blob: 801e44a7e84ba5bf7c8d1c4de0c1ae1a7904a005 [file] [log] [blame]
/*
* Copyright (C) 2010 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*/
/*
* WiFi load, scan, associate, unload stress test
*
* Repeatedly executes the following sequence:
*
* 1. Load WiFi driver
* 2. Start supplicant
* 3. Random delay
* 4. Obtain supplicant status (optional)
* 5. Stop supplicant
* 6. Unload WiFi driver
*
* The "Obtain supplicant status" step is optional and is pseudo
* randomly performed 50% of the time. The default range of
* delay after start supplicant is intentionally selected such
* that the obtain supplicant status and stop supplicant steps
* may be performed while the WiFi driver is still performing a scan
* or associate. The default values are given by DEFAULT_DELAY_MIN
* and DEFAULT_DELAY_MAX. Other values can be specified through the
* use of the -d and -D command-line options.
*
* Each sequence is refered to as a pass and by default an unlimited
* number of passes are performed. An override of the range of passes
* to be executed is available through the use of the -s (start) and
* -e (end) command-line options. Can also specify a single specific
* pass via the -p option. There is also a default time in which the
* test executes, which is given by DEFAULT_DURATION and can be overriden
* through the use of the -t command-line option.
*/
#include <assert.h>
#include <errno.h>
#include <libgen.h>
#include <math.h>
#define _GNU_SOURCE
#include <sched.h>
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <hardware_legacy/wifi.h>
#define LOG_TAG "wifiLoadScanAssocTest"
#include <utils/Log.h>
#include <testUtil.h>
#define DEFAULT_START_PASS 0
#define DEFAULT_END_PASS 999
#define DEFAULT_DURATION FLT_MAX // A fairly long time, so that
// range of passes will have
// precedence
#define DEFAULT_DELAY_MIN 0.0 // Min delay after start supplicant
#define DEFAULT_DELAY_MAX 20.0 // Max delay after start supplicant
#define DELAY_EXP 150.0 // Exponent which determines the
// amount by which values closer
// to DELAY_MIN are favored.
#define CMD_STATUS "wpa_cli status 2>&1"
#define CMD_STOP_FRAMEWORK "stop 2>&1"
#define CMD_START_FRAMEWORK "start 2>&1"
#define MAXSTR 100
#define MAXCMD 500
typedef unsigned int bool_t;
#define true (0 == 0)
#define false (!true)
// File scope variables
cpu_set_t availCPU;
unsigned int numAvailCPU;
float delayMin = DEFAULT_DELAY_MIN;
float delayMax = DEFAULT_DELAY_MAX;
bool_t driverLoadedAtStart;
// Command-line mutual exclusion detection flags.
// Corresponding flag set true once an option is used.
bool_t eFlag, sFlag, pFlag;
// File scope prototypes
static void init(void);
static void randDelay(void);
static void randBind(const cpu_set_t *availSet, int *chosenCPU);
/*
* Main
*
* Performs the following high-level sequence of operations:
*
* 1. Command-line parsing
*
* 2. Initialization
*
* 3. Execute passes that repeatedly perform the WiFi load, scan,
* associate, unload sequence.
*
* 4. Restore state of WiFi driver to state it was at the
* start of the test.
*
* 5. Restart framework
*/
int
main(int argc, char *argv[])
{
FILE *fp;
int rv, opt;
int cpu;
char *chptr;
unsigned int pass;
char cmd[MAXCMD];
float duration = DEFAULT_DURATION;
unsigned int startPass = DEFAULT_START_PASS, endPass = DEFAULT_END_PASS;
struct timeval startTime, currentTime, delta;
testSetLogCatTag(LOG_TAG);
// Parse command line arguments
while ((opt = getopt(argc, argv, "d:D:s:e:p:t:?")) != -1) {
switch (opt) {
case 'd': // Minimum Delay
delayMin = strtod(optarg, &chptr);
if ((*chptr != '\0') || (delayMin < 0.0)) {
testPrintE("Invalid command-line specified minimum delay "
"of: %s", optarg);
exit(1);
}
break;
case 'D': // Maximum Delay
delayMax = strtod(optarg, &chptr);
if ((*chptr != '\0') || (delayMax < 0.0)) {
testPrintE("Invalid command-line specified maximum delay "
"of: %s", optarg);
exit(2);
}
break;
case 't': // Duration
duration = strtod(optarg, &chptr);
if ((*chptr != '\0') || (duration < 0.0)) {
testPrintE("Invalid command-line specified duration of: %s",
optarg);
exit(3);
}
break;
case 's': // Starting Pass
if (sFlag || pFlag) {
