build/tools/build-host-prebuilts.sh - platform/ndk - Git at Google

 #!/bin/sh
 #
 # Copyright (C) 2011 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #
 # Rebuild all host toolchains and programs
 #

 PROGDIR=$(dirname $0)
 . $PROGDIR/prebuilt-common.sh

 NDK_DIR=$ANDROID_NDK_ROOT
 register_var_option "--ndk-dir=<path>" NDK_DIR "NDK installation directory"

 SYSTEMS=$HOST_TAG
 # Replace x86_64 by x86 at the end of SYSTEMS since we will produce
 # 32-bit toolchains by default, i.e. unless you use the --try-64 flag
 if [ "${SYSTEMS%%x86_64}" != "$SYSTEMS" ]; then
     SYSTEMS=${SYSTEMS%%x86_64}x86
 fi
 # If we are on Linux, we are able to generate the Windows binaries
 # with the mingw32 cross-toolchain.
 if [ "$SYSTEMS" = "linux-x86" ]; then
     SYSTEMS=$SYSTEMS",windows"
     # If darwin toolchain exist, build darwin too
     if [ -f "${DARWIN_TOOLCHAIN}-gcc" ]; then
         SYSTEMS=$SYSTEMS",darwin-x86"
     fi
 fi
 CUSTOM_SYSTEMS=
 register_option "--systems=<names>" do_SYSTEMS "List of host systems to build for"
 do_SYSTEMS () { CUSTOM_SYSTEMS=true; SYSTEMS=$1; }

 ARCHS=$DEFAULT_ARCHS
 register_var_option "--arch=<list>" ARCHS "List of target archs to build for"

 PACKAGE_DIR=
 register_var_option "--package-dir=<path>" PACKAGE_DIR "Package toolchain into this directory"

 DARWIN_SSH=
 register_var_option "--darwin-ssh=<hostname>" DARWIN_SSH "Generate darwin packages on remote host"

 NO_GEN_PLATFORMS=
 register_var_option "--no-gen-platforms" NO_GEN_PLATFORMS "Don't generate platforms/ directory, use existing one"

 LLVM_VERSION_LIST=$DEFAULT_LLVM_VERSION_LIST
 register_var_option "--llvm-version-list=<vers>" LLVM_VERSION_LIST "List of LLVM release versions"

 CHECK_FLAG=
 do_check_option () { CHECK_FLAG="--check"; }
 register_option "--check" do_check_option "Check host prebuilts"

 register_try64_option

 PROGRAM_PARAMETERS="<toolchain-src-dir>"
 PROGRAM_DESCRIPTION=\
 "This script can be used to rebuild all the host NDK toolchains at once.
 You need to give it the path to the toolchain source directory, as
 downloaded by the 'download-toolchain-sources.sh' dev-script."

 extract_parameters "$@"

 # Check toolchain source path
 SRC_DIR="$PARAMETERS"
 if [ -z "$SRC_DIR" ]; then
     echo "ERROR: Please provide the path to the toolchain source tree. See --help"
     exit 1
 fi

 if [ ! -d "$SRC_DIR" ]; then
     echo "ERROR: Not a directory: '$SRC_DIR'"
     exit 1
 fi

 if [ ! -f "$SRC_DIR/build/configure" -o ! -d "$SRC_DIR/gcc/gcc-$DEFAULT_GCC_VERSION" ]; then
     echo "ERROR: The file $SRC_DIR/build/configure or"
     echo "       the directory $SRC_DIR/gcc/gcc-$DEFAULT_GCC_VERSION does not exist"
     echo "This is not the top of a toolchain tree: $SRC_DIR"
     echo "You must give the path to a copy of the toolchain source directories"
     echo "created by 'download-toolchain-sources.sh."
     exit 1
 fi

 # Now we can do the build
 BUILDTOOLS=$ANDROID_NDK_ROOT/build/tools

 if [ -z "$NO_GEN_PLATFORMS" ]; then
     echo "Preparing the build..."
     run $BUILDTOOLS/gen-platforms.sh --minimal --dst-dir=$NDK_DIR --ndk-dir=$NDK_DIR --arch=$(spaces_to_commas $ARCHS)
     fail_panic "Could not generate minimal sysroot!"
 else
     if [ ! -d "$NDK_DIR/platforms" ]; then
         echo "ERROR: --no-gen-platforms used but directory missing: $NDK_DIR/platforms"
         exit 1
     fi
 fi

