VERSION := $(subst clang,,$(NDK_TOOLCHAIN_VERSION))
         endif
         TARGET_TOOLCHAIN := $(TARGET_TOOLCHAIN_BASE)-$(VERSION)
         $(call ndk_log,Using target toolchain '$(TARGET_TOOLCHAIN)' for '$(TARGET_ARCH_ABI)' ABI (through NDK_TOOLCHAIN_VERSION))
     else
         $(call ndk_log,Using target toolchain '$(TARGET_TOOLCHAIN)' for '$(TARGET_ARCH_ABI)' ABI)
     endif
 else # NDK_TOOLCHAIN is not empty
     TARGET_TOOLCHAIN_LIST := $(strip $(filter $(NDK_TOOLCHAIN),$(NDK_ABI.$(TARGET_ARCH_ABI).toolchains)))
     ifndef TARGET_TOOLCHAIN_LIST
         $(call __ndk_info,The selected toolchain ($(NDK_TOOLCHAIN)) does not support the $(TARGET_ARCH_ABI) ABI.)
         $(call __ndk_info,Please modify the APP_ABI definition in $(NDK_APP_APPLICATION_MK) to use)
         $(call __ndk_info,a set of the following values: $(NDK_TOOLCHAIN.$(NDK_TOOLCHAIN).abis))
         $(call __ndk_info,Or change your NDK_TOOLCHAIN definition.)
         $(call __ndk_error,Aborting)
     endif
     TARGET_TOOLCHAIN := $(NDK_TOOLCHAIN)
 endif # NDK_TOOLCHAIN is not empty

 TARGET_ABI := $(TARGET_PLATFORM)-$(TARGET_ARCH_ABI)

 # setup sysroot variable.
 # SYSROOT_INC points to a directory that contains all public header
 # files for a given platform, and
 # SYSROOT_LIB points to libraries and object files used for linking
 # the generated target files properly.
 #
 SYSROOT_INC := $(NDK_PLATFORMS_ROOT)/$(TARGET_PLATFORM)/arch-$(TARGET_ARCH)
 SYSROOT_LINK := $(SYSROOT_INC)

 TARGET_PREBUILT_SHARED_LIBRARIES :=

 # Define default values for TOOLCHAIN_NAME, this can be overriden in
 # the setup file.
 TOOLCHAIN_NAME   := $(TARGET_TOOLCHAIN)
 TOOLCHAIN_VERSION := $(call last,$(subst -,$(space),$(TARGET_TOOLCHAIN)))

 # Define the root path of the toolchain in the NDK tree.
 TOOLCHAIN_ROOT   := $(NDK_ROOT)/toolchains/$(TOOLCHAIN_NAME)

 # Define the root path where toolchain prebuilts are stored
 TOOLCHAIN_PREBUILT_ROOT := $(call host-prebuilt-tag,$(TOOLCHAIN_ROOT))

 # Do the same for TOOLCHAIN_PREFIX. Note that we must chop the version
 # number from the toolchain name, e.g. arm-eabi-4.4.0 -> path/bin/arm-eabi-
 # to do that, we split at dashes, remove the last element, then merge the
 # result. Finally, add the complete path prefix.
 #
 TOOLCHAIN_PREFIX := $(call merge,-,$(call chop,$(call split,-,$(TOOLCHAIN_NAME))))-
 TOOLCHAIN_PREFIX := $(TOOLCHAIN_PREBUILT_ROOT)/bin/$(TOOLCHAIN_PREFIX)

 # We expect the gdbserver binary for this toolchain to be located at its root.
 TARGET_GDBSERVER := $(NDK_ROOT)/prebuilt/android-$(TARGET_ARCH)/gdbserver/gdbserver

 # compute NDK_APP_DST_DIR as the destination directory for the generated files
 NDK_APP_DST_DIR := $(NDK_APP_PROJECT_PATH)/libs/$(TARGET_ARCH_ABI)

