| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <stdlib.h> |
| #include <string.h> |
| #include <dirent.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <sys/types.h> |
| #include <sys/mman.h> |
| #include <sys/mount.h> |
| #include <sys/param.h> |
| |
| #include <linux/kdev_t.h> |
| #include <linux/fs.h> |
| |
| #include <cutils/properties.h> |
| |
| #include <diskconfig/diskconfig.h> |
| |
| #include <private/android_filesystem_config.h> |
| |
| #define LOG_TAG "Vold" |
| |
| #include <cutils/log.h> |
| |
| #include "Volume.h" |
| #include "VolumeManager.h" |
| #include "ResponseCode.h" |
| #include "Fat.h" |
| #include "Process.h" |
| #include "cryptfs.h" |
| |
| extern "C" void dos_partition_dec(void const *pp, struct dos_partition *d); |
| extern "C" void dos_partition_enc(void *pp, struct dos_partition *d); |
| |
| |
| /* |
| * Secure directory - stuff that only root can see |
| */ |
| const char *Volume::SECDIR = "/mnt/secure"; |
| |
| /* |
| * Secure staging directory - where media is mounted for preparation |
| */ |
| const char *Volume::SEC_STGDIR = "/mnt/secure/staging"; |
| |
| /* |
| * Path to the directory on the media which contains publicly accessable |
| * asec imagefiles. This path will be obscured before the mount is |
| * exposed to non priviledged users. |
| */ |
| const char *Volume::SEC_STG_SECIMGDIR = "/mnt/secure/staging/.android_secure"; |
| |
| /* |
| * Path to external storage where *only* root can access ASEC image files |
| */ |
| const char *Volume::SEC_ASECDIR_EXT = "/mnt/secure/asec"; |
| |
| /* |
| * Path to internal storage where *only* root can access ASEC image files |
| */ |
| const char *Volume::SEC_ASECDIR_INT = "/data/app-asec"; |
| /* |
| * Path to where secure containers are mounted |
| */ |
| const char *Volume::ASECDIR = "/mnt/asec"; |
| |
| /* |
| * Path to where OBBs are mounted |
| */ |
| const char *Volume::LOOPDIR = "/mnt/obb"; |
| |
| static const char *stateToStr(int state) { |
| if (state == Volume::State_Init) |
| return "Initializing"; |
| else if (state == Volume::State_NoMedia) |
| return "No-Media"; |
| else if (state == Volume::State_Idle) |
| return "Idle-Unmounted"; |
| else if (state == Volume::State_Pending) |
| return "Pending"; |
| else if (state == Volume::State_Mounted) |
| return "Mounted"; |
| else if (state == Volume::State_Unmounting) |
| return "Unmounting"; |
| else if (state == Volume::State_Checking) |
| return "Checking"; |
| else if (state == Volume::State_Formatting) |
| return "Formatting"; |
| else if (state == Volume::State_Shared) |
| return "Shared-Unmounted"; |
| else if (state == Volume::State_SharedMnt) |
| return "Shared-Mounted"; |
| else |
| return "Unknown-Error"; |
| } |
| |
| Volume::Volume(VolumeManager *vm, const char *label, const char *mount_point) { |
| mVm = vm; |
| mDebug = false; |
| mLabel = strdup(label); |
| mMountpoint = strdup(mount_point); |
| mState = Volume::State_Init; |
| mCurrentlyMountedKdev = -1; |
| mPartIdx = -1; |
| mRetryMount = false; |
| } |
| |
| Volume::~Volume() { |
| free(mLabel); |
| free(mMountpoint); |
| } |
| |
| void Volume::protectFromAutorunStupidity() { |
| char filename[255]; |
| |
| snprintf(filename, sizeof(filename), "%s/autorun.inf", SEC_STGDIR); |
| if (!access(filename, F_OK)) { |
| SLOGW("Volume contains an autorun.inf! - removing"); |
| /* |
