blob: 228e2d1846ef5ee57d8d1b0eca3ca6b35d1b0974 [file] [log] [blame]
/*
* Copyright (C) 2011 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.android.camera;
import com.android.camera.ui.FaceView;
import com.android.camera.ui.FocusIndicator;
import com.android.camera.ui.FocusIndicatorView;
import android.content.res.AssetFileDescriptor;
import android.graphics.Rect;
import android.hardware.Camera.Area;
import android.hardware.Camera.Parameters;
import android.os.Handler;
import android.os.Message;
import android.util.Log;
import android.view.MotionEvent;
import android.view.View;
import android.view.ViewGroup;
import android.widget.RelativeLayout;
import java.util.ArrayList;
import java.util.List;
// A class that handles everything about focus in still picture mode.
// This also handles the metering area because it is the same as focus area.
public class FocusManager {
private static final String TAG = "FocusManager";
private static final int RESET_TOUCH_FOCUS = 0;
private static final int FOCUS_BEEP_VOLUME = 100;
private static final int RESET_TOUCH_FOCUS_DELAY = 3000;
private int mState = STATE_IDLE;
private static final int STATE_IDLE = 0; // Focus is not active.
private static final int STATE_FOCUSING = 1; // Focus is in progress.
// Focus is in progress and the camera should take a picture after focus finishes.
private static final int STATE_FOCUSING_SNAP_ON_FINISH = 2;
private static final int STATE_SUCCESS = 3; // Focus finishes and succeeds.
private static final int STATE_FAIL = 4; // Focus finishes and fails.
private boolean mInitialized;
private boolean mFocusAreaSupported;
private boolean mInLongPress;
private boolean mLockAeAwbNeeded;
private boolean mAeAwbLock;
private SoundPlayer mSoundPlayer;
private View mFocusIndicatorRotateLayout;
private FocusIndicatorView mFocusIndicator;
private View mPreviewFrame;
private FaceView mFaceView;
private List<Area> mFocusArea; // focus area in driver format
private List<Area> mMeteringArea; // metering area in driver format
private String mFocusMode;
private String mDefaultFocusMode;
private String mOverrideFocusMode;
private Parameters mParameters;
private ComboPreferences mPreferences;
private Handler mHandler;
Listener mListener;
public interface Listener {
public void autoFocus();
public void cancelAutoFocus();
public boolean capture();
public void startFaceDetection();
public void stopFaceDetection();
public void setFocusParameters();
}
private class MainHandler extends Handler {
@Override
public void handleMessage(Message msg) {
switch (msg.what) {
case RESET_TOUCH_FOCUS: {
cancelAutoFocus();
mListener.startFaceDetection();
break;
}
}
}
}
public FocusManager(ComboPreferences preferences, String defaultFocusMode) {
mPreferences = preferences;
mDefaultFocusMode = defaultFocusMode;
mHandler = new MainHandler();
}
// This has to be initialized before initialize().
public void initializeParameters(Parameters parameters) {
mParameters = parameters;
mFocusAreaSupported = (mParameters.getMaxNumFocusAreas() > 0
&& isSupported(Parameters.FOCUS_MODE_AUTO,
mParameters.getSupportedFocusModes()));
mLockAeAwbNeeded = (mParameters.isAutoExposureLockSupported() ||
mParameters.isAutoWhiteBalanceLockSupported());
}
public void initialize(View focusIndicatorRotate, View previewFrame,
FaceView faceView, Listener listener) {
mFocusIndicatorRotateLayout = focusIndicatorRotate;
mFocusIndicator = (FocusIndicatorView) focusIndicatorRotate.findViewById(
R.id.focus_indicator);
mPreviewFrame = previewFrame;
mFaceView = faceView;
mListener = listener;
if (mParameters != null) {
mInitialized = true;
} else {
Log.e(TAG, "mParameters is not initialized.");
}
}
public void onShutterDown() {
if (!mInitialized) return;
// Lock AE and AWB so users can half-press shutter and recompose.
if (mLockAeAwbNeeded && !mAeAwbLock) {
mAeAwbLock = true;
mListener.setFocusParameters();
}
if (needAutoFocusCall()) {
// Do not focus if touch focus has been triggered.
if (mState != STATE_SUCCESS && mState != STATE_FAIL) {
autoFocus();
}
}
}
public void onShutterUp() {
if (!mInitialized) return;
if (needAutoFocusCall()) {
// User releases half-pressed focus key.
