| /* |
| * Copyright (C) 2010 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| */ |
| |
| /* |
| * WiFi load, scan, associate, unload stress test |
| * |
| * Repeatedly executes the following sequence: |
| * |
| * 1. Load WiFi driver |
| * 2. Start supplicant |
| * 3. Random delay |
| * 4. Obtain supplicant status (optional) |
| * 5. Stop supplicant |
| * 6. Unload WiFi driver |
| * |
| * The "Obtain supplicant status" step is optional and is pseudo |
| * randomly performed 50% of the time. The default range of |
| * delay after start supplicant is intentionally selected such |
| * that the obtain supplicant status and stop supplicant steps |
| * may be performed while the WiFi driver is still performing a scan |
| * or associate. The default values are given by DEFAULT_DELAY_MIN |
| * and DEFAULT_DELAY_MAX. Other values can be specified through the |
| * use of the -d and -D command-line options. |
| * |
| * Each sequence is refered to as a pass and by default an unlimited |
| * number of passes are performed. An override of the range of passes |
| * to be executed is available through the use of the -s (start) and |
| * -e (end) command-line options. Can also specify a single specific |
| * pass via the -p option. There is also a default time in which the |
| * test executes, which is given by DEFAULT_DURATION and can be overriden |
| * through the use of the -t command-line option. |
| */ |
| |
| #include <assert.h> |
| #include <errno.h> |
| #include <libgen.h> |
| #include <math.h> |
| #define _GNU_SOURCE |
| #include <sched.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <time.h> |
| #include <unistd.h> |
| |
| #include <sys/syscall.h> |
| #include <sys/types.h> |
| #include <sys/wait.h> |
| |
| #include <hardware_legacy/wifi.h> |
| |
| #define LOG_TAG "wifiLoadScanAssocTest" |
| #include <utils/Log.h> |
| #include <testUtil.h> |
| |
| #define DEFAULT_START_PASS 0 |
| #define DEFAULT_END_PASS 999 |
| #define DEFAULT_DURATION FLT_MAX // A fairly long time, so that |
| // range of passes will have |
| // precedence |
| #define DEFAULT_DELAY_MIN 0.0 // Min delay after start supplicant |
| #define DEFAULT_DELAY_MAX 20.0 // Max delay after start supplicant |
| #define DELAY_EXP 150.0 // Exponent which determines the |
| // amount by which values closer |
| // to DELAY_MIN are favored. |
| |
| #define CMD_STATUS "wpa_cli status 2>&1" |
| #define CMD_STOP_FRAMEWORK "stop 2>&1" |
| #define CMD_START_FRAMEWORK "start 2>&1" |
| |
| #define MAXSTR 100 |
| #define MAXCMD 500 |
| |
| typedef unsigned int bool_t; |
| #define true (0 == 0) |
| #define false (!true) |
| |
| // File scope variables |
| cpu_set_t availCPU; |
| unsigned int numAvailCPU; |
| float delayMin = DEFAULT_DELAY_MIN; |
| float delayMax = DEFAULT_DELAY_MAX; |
| bool_t driverLoadedAtStart; |
| |
| // Command-line mutual exclusion detection flags. |
| // Corresponding flag set true once an option is used. |
| bool_t eFlag, sFlag, pFlag; |
| |
| // File scope prototypes |
| static void init(void); |
| static void randDelay(void); |
| static void randBind(const cpu_set_t *availSet, int *chosenCPU); |
| |
| /* |
| * Main |
| * |
| * Performs the following high-level sequence of operations: |
| * |
| * 1. Command-line parsing |
| * |
| * 2. Initialization |
| * |
| * 3. Execute passes that repeatedly perform the WiFi load, scan, |
| * associate, unload sequence. |
| * |
| * 4. Restore state of WiFi driver to state it was at the |
| * start of the test. |
| * |
| * 5. Restart framework |
| */ |
| int |
| main(int argc, char *argv[]) |
| { |
| FILE *fp; |
| int rv, opt; |
| int cpu; |
| char *chptr; |
| unsigned int pass; |
| char cmd[MAXCMD]; |