 SYSTEMS=$(commas_to_spaces $SYSTEMS)
 ARCHS=$(commas_to_spaces $ARCHS)
 LLVM_VERSION_LIST=$(commas_to_spaces $LLVM_VERSION_LIST)

 if [ "$DARWIN_SSH" -a -z "$CUSTOM_SYSTEMS" ]; then
     SYSTEMS=" darwin-x86"
 fi

 FLAGS=
 if [ "$VERBOSE" = "yes" ]; then
     FLAGS=$FLAGS" --verbose"
 fi
 if [ "$VERBOSE2" = "yes" ]; then
     FLAGS=$FLAGS" --verbose"
 fi
 if [ "$TRY64" = "yes" ]; then
     FLAGS=$FLAGS" --try-64"
 else
     force_32bit_binaries
 fi
 if [ "$PACKAGE_DIR" ]; then
     mkdir -p "$PACKAGE_DIR"
     fail_panic "Could not create package directory: $PACKAGE_DIR"
     FLAGS=$FLAGS" --package-dir=$PACKAGE_DIR"
 fi

 do_remote_host_build ()
 {
     local SYSTEM="$1"
     local ARCH="$2"
     local REMOTE_HOST="$3"

     # 1/ Copy the NDK toolchain build scripts
     # 2/ Copy the toolchain sources/package
     # 3/ Ssh to unpack the build scripts, and run them
     # 4/ Copy back the generated prebuilt binaries
     #
     dump "Preparing remote build on $REMOTE_HOST..."

     # First try to create a remote temp directory on the remote host
     # Do it first so we can fail fast, not after spending time preparing
     # large tarballs.
     dump "Creating remote temp directory"
     TMPREMOTE=/tmp/ndk-$USER/darwin-prebuild
     run ssh $REMOTE_HOST "mkdir -p $TMPREMOTE && rm -rf $TMPREMOTE/*"
     fail_panic "Could not create temporary build directory on $REMOTE_HOST"

     # Now, package all the stuff we're going to send in a temporary
     # directory here on the machine, except toolchain sources
     TMPDARWIN=$NDK_TMPDIR/darwin  # Where we're going to package stuff
     log "Using temporary work directory: $TMPDARWIN"
     mkdir -p "$TMPDARWIN"
     dump "Prepare NDK build scripts"
     copy_directory "$ANDROID_NDK_ROOT/build" "$TMPDARWIN/ndk/build"
     copy_file_list "$ANDROID_NDK_ROOT" "$TMPDARWIN/ndk" sources/android/libthread_db
     copy_file_list "$ANDROID_NDK_ROOT" "$TMPDARWIN/ndk" "$STLPORT_SUBDIR"
     copy_file_list "$ANDROID_NDK_ROOT" "$TMPDARWIN/ndk" "$GABIXX_SUBDIR"
     copy_file_list "$ANDROID_NDK_ROOT" "$TMPDARWIN/ndk" sources/host-tools
     dump "Prepare platforms files"
     copy_directory "$NDK_DIR/platforms" "$TMPDARWIN/ndk/platforms"
     dump "Copying NDK build scripts and platform files to remote..."
     (cd "$TMPDARWIN" && tar czf - ndk) | (ssh $REMOTE_HOST tar xzf - -C $TMPREMOTE)
     fail_panic "Could not copy!"
     rm -rf $TMPDARWIN

     # Copy the toolchain sources
     dump "Copy toolchain sources to remote"
     ssh $REMOTE_HOST mkdir -p $TMPREMOTE/toolchain &&
     (cd "$SRC_DIR" && tar czf - .) | (ssh $REMOTE_HOST tar xzf - -C $TMPREMOTE/toolchain)
     fail_panic "Could not copy toolchain!"