| * Ensure the filename is all lower-case so |
| * the process killer can find the inode. |
| * Probably being paranoid here but meh. |
| */ |
| rename(filename, filename); |
| Process::killProcessesWithOpenFiles(filename, 2); |
| if (unlink(filename)) { |
| SLOGE("Failed to remove %s (%s)", filename, strerror(errno)); |
| } |
| } |
| } |
| |
| void Volume::setDebug(bool enable) { |
| mDebug = enable; |
| } |
| |
| dev_t Volume::getDiskDevice() { |
| return MKDEV(0, 0); |
| }; |
| |
| dev_t Volume::getShareDevice() { |
| return getDiskDevice(); |
| } |
| |
| void Volume::handleVolumeShared() { |
| } |
| |
| void Volume::handleVolumeUnshared() { |
| } |
| |
| int Volume::handleBlockEvent(NetlinkEvent *evt) { |
| errno = ENOSYS; |
| return -1; |
| } |
| |
| void Volume::setState(int state) { |
| char msg[255]; |
| int oldState = mState; |
| |
| if (oldState == state) { |
| SLOGW("Duplicate state (%d)\n", state); |
| return; |
| } |
| |
| if ((oldState == Volume::State_Pending) && (state != Volume::State_Idle)) { |
| mRetryMount = false; |
| } |
| |
| mState = state; |
| |
| SLOGD("Volume %s state changing %d (%s) -> %d (%s)", mLabel, |
| oldState, stateToStr(oldState), mState, stateToStr(mState)); |
| snprintf(msg, sizeof(msg), |
| "Volume %s %s state changed from %d (%s) to %d (%s)", getLabel(), |
| getMountpoint(), oldState, stateToStr(oldState), mState, |
| stateToStr(mState)); |
| |
| mVm->getBroadcaster()->sendBroadcast(ResponseCode::VolumeStateChange, |
| msg, false); |
| } |
| |
| int Volume::createDeviceNode(const char *path, int major, int minor) { |
| mode_t mode = 0660 | S_IFBLK; |
| dev_t dev = (major << 8) | minor; |
| if (mknod(path, mode, dev) < 0) { |
| if (errno != EEXIST) { |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| int Volume::formatVol() { |
| |
| if (getState() == Volume::State_NoMedia) { |
| errno = ENODEV; |
| return -1; |
| } else if (getState() != Volume::State_Idle) { |
| errno = EBUSY; |
| return -1; |
| } |
| |
| if (isMountpointMounted(getMountpoint())) { |
| SLOGW("Volume is idle but appears to be mounted - fixing"); |
| setState(Volume::State_Mounted); |
| // mCurrentlyMountedKdev = XXX |
| errno = EBUSY; |
| return -1; |
| } |
| |
| bool formatEntireDevice = (mPartIdx == -1); |
| char devicePath[255]; |
| dev_t diskNode = getDiskDevice(); |
| dev_t partNode = MKDEV(MAJOR(diskNode), (formatEntireDevice ? 1 : mPartIdx)); |
| |
| setState(Volume::State_Formatting); |
| |
| int ret = -1; |
| // Only initialize the MBR if we are formatting the entire device |
| if (formatEntireDevice) { |
| sprintf(devicePath, "/dev/block/vold/%d:%d", |
| MAJOR(diskNode), MINOR(diskNode)); |
| |
| if (initializeMbr(devicePath)) { |
| SLOGE("Failed to initialize MBR (%s)", strerror(errno)); |
| goto err; |
| } |
| } |
| |
| sprintf(devicePath, "/dev/block/vold/%d:%d", |
| MAJOR(partNode), MINOR(partNode)); |
| |
| if (mDebug) { |
| SLOGI("Formatting volume %s (%s)", getLabel(), devicePath); |
| } |
| |
| if (Fat::format(devicePath, 0)) { |
| SLOGE("Failed to format (%s)", strerror(errno)); |
| goto err; |
| } |
| |
| ret = 0; |
| |
| err: |
| setState(Volume::State_Idle); |
| return ret; |
| } |
| |
| bool Volume::isMountpointMounted(const char *path) { |
| char device[256]; |
| char mount_path[256]; |
| char rest[256]; |
| FILE *fp; |
| char line[1024]; |
| |
| if (!(fp = fopen("/proc/mounts", "r"))) { |