testPrintE("Invalid combination of command-line options,");
if (sFlag) {
testPrintE(" -s flag specified multiple times.");
} else {
testPrintE(" -s and -p flags are mutually exclusive.");
}
exit(10);
}
sFlag = true;
startPass = strtoul(optarg, &chptr, 10);
if (*chptr != '\0') {
testPrintE("Invalid command-line specified starting pass "
"of: %s", optarg);
exit(4);
}
break;
case 'e': // Ending Pass
if (eFlag || pFlag) {
testPrintE("Invalid combination of command-line options,");
if (sFlag) {
testPrintE(" -e flag specified multiple times.");
} else {
testPrintE(" -e and -p flags are mutually exclusive.");
}
exit(11);
}
eFlag = true;
endPass = strtoul(optarg, &chptr, 10);
if (*chptr != '\0') {
testPrintE("Invalid command-line specified ending pass "
"of: %s", optarg);
exit(5);
}
break;
case 'p': // Single Specific Pass
if (pFlag || sFlag || eFlag) {
testPrintE("Invalid combination of command-line options,");
if (pFlag) {
testPrintE(" -p flag specified multiple times.");
} else {
testPrintE(" -p and -%c flags are mutually exclusive.",
(sFlag) ? 's' : 'e');
}
exit(12);
}
pFlag = true;
endPass = startPass = strtoul(optarg, &chptr, 10);
if (*chptr != '\0') {
testPrintE("Invalid command-line specified pass "
"of: %s", optarg);
exit(13);
}
break;
case '?':
default:
testPrintE(" %s [options]", basename(argv[0]));
testPrintE(" options:");
testPrintE(" -s Starting pass");
testPrintE(" -e Ending pass");
testPrintE(" -p Specific single pass");
testPrintE(" -t Duration");
testPrintE(" -d Delay min");
testPrintE(" -D Delay max");
exit(((optopt == 0) || (optopt == '?')) ? 0 : 6);
}
}
if (delayMax < delayMin) {
testPrintE("Unexpected maximum delay less than minimum delay");
testPrintE(" delayMin: %f delayMax: %f", delayMin, delayMax);
exit(7);
}
if (endPass < startPass) {
testPrintE("Unexpected ending pass before starting pass");
testPrintE(" startPass: %u endPass: %u", startPass, endPass);
exit(8);
}
if (argc != optind) {
testPrintE("Unexpected command-line postional argument");
testPrintE(" %s [-s start_pass] [-e end_pass] [-d duration]",
basename(argv[0]));
exit(9);
}
testPrintI("duration: %g", duration);
testPrintI("startPass: %u", startPass);
testPrintI("endPass: %u", endPass);
testPrintI("delayMin: %f", delayMin);
testPrintI("delayMax: %f", delayMax);
init();
// For each pass
gettimeofday(&startTime, NULL);
for (pass = startPass; pass <= endPass; pass++) {
// Stop if duration of work has already been performed
gettimeofday(&currentTime, NULL);
delta = tvDelta(&startTime, &currentTime);
if (tv2double(&delta) > duration) { break; }
testPrintI("==== Starting pass: %u", pass);
// Use a pass dependent sequence of random numbers
srand48(pass);
// Load WiFi Driver
randBind(&availCPU, &cpu);
if ((rv = wifi_load_driver()) != 0) {
testPrintE("CPU: %i wifi_load_driver() failed, rv: %i\n",
cpu, rv);
exit(20);
}
testPrintI("CPU: %i wifi_load_driver succeeded", cpu);
// Start Supplicant
randBind(&availCPU, &cpu);
if ((rv = wifi_start_supplicant(false)) != 0) {
testPrintE("CPU: %i wifi_start_supplicant() failed, rv: %i\n",
cpu, rv);
exit(21);
}
testPrintI("CPU: %i wifi_start_supplicant succeeded", cpu);
// Sleep a random amount of time
randDelay();
/*
* Obtain WiFi Status
* Half the time skip this step, which helps increase the
* level of randomization.
*/
if (testRandBool()) {
rv = snprintf(cmd, sizeof(cmd), "%s", CMD_STATUS);
if (rv >= (signed) sizeof(cmd) - 1) {
testPrintE("Command too long for: %s\n", CMD_STATUS);
exit(22);
}
testExecCmd(cmd);
}
// Stop Supplicant
randBind(&availCPU, &cpu);
if ((rv = wifi_stop_supplicant(false)) != 0) {
testPrintE("CPU: %i wifi_stop_supplicant() failed, rv: %i\n",
cpu, rv);
exit(23);
}
testPrintI("CPU: %i wifi_stop_supplicant succeeded", cpu);
// Unload WiFi Module
randBind(&availCPU, &cpu);
if ((rv = wifi_unload_driver()) != 0) {
testPrintE("CPU: %i wifi_unload_driver() failed, rv: %i\n",
cpu, rv);
exit(24);
}
testPrintI("CPU: %i wifi_unload_driver succeeded", cpu);
testPrintI("==== Completed pass: %u", pass);
}
// If needed restore WiFi driver to state it was in at the
// start of the test. It is assumed that it the driver
// was loaded, then the wpa_supplicant was also running.
