| [General] |
| |
| # List of plugins that should not be loaded on bluetoothd startup |
| #DisablePlugins = network,input |
| |
| # Default adaper name |
| # %h - substituted for hostname |
| # %d - substituted for adapter id |
| # %b - substituted for ro.product.brand |
| # %m - substituted for ro.product.model |
| # %n - substituted for ro.product.name |
| Name = %m |
| |
| # Default device class. Only the major and minor device class bits are |
| # considered. |
| # Local device class |
| # 0x400000 - Service class: Telephony |
| # 0x000200 - Major class: Phone |
| # 0x00000C - Minor class: Smart phone |
| Class = 0x40020C |
| |
| # How long to stay in discoverable mode before going back to non-discoverable |
| # The value is in seconds. Default is 180, i.e. 3 minutes. |
| # 0 = disable timer, i.e. stay discoverable forever |
| DiscoverableTimeout = 120 |
| |
| # How long to stay in pairable mode before going back to non-discoverable |
| # The value is in seconds. Default is 0. |
| # 0 = disable timer, i.e. stay pairable forever |
| PairableTimeout = 0 |
| |
| # Use some other page timeout than the controller default one |
| # which is 16384 (10 seconds). |
| PageTimeout = 8192 |
| |
| # Discover scheduler interval used in Adapter.DiscoverDevices |
| # The value is in seconds. Defaults is 0 to use controller scheduler. |
| DiscoverSchedulerInterval = 0 |
| |
| # What value should be assumed for the adapter Powered property when |
| # SetProperty(Powered, ...) hasn't been called yet. Defaults to true |
| InitiallyPowered = true |
| |
| # Remember the previously stored Powered state when initializing adapters |
| RememberPowered = true |
| |
| # Use vendor, product and version information for DID profile support. |
| # The values are separated by ":" and VID, PID and version. |
| DeviceID = android:generic:1.5 |
| |
| # Do reverse service discovery for previously unknown devices that connect to |
| # us. This option is really only needed for qualification since the BITE tester |
| # doesn't like us doing reverse SDP for some test cases (though there could in |
| # theory be other useful purposes for this too). Defaults to true. |
| ReverseServiceDiscovery = true |
| |
| # Enable name resolving after inquiry. Set it to 'false' if you don't need |
| # remote devices name and want shorter discovery cycle. Defaults to 'true'. |
| NameResolving = true |
| |
| # The link policy for connections. By default it's set to 15(0x000f) which is |
| # a bitwise OR of role switch(0x0001), hold mode(0x0002), sniff mode(0x0004) |
| # and park state(0x0008) are all enabled. However, some devices have |
| # connection stability issue or fail to setup SCO when the link is in park |
| # state, which requires park state bit cleared. |
| DefaultLinkPolicy = 7 |