 # Default build commands, can be overriden by the toolchain's setup script
 include $(BUILD_SYSTEM)/default-build-commands.mk

 # now call the toolchain-specific setup script
 include $(NDK_TOOLCHAIN.$(TARGET_TOOLCHAIN).setup)

 clean-installed-binaries::

 # Ensure that for debuggable applications, gdbserver will be copied to
 # the proper location

 NDK_APP_GDBSERVER := $(NDK_APP_DST_DIR)/gdbserver
 NDK_APP_GDBSETUP := $(NDK_APP_DST_DIR)/gdb.setup

 ifeq ($(NDK_APP_DEBUGGABLE),true)
 ifeq ($(TARGET_SONAME_EXTENSION),.so)

 installed_modules: $(NDK_APP_GDBSERVER)

 $(NDK_APP_GDBSERVER): PRIVATE_NAME    := $(TOOLCHAIN_NAME)
 $(NDK_APP_GDBSERVER): PRIVATE_SRC     := $(TARGET_GDBSERVER)
 $(NDK_APP_GDBSERVER): PRIVATE_DST     := $(NDK_APP_GDBSERVER)

 $(call generate-file-dir,$(NDK_APP_GDBSERVER))

 $(NDK_APP_GDBSERVER): clean-installed-binaries
 	@ $(HOST_ECHO) "Gdbserver      : [$(PRIVATE_NAME)] $(call pretty-dir,$(PRIVATE_DST))"
 	$(hide) $(call host-install,$(PRIVATE_SRC),$(PRIVATE_DST))

 installed_modules: $(NDK_APP_GDBSETUP)

 $(NDK_APP_GDBSETUP): PRIVATE_DST := $(NDK_APP_GDBSETUP)
 $(NDK_APP_GDBSETUP): PRIVATE_SOLIB_PATH := $(TARGET_OUT)
 $(NDK_APP_GDBSETUP): PRIVATE_SRC_DIRS := $(SYSROOT_INC)/usr/include

 $(NDK_APP_GDBSETUP):
 	@ $(HOST_ECHO) "Gdbsetup       : $(call pretty-dir,$(PRIVATE_DST))"
 	$(hide) $(HOST_ECHO) "set solib-search-path $(call host-path,$(PRIVATE_SOLIB_PATH))" > $(PRIVATE_DST)
 	$(hide) $(HOST_ECHO) "directory $(call host-path,$(call remove-duplicates,$(PRIVATE_SRC_DIRS)))" >> $(PRIVATE_DST)

 $(call generate-file-dir,$(NDK_APP_GDBSETUP))

 # This prevents parallel execution to clear gdb.setup after it has been written to
 $(NDK_APP_GDBSETUP): clean-installed-binaries
 endif
 endif

 # free the dictionary of LOCAL_MODULE definitions
 $(call modules-clear)

 $(call ndk-stl-select,$(NDK_APP_STL))

 # now parse the Android.mk for the application, this records all
 # module declarations, but does not populate the dependency graph yet.
 include $(NDK_APP_BUILD_SCRIPT)

 $(call ndk-stl-add-dependencies,$(NDK_APP_STL))

 # recompute all dependencies between modules
 $(call modules-compute-dependencies)

 # for debugging purpose
 ifdef NDK_DEBUG_MODULES
 $(call modules-dump-database)
 endif

 # now, really build the modules, the second pass allows one to deal
 # with exported values
 $(foreach __pass2_module,$(__ndk_modules),\
     $(eval LOCAL_MODULE := $(__pass2_module))\
     $(eval include $(BUILD_SYSTEM)/build-binary.mk)\
 )

 # Now compute the closure of all module dependencies.
 #
 # If APP_MODULES is not defined in the Application.mk, we
 # will build all modules that were listed from the top-level Android.mk
 # and the installable imported ones they depend on
 #
 ifeq ($(strip $(NDK_APP_MODULES)),)
     WANTED_MODULES := $(call modules-get-all-installable,$(modules-get-top-list))
 else
     WANTED_MODULES := $(call module-get-all-dependencies,$(NDK_APP_MODULES))
 endif

