| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "bluedroid" |
| |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <stdlib.h> |
| #include <sys/ioctl.h> |
| #include <sys/socket.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| |
| #include <cutils/log.h> |
| #include <cutils/properties.h> |
| |
| #include <bluetooth/bluetooth.h> |
| #include <bluetooth/hci.h> |
| #include <bluetooth/hci_lib.h> |
| |
| #include <bluedroid/bluetooth.h> |
| |
| #ifndef HCI_DEV_ID |
| #define HCI_DEV_ID 0 |
| #endif |
| |
| #define HCID_STOP_DELAY_USEC 500000 |
| |
| #define MIN(x,y) (((x)<(y))?(x):(y)) |
| |
| |
| static int rfkill_id = -1; |
| static char *rfkill_state_path = NULL; |
| |
| |
| static int init_rfkill() { |
| char path[64]; |
| char buf[16]; |
| int fd; |
| int sz; |
| int id; |
| for (id = 0; ; id++) { |
| snprintf(path, sizeof(path), "/sys/class/rfkill/rfkill%d/type", id); |
| fd = open(path, O_RDONLY); |
| if (fd < 0) { |
| ALOGW("open(%s) failed: %s (%d)\n", path, strerror(errno), errno); |
| return -1; |
| } |
| sz = read(fd, &buf, sizeof(buf)); |
| close(fd); |
| if (sz >= 9 && memcmp(buf, "bluetooth", 9) == 0) { |
| rfkill_id = id; |
| break; |
| } |
| } |
| |
| asprintf(&rfkill_state_path, "/sys/class/rfkill/rfkill%d/state", rfkill_id); |
| return 0; |
| } |
| |
| static int check_bluetooth_power() { |
| int sz; |
| int fd = -1; |
| int ret = -1; |
| char buffer; |
| |
| if (rfkill_id == -1) { |
| if (init_rfkill()) goto out; |
| } |
| |
| fd = open(rfkill_state_path, O_RDONLY); |
| if (fd < 0) { |
| ALOGE("open(%s) failed: %s (%d)", rfkill_state_path, strerror(errno), |
| errno); |
| goto out; |
| } |
| sz = read(fd, &buffer, 1); |
| if (sz != 1) { |
| ALOGE("read(%s) failed: %s (%d)", rfkill_state_path, strerror(errno), |
| errno); |
| goto out; |
| } |
| |
| switch (buffer) { |
| case '1': |
| ret = 1; |
| break; |
| case '0': |
| ret = 0; |
| break; |
| } |
| |
| out: |
| if (fd >= 0) close(fd); |
| return ret; |
| } |
| |
| static int set_bluetooth_power(int on) { |
| int sz; |
| int fd = -1; |
| int ret = -1; |
| const char buffer = (on ? '1' : '0'); |
| |
| if (rfkill_id == -1) { |
| if (init_rfkill()) goto out; |
| } |
| |
| fd = open(rfkill_state_path, O_WRONLY); |
| if (fd < 0) { |
| ALOGE("open(%s) for write failed: %s (%d)", rfkill_state_path, |
| strerror(errno), errno); |
| goto out; |
| } |
| sz = write(fd, &buffer, 1); |
| if (sz < 0) { |
| ALOGE("write(%s) failed: %s (%d)", rfkill_state_path, strerror(errno), |
| errno); |
| goto out; |
| } |
| ret = 0; |
| |
| out: |
| if (fd >= 0) close(fd); |
| return ret; |
| } |
| |
| static inline int create_hci_sock() { |
| int sk = socket(AF_BLUETOOTH, SOCK_RAW, BTPROTO_HCI); |
| if (sk < 0) { |
| ALOGE("Failed to create bluetooth hci socket: %s (%d)", |
| strerror(errno), errno); |
| } |
| return sk; |
| } |
| |
| int bt_enable() { |
| ALOGV(__FUNCTION__); |
| |
| int ret = -1; |
| int hci_sock = -1; |
| int attempt; |
| |
| if (set_bluetooth_power(1) < 0) goto out; |
| |
| ALOGI("Starting hciattach daemon"); |