     # Time to run the show :-)
     for ARCH in $(commas_to_spaces $ARCHS); do
         dump "Running remote $ARCH toolchain build..."
         SYSROOT=$TMPREMOTE/ndk/platforms/android-$(get_default_api_level_for_arch $ARCH)/arch-$ARCH
         run ssh $REMOTE_HOST "$TMPREMOTE/ndk/build/tools/build-host-prebuilts.sh $TMPREMOTE/toolchain --package-dir=$TMPREMOTE/packages --arch=$ARCH --ndk-dir=$TMPREMOTE/ndk --no-gen-platforms"
         fail_panic "Could not build prebuilt $ARCH toolchain on Darwin!"
     done
     # Get the results
     dump "Copying back Darwin prebuilt packages..."
     mkdir -p $TMPDARWIN/packages && rm -rf $TMPDARWIN/packages/*
     run scp $REMOTE_HOST:$TMPREMOTE/packages/*-darwin-* $TMPDARWIN/packages
     fail_panic "Could not grab Darwin packages!"

     for PACK in $TMPDARWIN/packages/*; do
         if [ "$PACKAGE_DIR" ]; then
             echo "Copying $(basename $PACK) to $PACKAGE_DIR..."
             cp $PACK $PACKAGE_DIR/
         else
             echo "Unpacking $(basename $PACK) into $NDK_DIR..."
             unpack_archive $PACK $NDK_DIR
         fi
         fail_panic ""
     done

     dump "Cleaning up remote machine..."
     run ssh $REMOTE_HOST rm -rf $TMPREMOTE
 }

 for SYSTEM in $SYSTEMS; do

     # Add --mingw/--darwin flag
     TOOLCHAIN_FLAGS=$FLAGS
     CANADIAN_BUILD=no
     if [ "$HOST_TAG32" = "linux-x86" ]; then
         case "$SYSTEM" in
             windows)
                 TOOLCHAIN_FLAGS=$TOOLCHAIN_FLAGS" --mingw"
                 CANADIAN_BUILD=yes
                 ;;
             darwin-x86)
                 TOOLCHAIN_FLAGS=$TOOLCHAIN_FLAGS" --darwin"
                 CANADIAN_BUILD=yes
                 ;;
         esac
     fi

     # Should we do a remote build?
     if [ "$SYSTEM" != "$HOST_TAG32" -a "$CANADIAN_BUILD" != "yes" ]; then
         case $SYSTEM in
             darwin-*)
                 if [ "$DARWIN_SSH" ]; then
                     do_remote_host_build "$SYSTEM" "$ARCH" "$DARWIN_SSH"
                 else
                     echo "WARNING: Can't build $SYSTEM binaries on this system!"
                     echo "Consider using the --darwin-ssh option."
                 fi
                 continue
         esac
     fi

     # Determin the display system name
     SYSNAME=$SYSTEM
     if [ "$TRY64" = "yes" ]; then
         case $SYSTEM in
             darwin-x86|linux-x86)
                 SYSNAME=${SYSTEM%%x86}x86_64
                 ;;
             windows)
                 SYSNAME=windows-x86_64
                 ;;
         esac
     fi

     # First, ndk-stack
     if [ "$TRY64" != "yes" ]; then
         # Don't build ndk-stack in 64-bit because unlike other host toolchains
         # ndk-stack doesn't have separate directories for 32-bit and 64-bit.
         # 64-bit one will overwrite the 32-bit one
         echo "Building $SYSNAME ndk-stack"
         run $BUILDTOOLS/build-ndk-stack.sh $TOOLCHAIN_FLAGS
         fail_panic "ndk-stack build failure!"
     fi
     echo "Building $SYSNAME ndk-make"
     run $BUILDTOOLS/build-host-make.sh $TOOLCHAIN_FLAGS
     fail_panic "make build failure!"

     echo "Building $SYSNAME ndk-awk"
     run $BUILDTOOLS/build-host-awk.sh $TOOLCHAIN_FLAGS
     fail_panic "awk build failure!"

     echo "Building $SYSNAME ndk-sed"
     run $BUILDTOOLS/build-host-sed.sh $TOOLCHAIN_FLAGS
     fail_panic "sed build failure!"