 WANTED_INSTALLED_MODULES += $(call map,module-get-installed,$(WANTED_MODULES))
	# Copyright (C) 2009 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#

	# this file is included repeatedly from build/core/setup-abi.mk and is used
	# to setup the target toolchain for a given platform/abi combination.
	#

	$(call assert-defined,TARGET_PLATFORM TARGET_ARCH TARGET_ARCH_ABI)
	$(call assert-defined,NDK_APPS NDK_APP_STL)

	LLVM_VERSION_LIST := 2.6 2.7 2.8 2.9 3.0 3.1 3.2

	# Check that we have a toolchain that supports the current ABI.
	# NOTE: If NDK_TOOLCHAIN is defined, we're going to use it.
	#
	ifndef NDK_TOOLCHAIN
	TARGET_TOOLCHAIN_LIST := $(strip $(sort $(NDK_ABI.$(TARGET_ARCH_ABI).toolchains)))

	# Filter out the Clang toolchain, so that we can keep GCC as the default
	# toolchain.
	$(foreach _ver,$(LLVM_VERSION_LIST), \
	$(eval TARGET_TOOLCHAIN_LIST := \
	$(filter-out %-clang$(_ver),$(TARGET_TOOLCHAIN_LIST))))
	# Filter out 4.7 which is considered experimental at this moment
	TARGET_TOOLCHAIN_LIST := $(filter-out %4.7,$(TARGET_TOOLCHAIN_LIST))

	ifndef TARGET_TOOLCHAIN_LIST
	$(call __ndk_info,There is no toolchain that supports the $(TARGET_ARCH_ABI) ABI.)
	$(call __ndk_info,Please modify the APP_ABI definition in $(NDK_APP_APPLICATION_MK) to use)
	$(call __ndk_info,a set of the following values: $(NDK_ALL_ABIS))
	$(call __ndk_error,Aborting)
	endif
	# Select the last toolchain from the sorted list.
	# For now, this is enough to select armeabi-4.6 by default for ARM
	TARGET_TOOLCHAIN := $(lastword $(TARGET_TOOLCHAIN_LIST))

	# If NDK_TOOLCHAIN_VERSION is defined, we replace the toolchain version
	# suffix with it.
	#
	ifdef NDK_TOOLCHAIN_VERSION
	# Replace "clang" with the most recent verion
	ifeq ($(NDK_TOOLCHAIN_VERSION),clang)
	override NDK_TOOLCHAIN_VERSION := clang$(lastword $(LLVM_VERSION_LIST))
	endif
	# We assume the toolchain name uses dashes (-) as separators and doesn't
	# contain any space. The following is a bit subtle, but essentially
	# does the following:
	#
	# 1/ Use 'subst' to convert dashes into spaces, this generates a list
	# 2/ Use 'chop' to remove the last element of the list
	# 3/ Use 'subst' again to convert the spaces back into dashes
	#
	# So it TARGET_TOOLCHAIN is 'foo-bar-zoo-xxx', then
	# TARGET_TOOLCHAIN_BASE will be 'foo-bar-zoo'
	#
	TARGET_TOOLCHAIN_BASE := $(subst $(space),-,$(call chop,$(subst -,$(space),$(TARGET_TOOLCHAIN))))
	# if TARGET_TOOLCHAIN_BASE is llvm, remove clang from NDK_TOOLCHAIN_VERSION
	VERSION := $(NDK_TOOLCHAIN_VERSION)
	ifeq ($(TARGET_TOOLCHAIN_BASE),llvm)
	VERSION := $(subst clang,,$(NDK_TOOLCHAIN_VERSION))
	endif
	TARGET_TOOLCHAIN := $(TARGET_TOOLCHAIN_BASE)-$(VERSION)
	$(call ndk_log,Using target toolchain '$(TARGET_TOOLCHAIN)' for '$(TARGET_ARCH_ABI)' ABI (through NDK_TOOLCHAIN_VERSION))
	else
	$(call ndk_log,Using target toolchain '$(TARGET_TOOLCHAIN)' for '$(TARGET_ARCH_ABI)' ABI)
	endif
	else # NDK_TOOLCHAIN is not empty
	TARGET_TOOLCHAIN_LIST := $(strip $(filter $(NDK_TOOLCHAIN),$(NDK_ABI.$(TARGET_ARCH_ABI).toolchains)))
	ifndef TARGET_TOOLCHAIN_LIST
	$(call __ndk_info,The selected toolchain ($(NDK_TOOLCHAIN)) does not support the $(TARGET_ARCH_ABI) ABI.)
	$(call __ndk_info,Please modify the APP_ABI definition in $(NDK_APP_APPLICATION_MK) to use)
	$(call __ndk_info,a set of the following values: $(NDK_TOOLCHAIN.$(NDK_TOOLCHAIN).abis))
	$(call __ndk_info,Or change your NDK_TOOLCHAIN definition.)
	$(call __ndk_error,Aborting)
	endif
	TARGET_TOOLCHAIN := $(NDK_TOOLCHAIN)
	endif # NDK_TOOLCHAIN is not empty