| float duration = DEFAULT_DURATION; |
| unsigned int startPass = DEFAULT_START_PASS, endPass = DEFAULT_END_PASS; |
| struct timeval startTime, currentTime, delta; |
| |
| testSetLogCatTag(LOG_TAG); |
| |
| // Parse command line arguments |
| while ((opt = getopt(argc, argv, "d:D:s:e:p:t:?")) != -1) { |
| switch (opt) { |
| case 'd': // Minimum Delay |
| delayMin = strtod(optarg, &chptr); |
| if ((*chptr != '\0') || (delayMin < 0.0)) { |
| testPrintE("Invalid command-line specified minimum delay " |
| "of: %s", optarg); |
| exit(1); |
| } |
| break; |
| |
| case 'D': // Maximum Delay |
| delayMax = strtod(optarg, &chptr); |
| if ((*chptr != '\0') || (delayMax < 0.0)) { |
| testPrintE("Invalid command-line specified maximum delay " |
| "of: %s", optarg); |
| exit(2); |
| } |
| break; |
| |
| case 't': // Duration |
| duration = strtod(optarg, &chptr); |
| if ((*chptr != '\0') || (duration < 0.0)) { |
| testPrintE("Invalid command-line specified duration of: %s", |
| optarg); |
| exit(3); |
| } |
| break; |
| |
| case 's': // Starting Pass |
| if (sFlag || pFlag) { |
| testPrintE("Invalid combination of command-line options,"); |
| if (sFlag) { |
| testPrintE(" -s flag specified multiple times."); |
| } else { |
| testPrintE(" -s and -p flags are mutually exclusive."); |
| } |
| exit(10); |
| } |
| sFlag = true; |
| startPass = strtoul(optarg, &chptr, 10); |
| if (*chptr != '\0') { |
| testPrintE("Invalid command-line specified starting pass " |
| "of: %s", optarg); |
| exit(4); |
| } |
| break; |
| |
| case 'e': // Ending Pass |
| if (eFlag || pFlag) { |
| testPrintE("Invalid combination of command-line options,"); |
| if (sFlag) { |
| testPrintE(" -e flag specified multiple times."); |
| } else { |
| testPrintE(" -e and -p flags are mutually exclusive."); |
| } |
| exit(11); |
| } |
| eFlag = true; |
| endPass = strtoul(optarg, &chptr, 10); |
| if (*chptr != '\0') { |
| testPrintE("Invalid command-line specified ending pass " |
| "of: %s", optarg); |
| exit(5); |
| } |
| break; |
| |
| case 'p': // Single Specific Pass |
| if (pFlag || sFlag || eFlag) { |
| testPrintE("Invalid combination of command-line options,"); |
| if (pFlag) { |
| testPrintE(" -p flag specified multiple times."); |
| } else { |
| testPrintE(" -p and -%c flags are mutually exclusive.", |
| (sFlag) ? 's' : 'e'); |
| } |
| exit(12); |
| } |
| pFlag = true; |
| endPass = startPass = strtoul(optarg, &chptr, 10); |
| if (*chptr != '\0') { |
| testPrintE("Invalid command-line specified pass " |
| "of: %s", optarg); |
| exit(13); |
| } |
| break; |
| |
| case '?': |
| default: |
| testPrintE(" %s [options]", basename(argv[0])); |
| testPrintE(" options:"); |
| testPrintE(" -s Starting pass"); |
| testPrintE(" -e Ending pass"); |
| testPrintE(" -p Specific single pass"); |
| testPrintE(" -t Duration"); |
| testPrintE(" -d Delay min"); |
| testPrintE(" -D Delay max"); |
| exit(((optopt == 0) || (optopt == '?')) ? 0 : 6); |
| } |
| } |
| if (delayMax < delayMin) { |
| testPrintE("Unexpected maximum delay less than minimum delay"); |
| testPrintE(" delayMin: %f delayMax: %f", delayMin, delayMax); |
| exit(7); |
| } |
| if (endPass < startPass) { |
| testPrintE("Unexpected ending pass before starting pass"); |
| testPrintE(" startPass: %u endPass: %u", startPass, endPass); |
| exit(8); |
| } |
| if (argc != optind) { |
| testPrintE("Unexpected command-line postional argument"); |
| testPrintE(" %s [-s start_pass] [-e end_pass] [-d duration]", |
| basename(argv[0])); |
| exit(9); |
| } |
| testPrintI("duration: %g", duration); |
| testPrintI("startPass: %u", startPass); |
| testPrintI("endPass: %u", endPass); |
| testPrintI("delayMin: %f", delayMin); |