     # ToDo: perl in windows
     if [ "$SYSTEM" != "windows" ]; then
         echo "Building $SYSNAME ndk-perl"
         run $BUILDTOOLS/build-host-perl.sh $TOOLCHAIN_FLAGS "$SRC_DIR"
         fail_panic "perl build failure!"
     fi

     if [ "$SYSTEM" = "windows" ]; then
         echo "Building $SYSNAME toolbox"
         run $BUILDTOOLS/build-host-toolbox.sh $FLAGS
         fail_panic "Windows toolbox build failure!"
     fi

     # Then the toolchains
     for ARCH in $ARCHS; do
         TOOLCHAIN_NAMES=$(get_toolchain_name_list_for_arch $ARCH)
         if [ -z "$TOOLCHAIN_NAMES" ]; then
             echo "ERROR: Invalid architecture name: $ARCH"
             exit 1
         fi

         for TOOLCHAIN_NAME in $TOOLCHAIN_NAMES; do
             echo "Building $SYSNAME toolchain for $ARCH architecture: $TOOLCHAIN_NAME"
             run $BUILDTOOLS/build-gcc.sh "$SRC_DIR" "$NDK_DIR" $TOOLCHAIN_NAME $TOOLCHAIN_FLAGS
             fail_panic "Could not build $TOOLCHAIN_NAME-$SYSNAME!"
         done
     done

     # Build llvm and clang
     POLLY_FLAGS=
     if [ "$TRY64" != "yes" -a "$SYSTEM" != "windows" ]; then
         POLLY_FLAGS="--with-polly"
     fi
     for LLVM_VERSION in $LLVM_VERSION_LIST; do
         echo "Building $SYSNAME clang/llvm-$LLVM_VERSION"
         run $BUILDTOOLS/build-llvm.sh "$SRC_DIR" "$NDK_DIR" "llvm-$LLVM_VERSION" $TOOLCHAIN_FLAGS $POLLY_FLAGS $CHECK_FLAG
         fail_panic "Could not build llvm for $SYSNAME"
     done

     # Deploy ld.mcld
     $PROGDIR/deploy-host-mcld.sh --package-dir=$PACKAGE_DIR --systems=$SYSNAME
     fail_panic "Could not deploy ld.mcld for $SYSNAME"

     # We're done for this system
 done

 # Build tools common to all system
 run $BUILDTOOLS/build-analyzer.sh "$SRC_DIR" "$NDK_DIR" "llvm-$DEFAULT_LLVM_VERSION" --package-dir="$PACKAGE_DIR"

 if [ "$PACKAGE_DIR" ]; then
     echo "Done, please look at $PACKAGE_DIR"
 else
     echo "Done"
 fi

 exit 0
	#!/bin/sh
	#
	# Copyright (C) 2011 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#
	# Rebuild all host toolchains and programs
	#

	PROGDIR=$(dirname $0)
	. $PROGDIR/prebuilt-common.sh

	NDK_DIR=$ANDROID_NDK_ROOT
	register_var_option "--ndk-dir=<path>" NDK_DIR "NDK installation directory"

	SYSTEMS=$HOST_TAG
	# Replace x86_64 by x86 at the end of SYSTEMS since we will produce
	# 32-bit toolchains by default, i.e. unless you use the --try-64 flag
	if [ "${SYSTEMS%%x86_64}" != "$SYSTEMS" ]; then
	SYSTEMS=${SYSTEMS%%x86_64}x86
	fi
	# If we are on Linux, we are able to generate the Windows binaries
	# with the mingw32 cross-toolchain.
	if [ "$SYSTEMS" = "linux-x86" ]; then
	SYSTEMS=$SYSTEMS",windows"
	# If darwin toolchain exist, build darwin too
	if [ -f "${DARWIN_TOOLCHAIN}-gcc" ]; then
	SYSTEMS=$SYSTEMS",darwin-x86"
	fi
	fi
	CUSTOM_SYSTEMS=
	register_option "--systems=<names>" do_SYSTEMS "List of host systems to build for"
	do_SYSTEMS () { CUSTOM_SYSTEMS=true; SYSTEMS=$1; }

	ARCHS=$DEFAULT_ARCHS
	register_var_option "--arch=<list>" ARCHS "List of target archs to build for"

	PACKAGE_DIR=
	register_var_option "--package-dir=<path>" PACKAGE_DIR "Package toolchain into this directory"

	DARWIN_SSH=
	register_var_option "--darwin-ssh=<hostname>" DARWIN_SSH "Generate darwin packages on remote host"

	NO_GEN_PLATFORMS=
	register_var_option "--no-gen-platforms" NO_GEN_PLATFORMS "Don't generate platforms/ directory, use existing one"