if (mState == STATE_FOCUSING || mState == STATE_SUCCESS
|| mState == STATE_FAIL) {
cancelAutoFocus();
}
}
// Unlock AE and AWB after cancelAutoFocus. Camera API does not
// guarantee setParameters can be called during autofocus.
if (mLockAeAwbNeeded && mAeAwbLock && (mState != STATE_FOCUSING_SNAP_ON_FINISH)) {
mAeAwbLock = false;
mListener.setFocusParameters();
}
}
public void shutterLongPressed() {
if (Parameters.FOCUS_MODE_CONTINUOUS_PICTURE.equals(mFocusMode)
&& isSupported(Parameters.FOCUS_MODE_AUTO, mParameters.getSupportedFocusModes())) {
if (mState == STATE_IDLE || mState == STATE_FOCUSING_SNAP_ON_FINISH) {
Log.e(TAG, "Invalid focus state=" + mState);
}
mInLongPress = true;
// Cancel any outstanding Auto focus requests. The auto focus mode
// will be changed from CAF to auto in cancelAutoFocus.
onShutterUp();
// Call Autofocus
onShutterDown();
mInLongPress = false;
}
}
public void doSnap() {
if (!mInitialized) return;
// If the user has half-pressed the shutter and focus is completed, we
// can take the photo right away. If the focus mode is infinity, we can
// also take the photo.
if (!needAutoFocusCall() || (mState == STATE_SUCCESS || mState == STATE_FAIL)) {
capture();
} else if (mState == STATE_FOCUSING) {
// Half pressing the shutter (i.e. the focus button event) will
// already have requested AF for us, so just request capture on
// focus here.
mState = STATE_FOCUSING_SNAP_ON_FINISH;
} else if (mState == STATE_IDLE) {
// We didn't do focus. This can happen if the user press focus key
// while the snapshot is still in progress. The user probably wants
// the next snapshot as soon as possible, so we just do a snapshot
// without focusing again.
capture();
}
}
public void onShutter() {
resetTouchFocus();
updateFocusUI();
}
public void onAutoFocus(boolean focused) {
if (mState == STATE_FOCUSING_SNAP_ON_FINISH) {
// Take the picture no matter focus succeeds or fails. No need
// to play the AF sound if we're about to play the shutter
// sound.
if (focused) {
mState = STATE_SUCCESS;
} else {
mState = STATE_FAIL;
}
updateFocusUI();
capture();
} else if (mState == STATE_FOCUSING) {
// This happens when (1) user is half-pressing the focus key or
// (2) touch focus is triggered. Play the focus tone. Do not
// take the picture now.
if (focused) {
mState = STATE_SUCCESS;
// Do not play the sound in continuous autofocus mode. It does
// not do a full scan. The focus callback arrives before doSnap
// so the state is always STATE_FOCUSING.
if (!Parameters.FOCUS_MODE_CONTINUOUS_PICTURE.equals(mFocusMode)
&& mSoundPlayer != null) {
mSoundPlayer.play();
}
} else {
mState = STATE_FAIL;
}
updateFocusUI();
// If this is triggered by touch focus, cancel focus after a
// while.
if (mFocusArea != null) {
mHandler.sendEmptyMessageDelayed(RESET_TOUCH_FOCUS, RESET_TOUCH_FOCUS_DELAY);
}
} else if (mState == STATE_IDLE) {
// User has released the focus key before focus completes.
// Do nothing.
}
}
public boolean onTouch(MotionEvent e) {
if (!mInitialized || mState == STATE_FOCUSING_SNAP_ON_FINISH) return false;
// Let users be able to cancel previous touch focus.
if ((mFocusArea != null) && (mState == STATE_FOCUSING ||
mState == STATE_SUCCESS || mState == STATE_FAIL)) {
cancelAutoFocus();
}
// Initialize variables.
int x = Math.round(e.getX());
int y = Math.round(e.getY());
int focusWidth = mFocusIndicatorRotateLayout.getWidth();
int focusHeight = mFocusIndicatorRotateLayout.getHeight();
int previewWidth = mPreviewFrame.getWidth();
int previewHeight = mPreviewFrame.getHeight();
if (mFocusArea == null) {
mFocusArea = new ArrayList<Area>();
mFocusArea.add(new Area(new Rect(), 1));
mMeteringArea = new ArrayList<Area>();
mMeteringArea.add(new Area(new Rect(), 1));
}
// Convert the coordinates to driver format.