| SLOGE("Error opening /proc/mounts (%s)", strerror(errno)); |
| return false; |
| } |
| |
| while(fgets(line, sizeof(line), fp)) { |
| line[strlen(line)-1] = '\0'; |
| sscanf(line, "%255s %255s %255s\n", device, mount_path, rest); |
| if (!strcmp(mount_path, path)) { |
| fclose(fp); |
| return true; |
| } |
| |
| } |
| |
| fclose(fp); |
| return false; |
| } |
| |
| int Volume::mountVol() { |
| dev_t deviceNodes[4]; |
| int n, i, rc = 0; |
| char errmsg[255]; |
| const char* externalStorage = getenv("EXTERNAL_STORAGE"); |
| bool primaryStorage = externalStorage && !strcmp(getMountpoint(), externalStorage); |
| char decrypt_state[PROPERTY_VALUE_MAX]; |
| char crypto_state[PROPERTY_VALUE_MAX]; |
| char encrypt_progress[PROPERTY_VALUE_MAX]; |
| int flags; |
| |
| property_get("vold.decrypt", decrypt_state, ""); |
| property_get("vold.encrypt_progress", encrypt_progress, ""); |
| |
| /* Don't try to mount the volumes if we have not yet entered the disk password |
| * or are in the process of encrypting. |
| */ |
| if ((getState() == Volume::State_NoMedia) || |
| ((!strcmp(decrypt_state, "1") || encrypt_progress[0]) && primaryStorage)) { |
| snprintf(errmsg, sizeof(errmsg), |
| "Volume %s %s mount failed - no media", |
| getLabel(), getMountpoint()); |
| mVm->getBroadcaster()->sendBroadcast( |
| ResponseCode::VolumeMountFailedNoMedia, |
| errmsg, false); |
| errno = ENODEV; |
| return -1; |
| } else if (getState() != Volume::State_Idle) { |
| errno = EBUSY; |
| if (getState() == Volume::State_Pending) { |
| mRetryMount = true; |
| } |
| return -1; |
| } |
| |
| if (isMountpointMounted(getMountpoint())) { |
| SLOGW("Volume is idle but appears to be mounted - fixing"); |
| setState(Volume::State_Mounted); |
| // mCurrentlyMountedKdev = XXX |
| return 0; |
| } |
| |
| n = getDeviceNodes((dev_t *) &deviceNodes, 4); |
| if (!n) { |
| SLOGE("Failed to get device nodes (%s)\n", strerror(errno)); |
| return -1; |
| } |
| |
| /* If we're running encrypted, and the volume is marked as encryptable and nonremovable, |
| * and vold is asking to mount the primaryStorage device, then we need to decrypt |
| * that partition, and update the volume object to point to it's new decrypted |
| * block device |
| */ |
| property_get("ro.crypto.state", crypto_state, ""); |
| flags = getFlags(); |
| if (primaryStorage && |
| ((flags & (VOL_NONREMOVABLE | VOL_ENCRYPTABLE))==(VOL_NONREMOVABLE | VOL_ENCRYPTABLE)) && |
| !strcmp(crypto_state, "encrypted") && !isDecrypted()) { |
| char new_sys_path[MAXPATHLEN]; |
| char nodepath[256]; |
| int new_major, new_minor; |
| |
| if (n != 1) { |
| /* We only expect one device node returned when mounting encryptable volumes */ |
| SLOGE("Too many device nodes returned when mounting %d\n", getMountpoint()); |
| return -1; |
| } |
| |
| if (cryptfs_setup_volume(getLabel(), MAJOR(deviceNodes[0]), MINOR(deviceNodes[0]), |
| new_sys_path, sizeof(new_sys_path), |
| &new_major, &new_minor)) { |
| SLOGE("Cannot setup encryption mapping for %d\n", getMountpoint()); |
| return -1; |
| } |
| /* We now have the new sysfs path for the decrypted block device, and the |
| * majore and minor numbers for it. So, create the device, update the |
| * path to the new sysfs path, and continue. |
| */ |
| snprintf(nodepath, |
| sizeof(nodepath), "/dev/block/vold/%d:%d", |
| new_major, new_minor); |