| testPrintI("delayMax: %f", delayMax); |
| |
| init(); |
| |
| // For each pass |
| gettimeofday(&startTime, NULL); |
| for (pass = startPass; pass <= endPass; pass++) { |
| // Stop if duration of work has already been performed |
| gettimeofday(¤tTime, NULL); |
| delta = tvDelta(&startTime, ¤tTime); |
| if (tv2double(&delta) > duration) { break; } |
| |
| testPrintI("==== Starting pass: %u", pass); |
| |
| // Use a pass dependent sequence of random numbers |
| srand48(pass); |
| |
| // Load WiFi Driver |
| randBind(&availCPU, &cpu); |
| if ((rv = wifi_load_driver()) != 0) { |
| testPrintE("CPU: %i wifi_load_driver() failed, rv: %i\n", |
| cpu, rv); |
| exit(20); |
| } |
| testPrintI("CPU: %i wifi_load_driver succeeded", cpu); |
| |
| // Start Supplicant |
| randBind(&availCPU, &cpu); |
| if ((rv = wifi_start_supplicant(false)) != 0) { |
| testPrintE("CPU: %i wifi_start_supplicant() failed, rv: %i\n", |
| cpu, rv); |
| exit(21); |
| } |
| testPrintI("CPU: %i wifi_start_supplicant succeeded", cpu); |
| |
| // Sleep a random amount of time |
| randDelay(); |
| |
| /* |
| * Obtain WiFi Status |
| * Half the time skip this step, which helps increase the |
| * level of randomization. |
| */ |
| if (testRandBool()) { |
| rv = snprintf(cmd, sizeof(cmd), "%s", CMD_STATUS); |
| if (rv >= (signed) sizeof(cmd) - 1) { |
| testPrintE("Command too long for: %s\n", CMD_STATUS); |
| exit(22); |
| } |
| testExecCmd(cmd); |
| } |
| |
| // Stop Supplicant |
| randBind(&availCPU, &cpu); |
| if ((rv = wifi_stop_supplicant()) != 0) { |
| testPrintE("CPU: %i wifi_stop_supplicant() failed, rv: %i\n", |
| cpu, rv); |
| exit(23); |
| } |
| testPrintI("CPU: %i wifi_stop_supplicant succeeded", cpu); |
| |
| // Unload WiFi Module |
| randBind(&availCPU, &cpu); |
| if ((rv = wifi_unload_driver()) != 0) { |
| testPrintE("CPU: %i wifi_unload_driver() failed, rv: %i\n", |
| cpu, rv); |
| exit(24); |
| } |
| testPrintI("CPU: %i wifi_unload_driver succeeded", cpu); |
| |
| testPrintI("==== Completed pass: %u", pass); |
| } |
| |
| // If needed restore WiFi driver to state it was in at the |
| // start of the test. It is assumed that it the driver |
| // was loaded, then the wpa_supplicant was also running. |
| if (driverLoadedAtStart) { |
| // Load driver |
| if ((rv = wifi_load_driver()) != 0) { |
| testPrintE("main load driver failed, rv: %i", rv); |
| exit(25); |
| } |
| |
| // Start supplicant |
| if ((rv = wifi_start_supplicant(false)) != 0) { |
| testPrintE("main start supplicant failed, rv: %i", rv); |
| exit(26); |
| } |
| |
| // Obtain WiFi Status |
| rv = snprintf(cmd, sizeof(cmd), "%s", CMD_STATUS); |
| if (rv >= (signed) sizeof(cmd) - 1) { |
| testPrintE("Command too long for: %s\n", CMD_STATUS); |
| exit(22); |
| } |
| testExecCmd(cmd); |
| } |
| |
| // Start framework |
| rv = snprintf(cmd, sizeof(cmd), "%s", CMD_START_FRAMEWORK); |
| if (rv >= (signed) sizeof(cmd) - 1) { |
| testPrintE("Command too long for: %s\n", CMD_START_FRAMEWORK); |
| exit(27); |
| } |
| testExecCmd(cmd); |
| |
| testPrintI("Successfully completed %u passes", pass - startPass); |
| |
| return 0; |
| } |
| |
| /* |
| * Initialize |
| * |
| * Perform testcase initialization, which includes: |
| * |
| * 1. Determine which CPUs are available for use |
| * |
| * 2. Determine total number of available CPUs |
| * |
| * 3. Stop framework |
| * |
| * 4. Determine whether WiFi driver is loaded and if so |
| * stop wpa_supplicant and unload WiFi driver. |
| */ |
| void |
| init(void) |
| { |
| int rv; |
| unsigned int n1; |
| char cmd[MAXCMD]; |
| |
| // Use whichever CPUs are available at start of test |
| rv = sched_getaffinity(0, sizeof(availCPU), &availCPU); |