// AE area is bigger because exposure is sensitive and
// easy to over- or underexposure if area is too small.
calculateTapArea(focusWidth, focusHeight, 1, x, y, previewWidth, previewHeight,
mFocusArea.get(0).rect);
calculateTapArea(focusWidth, focusHeight, 1.5, x, y, previewWidth, previewHeight,
mMeteringArea.get(0).rect);
// Use margin to set the focus indicator to the touched area.
RelativeLayout.LayoutParams p =
(RelativeLayout.LayoutParams) mFocusIndicatorRotateLayout.getLayoutParams();
int left = Util.clamp(x - focusWidth / 2, 0, previewWidth - focusWidth);
int top = Util.clamp(y - focusHeight / 2, 0, previewHeight - focusHeight);
p.setMargins(left, top, 0, 0);
// Disable "center" rule because we no longer want to put it in the center.
int[] rules = p.getRules();
rules[RelativeLayout.CENTER_IN_PARENT] = 0;
mFocusIndicatorRotateLayout.requestLayout();
// Stop face detection because we want to specify focus and metering area.
mListener.stopFaceDetection();
// Set the focus area and metering area.
mListener.setFocusParameters();
if (mFocusAreaSupported && (e.getAction() == MotionEvent.ACTION_UP)) {
autoFocus();
} else { // Just show the indicator in all other cases.
updateFocusUI();
// Reset the metering area in 3 seconds.
mHandler.removeMessages(RESET_TOUCH_FOCUS);
mHandler.sendEmptyMessageDelayed(RESET_TOUCH_FOCUS, RESET_TOUCH_FOCUS_DELAY);
}
return true;
}
public void onPreviewStarted() {
mState = STATE_IDLE;
}
public void onPreviewStopped() {
mState = STATE_IDLE;
resetTouchFocus();
// If auto focus was in progress, it would have been canceled.
updateFocusUI();
}
public void onCameraReleased() {
onPreviewStopped();
}
private void autoFocus() {
Log.v(TAG, "Start autofocus.");
mListener.autoFocus();
mState = STATE_FOCUSING;
// Pause the face view because the driver will keep sending face
// callbacks after the focus completes.
if (mFaceView != null) mFaceView.pause();
updateFocusUI();
mHandler.removeMessages(RESET_TOUCH_FOCUS);
}
private void cancelAutoFocus() {
Log.v(TAG, "Cancel autofocus.");
// Reset the tap area before calling mListener.cancelAutofocus.
// Otherwise, focus mode stays at auto and the tap area passed to the
// driver is not reset.
resetTouchFocus();
mListener.cancelAutoFocus();
if (mFaceView != null) mFaceView.resume();
mState = STATE_IDLE;
updateFocusUI();
mHandler.removeMessages(RESET_TOUCH_FOCUS);
}
private void capture() {
if (mListener.capture()) {
mState = STATE_IDLE;
mHandler.removeMessages(RESET_TOUCH_FOCUS);
}
}
public void initializeSoundPlayer(AssetFileDescriptor fd) {
mSoundPlayer = new SoundPlayer(fd);
}
public void releaseSoundPlayer() {
if (mSoundPlayer != null) {
mSoundPlayer.release();
mSoundPlayer = null;
}
}
// This can only be called after mParameters is initialized.
public String getFocusMode() {
if (mOverrideFocusMode != null) return mOverrideFocusMode;
if (mInLongPress) {
// Users long-press the shutter button in CAF. Change it to auto
// mode, so it will do a full scan.
mFocusMode = Parameters.FOCUS_MODE_AUTO;
} else if (mFocusAreaSupported && mFocusArea != null) {
// Always use autofocus in tap-to-focus.
mFocusMode = Parameters.FOCUS_MODE_AUTO;
} else {
// The default is continuous autofocus.
mFocusMode = mPreferences.getString(
CameraSettings.KEY_FOCUS_MODE, mDefaultFocusMode);
}
if (!isSupported(mFocusMode, mParameters.getSupportedFocusModes())) {
// For some reasons, the driver does not support the current
// focus mode. Fall back to auto.