if (driverLoadedAtStart) {
// Load driver
if ((rv = wifi_load_driver()) != 0) {
testPrintE("main load driver failed, rv: %i", rv);
exit(25);
}
// Start supplicant
if ((rv = wifi_start_supplicant(false)) != 0) {
testPrintE("main start supplicant failed, rv: %i", rv);
exit(26);
}
// Obtain WiFi Status
rv = snprintf(cmd, sizeof(cmd), "%s", CMD_STATUS);
if (rv >= (signed) sizeof(cmd) - 1) {
testPrintE("Command too long for: %s\n", CMD_STATUS);
exit(22);
}
testExecCmd(cmd);
}
// Start framework
rv = snprintf(cmd, sizeof(cmd), "%s", CMD_START_FRAMEWORK);
if (rv >= (signed) sizeof(cmd) - 1) {
testPrintE("Command too long for: %s\n", CMD_START_FRAMEWORK);
exit(27);
}
testExecCmd(cmd);
testPrintI("Successfully completed %u passes", pass - startPass);
return 0;
}
/*
* Initialize
*
* Perform testcase initialization, which includes:
*
* 1. Determine which CPUs are available for use
*
* 2. Determine total number of available CPUs
*
* 3. Stop framework
*
* 4. Determine whether WiFi driver is loaded and if so
* stop wpa_supplicant and unload WiFi driver.
*/
void
init(void)
{
int rv;
unsigned int n1;
char cmd[MAXCMD];
// Use whichever CPUs are available at start of test
rv = sched_getaffinity(0, sizeof(availCPU), &availCPU);
if (rv != 0) {
testPrintE("init sched_getaffinity failed, rv: %i errno: %i",
rv, errno);
exit(40);
}
// How many CPUs are available
numAvailCPU = 0;
for (n1 = 0; n1 < CPU_SETSIZE; n1++) {
if (CPU_ISSET(n1, &availCPU)) { numAvailCPU++; }
}
testPrintI("numAvailCPU: %u", numAvailCPU);
// Stop framework
rv = snprintf(cmd, sizeof(cmd), "%s", CMD_STOP_FRAMEWORK);
if (rv >= (signed) sizeof(cmd) - 1) {
testPrintE("Command too long for: %s\n", CMD_STOP_FRAMEWORK);
exit(41);
}
testExecCmd(cmd);
// Is WiFi driver loaded?
// If so stop the wpa_supplicant and unload the driver.
driverLoadedAtStart = is_wifi_driver_loaded();
testPrintI("driverLoadedAtStart: %u", driverLoadedAtStart);
if (driverLoadedAtStart) {
// Stop wpa_supplicant
// Might already be stopped, in which case request should
// return immediately with success.
if ((rv = wifi_stop_supplicant(false)) != 0) {
testPrintE("init stop supplicant failed, rv: %i", rv);
exit(42);
}
testPrintI("Stopped wpa_supplicant");
if ((rv = wifi_unload_driver()) != 0) {
testPrintE("init unload driver failed, rv: %i", rv);
exit(43);
}
testPrintI("WiFi driver unloaded");
}
}
/*
* Random Delay
*
* Delays for a random amount of time within the range given
* by the file scope variables delayMin and delayMax. The
* selected amount of delay can come from any part of the
* range, with a bias towards values closer to delayMin.
* The amount of bias is determined by the setting of DELAY_EXP.
* The setting of DELAY_EXP should always be > 1.0, with higher
* values causing a more significant bias toward the value
* of delayMin.
*/
void randDelay(void)
{
const unsigned long nanosecspersec = 1000000000;
float fract, biasedFract, amt;
struct timeval startTime, endTime;
// Obtain start time
gettimeofday(&startTime, NULL);
// Determine random amount to sleep.
// Values closer to delayMin are prefered by an amount
// determined by the value of DELAY_EXP.
fract = testRandFract();
biasedFract = pow(DELAY_EXP, fract) / pow(DELAY_EXP, 1.0);
amt = delayMin + ((delayMax - delayMin) * biasedFract);
// Delay
testDelay(amt);
// Obtain end time and display delta
gettimeofday(&endTime, NULL);
testPrintI("delay: %.2f",
(float) (tv2double(&endTime) - tv2double(&startTime)));
}
static void
randBind(const cpu_set_t *availSet, int *chosenCPU)
{
int rv;
cpu_set_t cpuset;
int chosenAvail, avail, cpu, currentCPU;
// Randomly bind to a CPU
// Lower 16 bits from random number generator thrown away,
// because the low-order bits tend to have the same sequence for
// different seed values.
chosenAvail = testRandMod(numAvailCPU);
CPU_ZERO(&cpuset);
avail = 0;
for (cpu = 0; cpu < CPU_SETSIZE; cpu++) {
if (CPU_ISSET(cpu, availSet)) {
if (chosenAvail == avail) {
CPU_SET(cpu, &cpuset);
break;
}
avail++;
}
}
assert(cpu < CPU_SETSIZE);
sched_setaffinity(0, sizeof(cpuset), &cpuset);
// Confirm executing on requested CPU
if ((currentCPU = sched_getcpu()) < 0) {
testPrintE("randBind sched_getcpu() failed, rv: %i errno: %i",
currentCPU, errno);
exit(80);
}
if (currentCPU != cpu) {
testPrintE("randBind executing on unexpected CPU %i, expected %i",
currentCPU, cpu);
exit(81);
}
// Let the caller know which CPU was chosen
*chosenCPU = cpu;
}