| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <fcntl.h> |
| #include <unistd.h> |
| #include <errno.h> |
| #include <string.h> |
| |
| #include <sys/mount.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <sys/ioctl.h> |
| |
| #include <linux/kdev_t.h> |
| |
| #define LOG_TAG "Vold" |
| |
| #include <cutils/log.h> |
| |
| #include <sysutils/SocketClient.h> |
| #include "Loop.h" |
| #include "Asec.h" |
| |
| int Loop::dumpState(SocketClient *c) { |
| int i; |
| int fd; |
| char filename[256]; |
| |
| for (i = 0; i < LOOP_MAX; i++) { |
| struct loop_info64 li; |
| int rc; |
| |
| sprintf(filename, "/dev/block/loop%d", i); |
| |
| if ((fd = open(filename, O_RDWR)) < 0) { |
| if (errno != ENOENT) { |
| SLOGE("Unable to open %s (%s)", filename, strerror(errno)); |
| } else { |
| continue; |
| } |
| return -1; |
| } |
| |
| rc = ioctl(fd, LOOP_GET_STATUS64, &li); |
| close(fd); |
| if (rc < 0 && errno == ENXIO) { |
| continue; |
| } |
| |
| if (rc < 0) { |
| SLOGE("Unable to get loop status for %s (%s)", filename, |
| strerror(errno)); |
| return -1; |
| } |
| char *tmp = NULL; |
| asprintf(&tmp, "%s %d %lld:%lld %llu %lld:%lld %lld 0x%x {%s} {%s}", filename, li.lo_number, |
| MAJOR(li.lo_device), MINOR(li.lo_device), li.lo_inode, MAJOR(li.lo_rdevice), |
| MINOR(li.lo_rdevice), li.lo_offset, li.lo_flags, li.lo_crypt_name, |
| li.lo_file_name); |
| c->sendMsg(0, tmp, false); |
| free(tmp); |
| } |
| return 0; |
| } |
| |
| int Loop::lookupActive(const char *id, char *buffer, size_t len) { |
| int i; |
| int fd; |
| char filename[256]; |
| |
| memset(buffer, 0, len); |
| |
| for (i = 0; i < LOOP_MAX; i++) { |
| struct loop_info64 li; |
| int rc; |
| |
| sprintf(filename, "/dev/block/loop%d", i); |
| |
| if ((fd = open(filename, O_RDWR)) < 0) { |
| if (errno != ENOENT) { |
| SLOGE("Unable to open %s (%s)", filename, strerror(errno)); |
| } else { |
| continue; |
| } |
| return -1; |
| } |
| |
| rc = ioctl(fd, LOOP_GET_STATUS64, &li); |
| close(fd); |
| if (rc < 0 && errno == ENXIO) { |
| continue; |
| } |
| |
| if (rc < 0) { |
| SLOGE("Unable to get loop status for %s (%s)", filename, |
| strerror(errno)); |
| return -1; |
| } |
| if (!strncmp((const char*) li.lo_crypt_name, id, LO_NAME_SIZE)) { |
| break; |
| } |
| } |
| |
| if (i == LOOP_MAX) { |
| errno = ENOENT; |
| return -1; |
| } |
| strncpy(buffer, filename, len -1); |
| return 0; |
| } |
| |
| int Loop::create(const char *id, const char *loopFile, char *loopDeviceBuffer, size_t len) { |
| int i; |
| int fd; |
| char filename[256]; |
| |
| for (i = 0; i < LOOP_MAX; i++) { |
| struct loop_info64 li; |
| int rc; |
| |
| sprintf(filename, "/dev/block/loop%d", i); |
| |
| /* |
| * The kernel starts us off with 8 loop nodes, but more |
| * are created on-demand if needed. |
| */ |
| mode_t mode = 0660 | S_IFBLK; |
| unsigned int dev = (0xff & i) | ((i << 12) & 0xfff00000) | (7 << 8); |
| if (mknod(filename, mode, dev) < 0) { |
| if (errno != EEXIST) { |
| SLOGE("Error creating loop device node (%s)", strerror(errno)); |
| return -1; |
| } |
| } |
| |
| if ((fd = open(filename, O_RDWR)) < 0) { |
| SLOGE("Unable to open %s (%s)", filename, strerror(errno)); |
| return -1; |
| } |
| |
| rc = ioctl(fd, LOOP_GET_STATUS64, &li); |