	TARGET_ABI := $(TARGET_PLATFORM)-$(TARGET_ARCH_ABI)

	# setup sysroot variable.
	# SYSROOT_INC points to a directory that contains all public header
	# files for a given platform, and
	# SYSROOT_LIB points to libraries and object files used for linking
	# the generated target files properly.
	#
	SYSROOT_INC := $(NDK_PLATFORMS_ROOT)/$(TARGET_PLATFORM)/arch-$(TARGET_ARCH)
	SYSROOT_LINK := $(SYSROOT_INC)

	TARGET_PREBUILT_SHARED_LIBRARIES :=

	# Define default values for TOOLCHAIN_NAME, this can be overriden in
	# the setup file.
	TOOLCHAIN_NAME := $(TARGET_TOOLCHAIN)
	TOOLCHAIN_VERSION := $(call last,$(subst -,$(space),$(TARGET_TOOLCHAIN)))

	# Define the root path of the toolchain in the NDK tree.
	TOOLCHAIN_ROOT := $(NDK_ROOT)/toolchains/$(TOOLCHAIN_NAME)

	# Define the root path where toolchain prebuilts are stored
	TOOLCHAIN_PREBUILT_ROOT := $(call host-prebuilt-tag,$(TOOLCHAIN_ROOT))

	# Do the same for TOOLCHAIN_PREFIX. Note that we must chop the version
	# number from the toolchain name, e.g. arm-eabi-4.4.0 -> path/bin/arm-eabi-
	# to do that, we split at dashes, remove the last element, then merge the
	# result. Finally, add the complete path prefix.
	#
	TOOLCHAIN_PREFIX := $(call merge,-,$(call chop,$(call split,-,$(TOOLCHAIN_NAME))))-
	TOOLCHAIN_PREFIX := $(TOOLCHAIN_PREBUILT_ROOT)/bin/$(TOOLCHAIN_PREFIX)

	# We expect the gdbserver binary for this toolchain to be located at its root.
	TARGET_GDBSERVER := $(NDK_ROOT)/prebuilt/android-$(TARGET_ARCH)/gdbserver/gdbserver

	# compute NDK_APP_DST_DIR as the destination directory for the generated files
	NDK_APP_DST_DIR := $(NDK_APP_PROJECT_PATH)/libs/$(TARGET_ARCH_ABI)

	# Default build commands, can be overriden by the toolchain's setup script
	include $(BUILD_SYSTEM)/default-build-commands.mk

	# now call the toolchain-specific setup script
	include $(NDK_TOOLCHAIN.$(TARGET_TOOLCHAIN).setup)

	clean-installed-binaries::