	LLVM_VERSION_LIST=$DEFAULT_LLVM_VERSION_LIST
	register_var_option "--llvm-version-list=<vers>" LLVM_VERSION_LIST "List of LLVM release versions"

	CHECK_FLAG=
	do_check_option () { CHECK_FLAG="--check"; }
	register_option "--check" do_check_option "Check host prebuilts"

	register_try64_option

	PROGRAM_PARAMETERS="<toolchain-src-dir>"
	PROGRAM_DESCRIPTION=\
	"This script can be used to rebuild all the host NDK toolchains at once.
	You need to give it the path to the toolchain source directory, as
	downloaded by the 'download-toolchain-sources.sh' dev-script."

	extract_parameters "$@"

	# Check toolchain source path
	SRC_DIR="$PARAMETERS"
	if [ -z "$SRC_DIR" ]; then
	echo "ERROR: Please provide the path to the toolchain source tree. See --help"
	exit 1
	fi

	if [ ! -d "$SRC_DIR" ]; then
	echo "ERROR: Not a directory: '$SRC_DIR'"
	exit 1
	fi

	if [ ! -f "$SRC_DIR/build/configure" -o ! -d "$SRC_DIR/gcc/gcc-$DEFAULT_GCC_VERSION" ]; then
	echo "ERROR: The file $SRC_DIR/build/configure or"
	echo " the directory $SRC_DIR/gcc/gcc-$DEFAULT_GCC_VERSION does not exist"
	echo "This is not the top of a toolchain tree: $SRC_DIR"
	echo "You must give the path to a copy of the toolchain source directories"
	echo "created by 'download-toolchain-sources.sh."
	exit 1
	fi

	# Now we can do the build
	BUILDTOOLS=$ANDROID_NDK_ROOT/build/tools

	if [ -z "$NO_GEN_PLATFORMS" ]; then
	echo "Preparing the build..."
	run $BUILDTOOLS/gen-platforms.sh --minimal --dst-dir=$NDK_DIR --ndk-dir=$NDK_DIR --arch=$(spaces_to_commas $ARCHS)
	fail_panic "Could not generate minimal sysroot!"
	else
	if [ ! -d "$NDK_DIR/platforms" ]; then
	echo "ERROR: --no-gen-platforms used but directory missing: $NDK_DIR/platforms"
	exit 1
	fi
	fi

	SYSTEMS=$(commas_to_spaces $SYSTEMS)
	ARCHS=$(commas_to_spaces $ARCHS)
	LLVM_VERSION_LIST=$(commas_to_spaces $LLVM_VERSION_LIST)

	if [ "$DARWIN_SSH" -a -z "$CUSTOM_SYSTEMS" ]; then
	SYSTEMS=" darwin-x86"
	fi

	FLAGS=
	if [ "$VERBOSE" = "yes" ]; then
	FLAGS=$FLAGS" --verbose"
	fi
	if [ "$VERBOSE2" = "yes" ]; then
	FLAGS=$FLAGS" --verbose"
	fi
	if [ "$TRY64" = "yes" ]; then
	FLAGS=$FLAGS" --try-64"
	else
	force_32bit_binaries
	fi
	if [ "$PACKAGE_DIR" ]; then
	mkdir -p "$PACKAGE_DIR"
	fail_panic "Could not create package directory: $PACKAGE_DIR"
	FLAGS=$FLAGS" --package-dir=$PACKAGE_DIR"
	fi

	do_remote_host_build ()
	{
	local SYSTEM="$1"
	local ARCH="$2"
	local REMOTE_HOST="$3"

	# 1/ Copy the NDK toolchain build scripts
	# 2/ Copy the toolchain sources/package
	# 3/ Ssh to unpack the build scripts, and run them
	# 4/ Copy back the generated prebuilt binaries
	#
	dump "Preparing remote build on $REMOTE_HOST..."