| if (rc < 0 && errno == ENXIO) |
| break; |
| |
| close(fd); |
| |
| if (rc < 0) { |
| SLOGE("Unable to get loop status for %s (%s)", filename, |
| strerror(errno)); |
| return -1; |
| } |
| } |
| |
| if (i == LOOP_MAX) { |
| SLOGE("Exhausted all loop devices"); |
| errno = ENOSPC; |
| return -1; |
| } |
| |
| strncpy(loopDeviceBuffer, filename, len -1); |
| |
| int file_fd; |
| |
| if ((file_fd = open(loopFile, O_RDWR)) < 0) { |
| SLOGE("Unable to open %s (%s)", loopFile, strerror(errno)); |
| close(fd); |
| return -1; |
| } |
| |
| if (ioctl(fd, LOOP_SET_FD, file_fd) < 0) { |
| SLOGE("Error setting up loopback interface (%s)", strerror(errno)); |
| close(file_fd); |
| close(fd); |
| return -1; |
| } |
| |
| struct loop_info64 li; |
| |
| memset(&li, 0, sizeof(li)); |
| strlcpy((char*) li.lo_crypt_name, id, LO_NAME_SIZE); |
| strlcpy((char*) li.lo_file_name, loopFile, LO_NAME_SIZE); |
| |
| if (ioctl(fd, LOOP_SET_STATUS64, &li) < 0) { |
| SLOGE("Error setting loopback status (%s)", strerror(errno)); |
| close(file_fd); |
| close(fd); |
| return -1; |
| } |
| |
| close(fd); |
| close(file_fd); |
| |
| return 0; |
| } |
| |
| int Loop::destroyByDevice(const char *loopDevice) { |
| int device_fd; |
| |
| device_fd = open(loopDevice, O_RDONLY); |
| if (device_fd < 0) { |
| SLOGE("Failed to open loop (%d)", errno); |
| return -1; |
| } |
| |
| if (ioctl(device_fd, LOOP_CLR_FD, 0) < 0) { |
| SLOGE("Failed to destroy loop (%d)", errno); |
| close(device_fd); |
| return -1; |
| } |
| |
| close(device_fd); |
| return 0; |
| } |
| |
| int Loop::destroyByFile(const char *loopFile) { |
| errno = ENOSYS; |
| return -1; |
| } |
| |
| int Loop::createImageFile(const char *file, unsigned int numSectors) { |
| int fd; |
| |
| if ((fd = creat(file, 0600)) < 0) { |
| SLOGE("Error creating imagefile (%s)", strerror(errno)); |
| return -1; |
| } |
| |
| if (ftruncate(fd, numSectors * 512) < 0) { |
| SLOGE("Error truncating imagefile (%s)", strerror(errno)); |
| close(fd); |
| return -1; |
| } |
| close(fd); |
| return 0; |
| } |
| |
| int Loop::lookupInfo(const char *loopDevice, struct asec_superblock *sb, unsigned int *nr_sec) { |
| int fd; |
| struct asec_superblock buffer; |
| |
| if ((fd = open(loopDevice, O_RDONLY)) < 0) { |
| SLOGE("Failed to open loopdevice (%s)", strerror(errno)); |
| destroyByDevice(loopDevice); |
| return -1; |
| } |
| |
| if (ioctl(fd, BLKGETSIZE, nr_sec)) { |
| SLOGE("Failed to get loop size (%s)", strerror(errno)); |
| destroyByDevice(loopDevice); |
| close(fd); |
| return -1; |
| } |
| |
| /* |
| * Try to read superblock. |
| */ |
| memset(&buffer, 0, sizeof(struct asec_superblock)); |
| if (lseek(fd, ((*nr_sec - 1) * 512), SEEK_SET) < 0) { |
| SLOGE("lseek failed (%s)", strerror(errno)); |
| close(fd); |
| destroyByDevice(loopDevice); |
| return -1; |
| } |
| if (read(fd, &buffer, sizeof(struct asec_superblock)) != sizeof(struct asec_superblock)) { |
| SLOGE("superblock read failed (%s)", strerror(errno)); |
| close(fd); |
| destroyByDevice(loopDevice); |
| return -1; |
| } |
| close(fd); |
| |
| /* |
| * Superblock successfully read. Copy to caller's struct. |
| */ |
| memcpy(sb, &buffer, sizeof(struct asec_superblock)); |
| return 0; |
| } |