	# Ensure that for debuggable applications, gdbserver will be copied to
	# the proper location

	NDK_APP_GDBSERVER := $(NDK_APP_DST_DIR)/gdbserver
	NDK_APP_GDBSETUP := $(NDK_APP_DST_DIR)/gdb.setup

	ifeq ($(NDK_APP_DEBUGGABLE),true)
	ifeq ($(TARGET_SONAME_EXTENSION),.so)

	installed_modules: $(NDK_APP_GDBSERVER)

	$(NDK_APP_GDBSERVER): PRIVATE_NAME := $(TOOLCHAIN_NAME)
	$(NDK_APP_GDBSERVER): PRIVATE_SRC := $(TARGET_GDBSERVER)
	$(NDK_APP_GDBSERVER): PRIVATE_DST := $(NDK_APP_GDBSERVER)

	$(call generate-file-dir,$(NDK_APP_GDBSERVER))

	$(NDK_APP_GDBSERVER): clean-installed-binaries
	@ $(HOST_ECHO) "Gdbserver : [$(PRIVATE_NAME)] $(call pretty-dir,$(PRIVATE_DST))"
	$(hide) $(call host-install,$(PRIVATE_SRC),$(PRIVATE_DST))

	installed_modules: $(NDK_APP_GDBSETUP)

	$(NDK_APP_GDBSETUP): PRIVATE_DST := $(NDK_APP_GDBSETUP)
	$(NDK_APP_GDBSETUP): PRIVATE_SOLIB_PATH := $(TARGET_OUT)
	$(NDK_APP_GDBSETUP): PRIVATE_SRC_DIRS := $(SYSROOT_INC)/usr/include

	$(NDK_APP_GDBSETUP):
	@ $(HOST_ECHO) "Gdbsetup : $(call pretty-dir,$(PRIVATE_DST))"
	$(hide) $(HOST_ECHO) "set solib-search-path $(call host-path,$(PRIVATE_SOLIB_PATH))" > $(PRIVATE_DST)
	$(hide) $(HOST_ECHO) "directory $(call host-path,$(call remove-duplicates,$(PRIVATE_SRC_DIRS)))" >> $(PRIVATE_DST)

	$(call generate-file-dir,$(NDK_APP_GDBSETUP))

	# This prevents parallel execution to clear gdb.setup after it has been written to
	$(NDK_APP_GDBSETUP): clean-installed-binaries
	endif
	endif

	# free the dictionary of LOCAL_MODULE definitions
	$(call modules-clear)

	$(call ndk-stl-select,$(NDK_APP_STL))

	# now parse the Android.mk for the application, this records all
	# module declarations, but does not populate the dependency graph yet.
	include $(NDK_APP_BUILD_SCRIPT)

	$(call ndk-stl-add-dependencies,$(NDK_APP_STL))

	# recompute all dependencies between modules
	$(call modules-compute-dependencies)

	# for debugging purpose
	ifdef NDK_DEBUG_MODULES
	$(call modules-dump-database)
	endif

	# now, really build the modules, the second pass allows one to deal
	# with exported values
	$(foreach __pass2_module,$(__ndk_modules),\
	$(eval LOCAL_MODULE := $(__pass2_module))\
	$(eval include $(BUILD_SYSTEM)/build-binary.mk)\
	)

	# Now compute the closure of all module dependencies.
	#
	# If APP_MODULES is not defined in the Application.mk, we
	# will build all modules that were listed from the top-level Android.mk
	# and the installable imported ones they depend on
	#
	ifeq ($(strip $(NDK_APP_MODULES)),)
	WANTED_MODULES := $(call modules-get-all-installable,$(modules-get-top-list))
	else
	WANTED_MODULES := $(call module-get-all-dependencies,$(NDK_APP_MODULES))
	endif

	WANTED_INSTALLED_MODULES += $(call map,module-get-installed,$(WANTED_MODULES))