	# First try to create a remote temp directory on the remote host
	# Do it first so we can fail fast, not after spending time preparing
	# large tarballs.
	dump "Creating remote temp directory"
	TMPREMOTE=/tmp/ndk-$USER/darwin-prebuild
	run ssh $REMOTE_HOST "mkdir -p $TMPREMOTE && rm -rf $TMPREMOTE/*"
	fail_panic "Could not create temporary build directory on $REMOTE_HOST"

	# Now, package all the stuff we're going to send in a temporary
	# directory here on the machine, except toolchain sources
	TMPDARWIN=$NDK_TMPDIR/darwin # Where we're going to package stuff
	log "Using temporary work directory: $TMPDARWIN"
	mkdir -p "$TMPDARWIN"
	dump "Prepare NDK build scripts"
	copy_directory "$ANDROID_NDK_ROOT/build" "$TMPDARWIN/ndk/build"
	copy_file_list "$ANDROID_NDK_ROOT" "$TMPDARWIN/ndk" sources/android/libthread_db
	copy_file_list "$ANDROID_NDK_ROOT" "$TMPDARWIN/ndk" "$STLPORT_SUBDIR"
	copy_file_list "$ANDROID_NDK_ROOT" "$TMPDARWIN/ndk" "$GABIXX_SUBDIR"
	copy_file_list "$ANDROID_NDK_ROOT" "$TMPDARWIN/ndk" sources/host-tools
	dump "Prepare platforms files"
	copy_directory "$NDK_DIR/platforms" "$TMPDARWIN/ndk/platforms"
	dump "Copying NDK build scripts and platform files to remote..."
	(cd "$TMPDARWIN" && tar czf - ndk) \| (ssh $REMOTE_HOST tar xzf - -C $TMPREMOTE)
	fail_panic "Could not copy!"
	rm -rf $TMPDARWIN

	# Copy the toolchain sources
	dump "Copy toolchain sources to remote"
	ssh $REMOTE_HOST mkdir -p $TMPREMOTE/toolchain &&
	(cd "$SRC_DIR" && tar czf - .) \| (ssh $REMOTE_HOST tar xzf - -C $TMPREMOTE/toolchain)
	fail_panic "Could not copy toolchain!"

	# Time to run the show :-)
	for ARCH in $(commas_to_spaces $ARCHS); do
	dump "Running remote $ARCH toolchain build..."
	SYSROOT=$TMPREMOTE/ndk/platforms/android-$(get_default_api_level_for_arch $ARCH)/arch-$ARCH
	run ssh $REMOTE_HOST "$TMPREMOTE/ndk/build/tools/build-host-prebuilts.sh $TMPREMOTE/toolchain --package-dir=$TMPREMOTE/packages --arch=$ARCH --ndk-dir=$TMPREMOTE/ndk --no-gen-platforms"
	fail_panic "Could not build prebuilt $ARCH toolchain on Darwin!"
	done
	# Get the results
	dump "Copying back Darwin prebuilt packages..."
	mkdir -p $TMPDARWIN/packages && rm -rf $TMPDARWIN/packages/*
	run scp $REMOTE_HOST:$TMPREMOTE/packages/-darwin- $TMPDARWIN/packages
	fail_panic "Could not grab Darwin packages!"

	for PACK in $TMPDARWIN/packages/*; do
	if [ "$PACKAGE_DIR" ]; then
	echo "Copying $(basename $PACK) to $PACKAGE_DIR..."
	cp $PACK $PACKAGE_DIR/
	else
	echo "Unpacking $(basename $PACK) into $NDK_DIR..."
	unpack_archive $PACK $NDK_DIR
	fi
	fail_panic ""
	done

	dump "Cleaning up remote machine..."
	run ssh $REMOTE_HOST rm -rf $TMPREMOTE
	}

	for SYSTEM in $SYSTEMS; do

	# Add --mingw/--darwin flag
	TOOLCHAIN_FLAGS=$FLAGS
	CANADIAN_BUILD=no
	if [ "$HOST_TAG32" = "linux-x86" ]; then
	case "$SYSTEM" in
	windows)
	TOOLCHAIN_FLAGS=$TOOLCHAIN_FLAGS" --mingw"
	CANADIAN_BUILD=yes
	;;
	darwin-x86)
	TOOLCHAIN_FLAGS=$TOOLCHAIN_FLAGS" --darwin"
	CANADIAN_BUILD=yes
	;;
	esac
	fi

	# Should we do a remote build?
	if [ "$SYSTEM" != "$HOST_TAG32" -a "$CANADIAN_BUILD" != "yes" ]; then
	case $SYSTEM in
	darwin-*)
	if [ "$DARWIN_SSH" ]; then
	do_remote_host_build "$SYSTEM" "$ARCH" "$DARWIN_SSH"
	else
	echo "WARNING: Can't build $SYSTEM binaries on this system!"
	echo "Consider using the --darwin-ssh option."
	fi
	continue
	esac
	fi