| if (rv != 0) { |
| testPrintE("init sched_getaffinity failed, rv: %i errno: %i", |
| rv, errno); |
| exit(40); |
| } |
| |
| // How many CPUs are available |
| numAvailCPU = 0; |
| for (n1 = 0; n1 < CPU_SETSIZE; n1++) { |
| if (CPU_ISSET(n1, &availCPU)) { numAvailCPU++; } |
| } |
| testPrintI("numAvailCPU: %u", numAvailCPU); |
| |
| // Stop framework |
| rv = snprintf(cmd, sizeof(cmd), "%s", CMD_STOP_FRAMEWORK); |
| if (rv >= (signed) sizeof(cmd) - 1) { |
| testPrintE("Command too long for: %s\n", CMD_STOP_FRAMEWORK); |
| exit(41); |
| } |
| testExecCmd(cmd); |
| |
| // Is WiFi driver loaded? |
| // If so stop the wpa_supplicant and unload the driver. |
| driverLoadedAtStart = is_wifi_driver_loaded(); |
| testPrintI("driverLoadedAtStart: %u", driverLoadedAtStart); |
| if (driverLoadedAtStart) { |
| // Stop wpa_supplicant |
| // Might already be stopped, in which case request should |
| // return immediately with success. |
| if ((rv = wifi_stop_supplicant()) != 0) { |
| testPrintE("init stop supplicant failed, rv: %i", rv); |
| exit(42); |
| } |
| testPrintI("Stopped wpa_supplicant"); |
| |
| if ((rv = wifi_unload_driver()) != 0) { |
| testPrintE("init unload driver failed, rv: %i", rv); |
| exit(43); |
| } |
| testPrintI("WiFi driver unloaded"); |
| } |
| |
| } |
| |
| /* |
| * Random Delay |
| * |
| * Delays for a random amount of time within the range given |
| * by the file scope variables delayMin and delayMax. The |
| * selected amount of delay can come from any part of the |
| * range, with a bias towards values closer to delayMin. |
| * The amount of bias is determined by the setting of DELAY_EXP. |
| * The setting of DELAY_EXP should always be > 1.0, with higher |
| * values causing a more significant bias toward the value |
| * of delayMin. |
| */ |
| void randDelay(void) |
| { |
| const unsigned long nanosecspersec = 1000000000; |
| float fract, biasedFract, amt; |
| struct timeval startTime, endTime; |
| |
| // Obtain start time |
| gettimeofday(&startTime, NULL); |
| |
| // Determine random amount to sleep. |
| // Values closer to delayMin are prefered by an amount |
| // determined by the value of DELAY_EXP. |
| fract = testRandFract(); |
| biasedFract = pow(DELAY_EXP, fract) / pow(DELAY_EXP, 1.0); |
| amt = delayMin + ((delayMax - delayMin) * biasedFract); |
| |
| // Delay |
| testDelay(amt); |
| |
| // Obtain end time and display delta |
| gettimeofday(&endTime, NULL); |
| testPrintI("delay: %.2f", |
| (float) (tv2double(&endTime) - tv2double(&startTime))); |
| } |
| |
| static void |
| randBind(const cpu_set_t *availSet, int *chosenCPU) |
| { |
| int rv; |
| cpu_set_t cpuset; |
| int chosenAvail, avail, cpu, currentCPU; |
| |
| // Randomly bind to a CPU |
| // Lower 16 bits from random number generator thrown away, |
| // because the low-order bits tend to have the same sequence for |
| // different seed values. |
| chosenAvail = testRandMod(numAvailCPU); |
| CPU_ZERO(&cpuset); |
| avail = 0; |
| for (cpu = 0; cpu < CPU_SETSIZE; cpu++) { |
| if (CPU_ISSET(cpu, availSet)) { |
| if (chosenAvail == avail) { |
| CPU_SET(cpu, &cpuset); |
| break; |
| } |
| avail++; |
| } |
| } |
| assert(cpu < CPU_SETSIZE); |
| sched_setaffinity(0, sizeof(cpuset), &cpuset); |
| |
| // Confirm executing on requested CPU |
| if ((currentCPU = sched_getcpu()) < 0) { |
| testPrintE("randBind sched_getcpu() failed, rv: %i errno: %i", |
| currentCPU, errno); |
| exit(80); |
| |
| } |
| if (currentCPU != cpu) { |
| testPrintE("randBind executing on unexpected CPU %i, expected %i", |
| currentCPU, cpu); |
| exit(81); |
| } |
| |
| // Let the caller know which CPU was chosen |
| *chosenCPU = cpu; |
| } |