| if (createDeviceNode(nodepath, new_major, new_minor)) { |
| SLOGE("Error making device node '%s' (%s)", nodepath, |
| strerror(errno)); |
| } |
| |
| // Todo: Either create sys filename from nodepath, or pass in bogus path so |
| // vold ignores state changes on this internal device. |
| updateDeviceInfo(nodepath, new_major, new_minor); |
| |
| /* Get the device nodes again, because they just changed */ |
| n = getDeviceNodes((dev_t *) &deviceNodes, 4); |
| if (!n) { |
| SLOGE("Failed to get device nodes (%s)\n", strerror(errno)); |
| return -1; |
| } |
| } |
| |
| for (i = 0; i < n; i++) { |
| char devicePath[255]; |
| |
| sprintf(devicePath, "/dev/block/vold/%d:%d", MAJOR(deviceNodes[i]), |
| MINOR(deviceNodes[i])); |
| |
| SLOGI("%s being considered for volume %s\n", devicePath, getLabel()); |
| |
| errno = 0; |
| setState(Volume::State_Checking); |
| |
| if (Fat::check(devicePath)) { |
| if (errno == ENODATA) { |
| SLOGW("%s does not contain a FAT filesystem\n", devicePath); |
| continue; |
| } |
| errno = EIO; |
| /* Badness - abort the mount */ |
| SLOGE("%s failed FS checks (%s)", devicePath, strerror(errno)); |
| setState(Volume::State_Idle); |
| return -1; |
| } |
| |
| /* |
| * Mount the device on our internal staging mountpoint so we can |
| * muck with it before exposing it to non priviledged users. |
| */ |
| errno = 0; |
| int gid; |
| |
| if (primaryStorage) { |
| // Special case the primary SD card. |
| // For this we grant write access to the SDCARD_RW group. |
| gid = AID_SDCARD_RW; |
| } else { |
| // For secondary external storage we keep things locked up. |
| gid = AID_MEDIA_RW; |
| } |
| if (Fat::doMount(devicePath, "/mnt/secure/staging", false, false, false, |
| AID_SYSTEM, gid, 0702, true)) { |
| SLOGE("%s failed to mount via VFAT (%s)\n", devicePath, strerror(errno)); |
| continue; |
| } |
| |
| SLOGI("Device %s, target %s mounted @ /mnt/secure/staging", devicePath, getMountpoint()); |
| |
| protectFromAutorunStupidity(); |
| |
| // only create android_secure on primary storage |
| if (primaryStorage && createBindMounts()) { |
| SLOGE("Failed to create bindmounts (%s)", strerror(errno)); |
| umount("/mnt/secure/staging"); |
| setState(Volume::State_Idle); |
| return -1; |
| } |
| |
| /* |
| * Now that the bindmount trickery is done, atomically move the |
| * whole subtree to expose it to non priviledged users. |
| */ |
| if (doMoveMount("/mnt/secure/staging", getMountpoint(), false)) { |
| SLOGE("Failed to move mount (%s)", strerror(errno)); |
| umount("/mnt/secure/staging"); |
| setState(Volume::State_Idle); |
| return -1; |
| } |
| setState(Volume::State_Mounted); |
| mCurrentlyMountedKdev = deviceNodes[i]; |
| return 0; |
| } |
| |
| SLOGE("Volume %s found no suitable devices for mounting :(\n", getLabel()); |
| setState(Volume::State_Idle); |
| |
| return -1; |
| } |
| |
| int Volume::createBindMounts() { |
| unsigned long flags; |
| |
| /* |
| * Rename old /android_secure -> /.android_secure |
| */ |
| if (!access("/mnt/secure/staging/android_secure", R_OK | X_OK) && |
| access(SEC_STG_SECIMGDIR, R_OK | X_OK)) { |
| if (rename("/mnt/secure/staging/android_secure", SEC_STG_SECIMGDIR)) { |
| SLOGE("Failed to rename legacy asec dir (%s)", strerror(errno)); |
| } |
| } |
| |
| /* |
| * Ensure that /android_secure exists and is a directory |
| */ |
| if (access(SEC_STG_SECIMGDIR, R_OK | X_OK)) { |