if (isSupported(Parameters.FOCUS_MODE_AUTO,
mParameters.getSupportedFocusModes())) {
mFocusMode = Parameters.FOCUS_MODE_AUTO;
} else {
mFocusMode = mParameters.getFocusMode();
}
}
return mFocusMode;
}
public List<Area> getFocusAreas() {
return mFocusArea;
}
public List<Area> getMeteringAreas() {
return mMeteringArea;
}
public void updateFocusUI() {
if (!mInitialized) return;
// Set the length of focus indicator according to preview frame size.
int len = Math.min(mPreviewFrame.getWidth(), mPreviewFrame.getHeight()) / 4;
ViewGroup.LayoutParams layout = mFocusIndicator.getLayoutParams();
layout.width = len;
layout.height = len;
// Show only focus indicator or face indicator.
boolean faceExists = (mFaceView != null && mFaceView.faceExists());
FocusIndicator focusIndicator = (faceExists) ? mFaceView : mFocusIndicator;
if (mState == STATE_IDLE) {
if (mFocusArea == null) {
focusIndicator.clear();
} else {
// Users touch on the preview and the indicator represents the
// metering area. Either focus area is not supported or
// autoFocus call is not required.
focusIndicator.showStart();
}
} else if (mState == STATE_FOCUSING || mState == STATE_FOCUSING_SNAP_ON_FINISH) {
focusIndicator.showStart();
} else {
// In CAF, do not show success or failure because it only returns
// the focus status. It does not do a full scan. So the result is
// failure most of the time.
if (Parameters.FOCUS_MODE_CONTINUOUS_PICTURE.equals(mFocusMode)) {
focusIndicator.showStart();
} else if (mState == STATE_SUCCESS) {
focusIndicator.showSuccess();
} else if (mState == STATE_FAIL) {
focusIndicator.showFail();
}
}
}
public void resetTouchFocus() {
if (!mInitialized) return;
// Put focus indicator to the center.
RelativeLayout.LayoutParams p =
(RelativeLayout.LayoutParams) mFocusIndicatorRotateLayout.getLayoutParams();
int[] rules = p.getRules();
rules[RelativeLayout.CENTER_IN_PARENT] = RelativeLayout.TRUE;
p.setMargins(0, 0, 0, 0);
mFocusArea = null;
mMeteringArea = null;
}
public void calculateTapArea(int focusWidth, int focusHeight, double areaMultiple,
int x, int y, int previewWidth, int previewHeight, Rect rect) {
int areaWidth = (int)(focusWidth * areaMultiple);
int areaHeight = (int)(focusHeight * areaMultiple);
int areaLeft = Util.clamp(x - areaWidth / 2, 0, previewWidth - areaWidth);
int areaTop = Util.clamp(y - areaHeight / 2, 0, previewHeight - areaHeight);
convertToFocusArea(areaLeft, areaTop, areaWidth, areaHeight, previewWidth, previewHeight,
rect);
}
// Convert the touch point to the focus area in driver format.
public static void convertToFocusArea(int left, int top, int focusWidth, int focusHeight,
int previewWidth, int previewHeight, Rect rect) {
rect.left = Math.round((float) left / previewWidth * 2000 - 1000);
rect.top = Math.round((float) top / previewHeight * 2000 - 1000);
rect.right = Math.round((float) (left + focusWidth) / previewWidth * 2000 - 1000);
rect.bottom = Math.round((float) (top + focusHeight) / previewHeight * 2000 - 1000);
}
public boolean isFocusCompleted() {
return mState == STATE_SUCCESS || mState == STATE_FAIL;
}
public void removeMessages() {
mHandler.removeMessages(RESET_TOUCH_FOCUS);
}
public void overrideFocusMode(String focusMode) {
mOverrideFocusMode = focusMode;
}
public void setAeAwbLock(boolean lock) {
mAeAwbLock = lock;
}
public boolean getAeAwbLock() {
return mAeAwbLock;
}
private static boolean isSupported(String value, List<String> supported) {
return supported == null ? false : supported.indexOf(value) >= 0;
}
private boolean needAutoFocusCall() {
String focusMode = getFocusMode();
return !(focusMode.equals(Parameters.FOCUS_MODE_INFINITY)
|| focusMode.equals(Parameters.FOCUS_MODE_FIXED)
|| focusMode.equals(Parameters.FOCUS_MODE_EDOF));
}
}