| /* |
| * Freescale i.MX28 Power Controller Register Definitions |
| * |
| * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #ifndef __MX28_REGS_POWER_H__ |
| #define __MX28_REGS_POWER_H__ |
| |
| #include <asm/arch/regs-common.h> |
| |
| #ifndef __ASSEMBLY__ |
| struct mxs_power_regs { |
| mxs_reg_32(hw_power_ctrl) |
| mxs_reg_32(hw_power_5vctrl) |
| mxs_reg_32(hw_power_minpwr) |
| mxs_reg_32(hw_power_charge) |
| uint32_t hw_power_vdddctrl; |
| uint32_t reserved_vddd[3]; |
| uint32_t hw_power_vddactrl; |
| uint32_t reserved_vdda[3]; |
| uint32_t hw_power_vddioctrl; |
| uint32_t reserved_vddio[3]; |
| uint32_t hw_power_vddmemctrl; |
| uint32_t reserved_vddmem[3]; |
| uint32_t hw_power_dcdc4p2; |
| uint32_t reserved_dcdc4p2[3]; |
| uint32_t hw_power_misc; |
| uint32_t reserved_misc[3]; |
| uint32_t hw_power_dclimits; |
| uint32_t reserved_dclimits[3]; |
| mxs_reg_32(hw_power_loopctrl) |
| uint32_t hw_power_sts; |
| uint32_t reserved_sts[3]; |
| mxs_reg_32(hw_power_speed) |
| uint32_t hw_power_battmonitor; |
| uint32_t reserved_battmonitor[3]; |
| |
| uint32_t reserved[4]; |
| |
| mxs_reg_32(hw_power_reset) |
| mxs_reg_32(hw_power_debug) |
| mxs_reg_32(hw_power_thermal) |
| mxs_reg_32(hw_power_usb1ctrl) |
| mxs_reg_32(hw_power_special) |
| mxs_reg_32(hw_power_version) |
| mxs_reg_32(hw_power_anaclkctrl) |
| mxs_reg_32(hw_power_refctrl) |
| }; |
| #endif |
| |
| #define POWER_CTRL_PSWITCH_MID_TRAN (1 << 27) |
| #define POWER_CTRL_DCDC4P2_BO_IRQ (1 << 24) |
| #define POWER_CTRL_ENIRQ_DCDC4P2_BO (1 << 23) |
| #define POWER_CTRL_VDD5V_DROOP_IRQ (1 << 22) |
| #define POWER_CTRL_ENIRQ_VDD5V_DROOP (1 << 21) |
| #define POWER_CTRL_PSWITCH_IRQ (1 << 20) |
| #define POWER_CTRL_PSWITCH_IRQ_SRC (1 << 19) |
| #define POWER_CTRL_POLARITY_PSWITCH (1 << 18) |
| #define POWER_CTRL_ENIRQ_PSWITCH (1 << 17) |
| #define POWER_CTRL_POLARITY_DC_OK (1 << 16) |
| #define POWER_CTRL_DC_OK_IRQ (1 << 15) |
| #define POWER_CTRL_ENIRQ_DC_OK (1 << 14) |
| #define POWER_CTRL_BATT_BO_IRQ (1 << 13) |
| #define POWER_CTRL_ENIRQ_BATT_BO (1 << 12) |
| #define POWER_CTRL_VDDIO_BO_IRQ (1 << 11) |
| #define POWER_CTRL_ENIRQ_VDDIO_BO (1 << 10) |
| #define POWER_CTRL_VDDA_BO_IRQ (1 << 9) |
| #define POWER_CTRL_ENIRQ_VDDA_BO (1 << 8) |
| #define POWER_CTRL_VDDD_BO_IRQ (1 << 7) |
| #define POWER_CTRL_ENIRQ_VDDD_BO (1 << 6) |