| if (errno == ENOENT) { |
| if (mkdir(SEC_STG_SECIMGDIR, 0777)) { |
| SLOGE("Failed to create %s (%s)", SEC_STG_SECIMGDIR, strerror(errno)); |
| return -1; |
| } |
| } else { |
| SLOGE("Failed to access %s (%s)", SEC_STG_SECIMGDIR, strerror(errno)); |
| return -1; |
| } |
| } else { |
| struct stat sbuf; |
| |
| if (stat(SEC_STG_SECIMGDIR, &sbuf)) { |
| SLOGE("Failed to stat %s (%s)", SEC_STG_SECIMGDIR, strerror(errno)); |
| return -1; |
| } |
| if (!S_ISDIR(sbuf.st_mode)) { |
| SLOGE("%s is not a directory", SEC_STG_SECIMGDIR); |
| errno = ENOTDIR; |
| return -1; |
| } |
| } |
| |
| /* |
| * Bind mount /mnt/secure/staging/android_secure -> /mnt/secure/asec so we'll |
| * have a root only accessable mountpoint for it. |
| */ |
| if (mount(SEC_STG_SECIMGDIR, SEC_ASECDIR_EXT, "", MS_BIND, NULL)) { |
| SLOGE("Failed to bind mount points %s -> %s (%s)", |
| SEC_STG_SECIMGDIR, SEC_ASECDIR_EXT, strerror(errno)); |
| return -1; |
| } |
| |
| /* |
| * Mount a read-only, zero-sized tmpfs on <mountpoint>/android_secure to |
| * obscure the underlying directory from everybody - sneaky eh? ;) |
| */ |
| if (mount("tmpfs", SEC_STG_SECIMGDIR, "tmpfs", MS_RDONLY, "size=0,mode=000,uid=0,gid=0")) { |
| SLOGE("Failed to obscure %s (%s)", SEC_STG_SECIMGDIR, strerror(errno)); |
| umount("/mnt/asec_secure"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| int Volume::doMoveMount(const char *src, const char *dst, bool force) { |
| unsigned int flags = MS_MOVE; |
| int retries = 5; |
| |
| while(retries--) { |
| if (!mount(src, dst, "", flags, NULL)) { |
| if (mDebug) { |
| SLOGD("Moved mount %s -> %s sucessfully", src, dst); |
| } |
| return 0; |
| } else if (errno != EBUSY) { |
| SLOGE("Failed to move mount %s -> %s (%s)", src, dst, strerror(errno)); |
| return -1; |
| } |
| int action = 0; |
| |
| if (force) { |
| if (retries == 1) { |
| action = 2; // SIGKILL |
| } else if (retries == 2) { |
| action = 1; // SIGHUP |
| } |
| } |
| SLOGW("Failed to move %s -> %s (%s, retries %d, action %d)", |
| src, dst, strerror(errno), retries, action); |
| Process::killProcessesWithOpenFiles(src, action); |
| usleep(1000*250); |
| } |
| |
| errno = EBUSY; |
| SLOGE("Giving up on move %s -> %s (%s)", src, dst, strerror(errno)); |
| return -1; |
| } |
| |
| int Volume::doUnmount(const char *path, bool force) { |
| int retries = 10; |
| |
| if (mDebug) { |
| SLOGD("Unmounting {%s}, force = %d", path, force); |
| } |
| |
| while (retries--) { |
| if (!umount(path) || errno == EINVAL || errno == ENOENT) { |
| SLOGI("%s sucessfully unmounted", path); |
| return 0; |
| } |
| |
| int action = 0; |
| |
| if (force) { |
| if (retries == 1) { |
| action = 2; // SIGKILL |
| } else if (retries == 2) { |
| action = 1; // SIGHUP |
| } |
| } |
| |
| SLOGW("Failed to unmount %s (%s, retries %d, action %d)", |
| path, strerror(errno), retries, action); |
| |
| Process::killProcessesWithOpenFiles(path, action); |
| usleep(1000*1000); |
| } |
| errno = EBUSY; |
| SLOGE("Giving up on unmount %s (%s)", path, strerror(errno)); |
| return -1; |
| } |
| |
| int Volume::unmountVol(bool force, bool revert) { |
| int i, rc; |
| |
| if (getState() != Volume::State_Mounted) { |
| SLOGE("Volume %s unmount request when not mounted", getLabel()); |
| errno = EINVAL; |
| return UNMOUNT_NOT_MOUNTED_ERR; |
| } |
| |
| setState(Volume::State_Unmounting); |