| if (property_set("ctl.start", "hciattach") < 0) { |
| ALOGE("Failed to start hciattach"); |
| set_bluetooth_power(0); |
| goto out; |
| } |
| |
| // Try for 10 seconds, this can only succeed once hciattach has sent the |
| // firmware and then turned on hci device via HCIUARTSETPROTO ioctl |
| for (attempt = 1000; attempt > 0; attempt--) { |
| hci_sock = create_hci_sock(); |
| if (hci_sock < 0) goto out; |
| |
| ret = ioctl(hci_sock, HCIDEVUP, HCI_DEV_ID); |
| |
| ALOGI("bt_enable: ret: %d, errno: %d", ret, errno); |
| if (!ret) { |
| break; |
| } else if (errno == EALREADY) { |
| ALOGW("Bluetoothd already started, unexpectedly!"); |
| break; |
| } |
| |
| close(hci_sock); |
| usleep(100000); // 100 ms retry delay |
| } |
| if (attempt == 0) { |
| ALOGE("%s: Timeout waiting for HCI device to come up, error- %d, ", |
| __FUNCTION__, ret); |
| if (property_set("ctl.stop", "hciattach") < 0) { |
| ALOGE("Error stopping hciattach"); |
| } |
| set_bluetooth_power(0); |
| goto out; |
| } |
| |
| ALOGI("Starting bluetoothd deamon"); |
| if (property_set("ctl.start", "bluetoothd") < 0) { |
| ALOGE("Failed to start bluetoothd"); |
| set_bluetooth_power(0); |
| goto out; |
| } |
| |
| ret = 0; |
| |
| out: |
| if (hci_sock >= 0) close(hci_sock); |
| return ret; |
| } |
| |
| int bt_disable() { |
| ALOGV(__FUNCTION__); |
| |
| int ret = -1; |
| int hci_sock = -1; |
| |
| ALOGI("Stopping bluetoothd deamon"); |
| if (property_set("ctl.stop", "bluetoothd") < 0) { |
| ALOGE("Error stopping bluetoothd"); |
| goto out; |
| } |
| usleep(HCID_STOP_DELAY_USEC); |
| |
| hci_sock = create_hci_sock(); |
| if (hci_sock < 0) goto out; |
| ioctl(hci_sock, HCIDEVDOWN, HCI_DEV_ID); |
| |
| ALOGI("Stopping hciattach deamon"); |
| if (property_set("ctl.stop", "hciattach") < 0) { |
| ALOGE("Error stopping hciattach"); |
| goto out; |
| } |
| |
| if (set_bluetooth_power(0) < 0) { |
| goto out; |
| } |
| ret = 0; |
| |
| out: |
| if (hci_sock >= 0) close(hci_sock); |
| return ret; |
| } |
| |
| int bt_is_enabled() { |
| ALOGV(__FUNCTION__); |
| |
| int hci_sock = -1; |
| int ret = -1; |
| struct hci_dev_info dev_info; |
| |
| |
| // Check power first |
| ret = check_bluetooth_power(); |
| if (ret == -1 || ret == 0) goto out; |
| |
| ret = -1; |
| |
| // Power is on, now check if the HCI interface is up |
| hci_sock = create_hci_sock(); |
| if (hci_sock < 0) goto out; |
| |
| dev_info.dev_id = HCI_DEV_ID; |
| if (ioctl(hci_sock, HCIGETDEVINFO, (void *)&dev_info) < 0) { |
| ret = 0; |
| goto out; |
| } |
| |
| if (dev_info.flags & (1 << (HCI_UP & 31))) { |
| ret = 1; |
| } else { |
| ret = 0; |
| } |
| |
| out: |
| if (hci_sock >= 0) close(hci_sock); |
| return ret; |
| } |
| |
| int ba2str(const bdaddr_t *ba, char *str) { |
| return sprintf(str, "%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X", |
| ba->b[5], ba->b[4], ba->b[3], ba->b[2], ba->b[1], ba->b[0]); |
| } |
| |
| int str2ba(const char *str, bdaddr_t *ba) { |
| int i; |
| for (i = 5; i >= 0; i--) { |
| ba->b[i] = (uint8_t) strtoul(str, (char **) &str, 16); |
| str++; |
| } |
| return 0; |
| } |