	# Determin the display system name
	SYSNAME=$SYSTEM
	if [ "$TRY64" = "yes" ]; then
	case $SYSTEM in
	darwin-x86\|linux-x86)
	SYSNAME=${SYSTEM%%x86}x86_64
	;;
	windows)
	SYSNAME=windows-x86_64
	;;
	esac
	fi

	# First, ndk-stack
	if [ "$TRY64" != "yes" ]; then
	# Don't build ndk-stack in 64-bit because unlike other host toolchains
	# ndk-stack doesn't have separate directories for 32-bit and 64-bit.
	# 64-bit one will overwrite the 32-bit one
	echo "Building $SYSNAME ndk-stack"
	run $BUILDTOOLS/build-ndk-stack.sh $TOOLCHAIN_FLAGS
	fail_panic "ndk-stack build failure!"
	fi
	echo "Building $SYSNAME ndk-make"
	run $BUILDTOOLS/build-host-make.sh $TOOLCHAIN_FLAGS
	fail_panic "make build failure!"

	echo "Building $SYSNAME ndk-awk"
	run $BUILDTOOLS/build-host-awk.sh $TOOLCHAIN_FLAGS
	fail_panic "awk build failure!"

	echo "Building $SYSNAME ndk-sed"
	run $BUILDTOOLS/build-host-sed.sh $TOOLCHAIN_FLAGS
	fail_panic "sed build failure!"

	# ToDo: perl in windows
	if [ "$SYSTEM" != "windows" ]; then
	echo "Building $SYSNAME ndk-perl"
	run $BUILDTOOLS/build-host-perl.sh $TOOLCHAIN_FLAGS "$SRC_DIR"
	fail_panic "perl build failure!"
	fi

	if [ "$SYSTEM" = "windows" ]; then
	echo "Building $SYSNAME toolbox"
	run $BUILDTOOLS/build-host-toolbox.sh $FLAGS
	fail_panic "Windows toolbox build failure!"
	fi

	# Then the toolchains
	for ARCH in $ARCHS; do
	TOOLCHAIN_NAMES=$(get_toolchain_name_list_for_arch $ARCH)
	if [ -z "$TOOLCHAIN_NAMES" ]; then
	echo "ERROR: Invalid architecture name: $ARCH"
	exit 1
	fi

	for TOOLCHAIN_NAME in $TOOLCHAIN_NAMES; do
	echo "Building $SYSNAME toolchain for $ARCH architecture: $TOOLCHAIN_NAME"
	run $BUILDTOOLS/build-gcc.sh "$SRC_DIR" "$NDK_DIR" $TOOLCHAIN_NAME $TOOLCHAIN_FLAGS
	fail_panic "Could not build $TOOLCHAIN_NAME-$SYSNAME!"
	done
	done

	# Build llvm and clang
	POLLY_FLAGS=
	if [ "$TRY64" != "yes" -a "$SYSTEM" != "windows" ]; then
	POLLY_FLAGS="--with-polly"
	fi
	for LLVM_VERSION in $LLVM_VERSION_LIST; do
	echo "Building $SYSNAME clang/llvm-$LLVM_VERSION"
	run $BUILDTOOLS/build-llvm.sh "$SRC_DIR" "$NDK_DIR" "llvm-$LLVM_VERSION" $TOOLCHAIN_FLAGS $POLLY_FLAGS $CHECK_FLAG
	fail_panic "Could not build llvm for $SYSNAME"
	done

	# Deploy ld.mcld
	$PROGDIR/deploy-host-mcld.sh --package-dir=$PACKAGE_DIR --systems=$SYSNAME
	fail_panic "Could not deploy ld.mcld for $SYSNAME"

	# We're done for this system
	done

	# Build tools common to all system
	run $BUILDTOOLS/build-analyzer.sh "$SRC_DIR" "$NDK_DIR" "llvm-$DEFAULT_LLVM_VERSION" --package-dir="$PACKAGE_DIR"

	if [ "$PACKAGE_DIR" ]; then
	echo "Done, please look at $PACKAGE_DIR"
	else
	echo "Done"
	fi

	exit 0