| usleep(1000 * 1000); // Give the framework some time to react |
| |
| /* |
| * Remove the bindmount we were using to keep a reference to |
| * the previously obscured directory. |
| */ |
| if (doUnmount(Volume::SEC_ASECDIR_EXT, force)) { |
| SLOGE("Failed to remove bindmount on %s (%s)", SEC_ASECDIR_EXT, strerror(errno)); |
| goto fail_remount_tmpfs; |
| } |
| |
| /* |
| * Unmount the tmpfs which was obscuring the asec image directory |
| * from non root users |
| */ |
| char secure_dir[PATH_MAX]; |
| snprintf(secure_dir, PATH_MAX, "%s/.android_secure", getMountpoint()); |
| if (doUnmount(secure_dir, force)) { |
| SLOGE("Failed to unmount tmpfs on %s (%s)", secure_dir, strerror(errno)); |
| goto fail_republish; |
| } |
| |
| /* |
| * Finally, unmount the actual block device from the staging dir |
| */ |
| if (doUnmount(getMountpoint(), force)) { |
| SLOGE("Failed to unmount %s (%s)", SEC_STGDIR, strerror(errno)); |
| goto fail_recreate_bindmount; |
| } |
| |
| SLOGI("%s unmounted sucessfully", getMountpoint()); |
| |
| /* If this is an encrypted volume, and we've been asked to undo |
| * the crypto mapping, then revert the dm-crypt mapping, and revert |
| * the device info to the original values. |
| */ |
| if (revert && isDecrypted()) { |
| cryptfs_revert_volume(getLabel()); |
| revertDeviceInfo(); |
| SLOGI("Encrypted volume %s reverted successfully", getMountpoint()); |
| } |
| |
| setState(Volume::State_Idle); |
| mCurrentlyMountedKdev = -1; |
| return 0; |
| |
| /* |
| * Failure handling - try to restore everything back the way it was |
| */ |
| fail_recreate_bindmount: |
| if (mount(SEC_STG_SECIMGDIR, SEC_ASECDIR_EXT, "", MS_BIND, NULL)) { |
| SLOGE("Failed to restore bindmount after failure! - Storage will appear offline!"); |
| goto out_nomedia; |
| } |
| fail_remount_tmpfs: |
| if (mount("tmpfs", SEC_STG_SECIMGDIR, "tmpfs", MS_RDONLY, "size=0,mode=0,uid=0,gid=0")) { |
| SLOGE("Failed to restore tmpfs after failure! - Storage will appear offline!"); |
| goto out_nomedia; |
| } |
| fail_republish: |
| if (doMoveMount(SEC_STGDIR, getMountpoint(), force)) { |
| SLOGE("Failed to republish mount after failure! - Storage will appear offline!"); |
| goto out_nomedia; |
| } |
| |
| setState(Volume::State_Mounted); |
| return -1; |
| |
| out_nomedia: |
| setState(Volume::State_NoMedia); |
| return -1; |
| } |
| int Volume::initializeMbr(const char *deviceNode) { |
| struct disk_info dinfo; |
| |
| memset(&dinfo, 0, sizeof(dinfo)); |
| |
| if (!(dinfo.part_lst = (struct part_info *) malloc(MAX_NUM_PARTS * sizeof(struct part_info)))) { |
| SLOGE("Failed to malloc prt_lst"); |
| return -1; |
| } |
| |
| memset(dinfo.part_lst, 0, MAX_NUM_PARTS * sizeof(struct part_info)); |
| dinfo.device = strdup(deviceNode); |
| dinfo.scheme = PART_SCHEME_MBR; |
| dinfo.sect_size = 512; |
| dinfo.skip_lba = 2048; |
| dinfo.num_lba = 0; |
| dinfo.num_parts = 1; |
| |
| struct part_info *pinfo = &dinfo.part_lst[0]; |
| |
| pinfo->name = strdup("android_sdcard"); |
| pinfo->flags |= PART_ACTIVE_FLAG; |
| pinfo->type = PC_PART_TYPE_FAT32; |
| pinfo->len_kb = -1; |
| |
| int rc = apply_disk_config(&dinfo, 0); |
| |
| if (rc) { |
| SLOGE("Failed to apply disk configuration (%d)", rc); |
| goto out; |
| } |
| |
| out: |
| free(pinfo->name); |
| free(dinfo.device); |
| free(dinfo.part_lst); |
| |
| return rc; |
| } |