| #define POWER_CTRL_POLARITY_VBUSVALID (1 << 5) |
| #define POWER_CTRL_VBUS_VALID_IRQ (1 << 4) |
| #define POWER_CTRL_ENIRQ_VBUS_VALID (1 << 3) |
| #define POWER_CTRL_POLARITY_VDD5V_GT_VDDIO (1 << 2) |
| #define POWER_CTRL_VDD5V_GT_VDDIO_IRQ (1 << 1) |
| #define POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO (1 << 0) |
| |
| #define POWER_5VCTRL_VBUSDROOP_TRSH_MASK (0x3 << 30) |
| #define POWER_5VCTRL_VBUSDROOP_TRSH_OFFSET 30 |
| #define POWER_5VCTRL_VBUSDROOP_TRSH_4V3 (0x0 << 30) |
| #define POWER_5VCTRL_VBUSDROOP_TRSH_4V4 (0x1 << 30) |
| #define POWER_5VCTRL_VBUSDROOP_TRSH_4V5 (0x2 << 30) |
| #define POWER_5VCTRL_VBUSDROOP_TRSH_4V7 (0x3 << 30) |
| #define POWER_5VCTRL_HEADROOM_ADJ_MASK (0x7 << 24) |
| #define POWER_5VCTRL_HEADROOM_ADJ_OFFSET 24 |
| #define POWER_5VCTRL_PWD_CHARGE_4P2_MASK (0x3 << 20) |
| #define POWER_5VCTRL_PWD_CHARGE_4P2_OFFSET 20 |
| #define POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK (0x3f << 12) |
| #define POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET 12 |
| #define POWER_5VCTRL_VBUSVALID_TRSH_MASK (0x7 << 8) |
| #define POWER_5VCTRL_VBUSVALID_TRSH_OFFSET 8 |
| #define POWER_5VCTRL_VBUSVALID_TRSH_2V9 (0x0 << 8) |
| #define POWER_5VCTRL_VBUSVALID_TRSH_4V0 (0x1 << 8) |
| #define POWER_5VCTRL_VBUSVALID_TRSH_4V1 (0x2 << 8) |
| #define POWER_5VCTRL_VBUSVALID_TRSH_4V2 (0x3 << 8) |
| #define POWER_5VCTRL_VBUSVALID_TRSH_4V3 (0x4 << 8) |
| #define POWER_5VCTRL_VBUSVALID_TRSH_4V4 (0x5 << 8) |
| #define POWER_5VCTRL_VBUSVALID_TRSH_4V5 (0x6 << 8) |
| #define POWER_5VCTRL_VBUSVALID_TRSH_4V6 (0x7 << 8) |
| #define POWER_5VCTRL_PWDN_5VBRNOUT (1 << 7) |
| #define POWER_5VCTRL_ENABLE_LINREG_ILIMIT (1 << 6) |
| #define POWER_5VCTRL_DCDC_XFER (1 << 5) |
| #define POWER_5VCTRL_VBUSVALID_5VDETECT (1 << 4) |
| #define POWER_5VCTRL_VBUSVALID_TO_B (1 << 3) |
| #define POWER_5VCTRL_ILIMIT_EQ_ZERO (1 << 2) |
| #define POWER_5VCTRL_PWRUP_VBUS_CMPS (1 << 1) |
| #define POWER_5VCTRL_ENABLE_DCDC (1 << 0) |
| |
| #define POWER_MINPWR_LOWPWR_4P2 (1 << 14) |
| #define POWER_MINPWR_PWD_BO (1 << 12) |
| #define POWER_MINPWR_USE_VDDXTAL_VBG (1 << 11) |
| #define POWER_MINPWR_PWD_ANA_CMPS (1 << 10) |
| #define POWER_MINPWR_ENABLE_OSC (1 << 9) |
| #define POWER_MINPWR_SELECT_OSC (1 << 8) |
| #define POWER_MINPWR_FBG_OFF (1 << 7) |
| #define POWER_MINPWR_DOUBLE_FETS (1 << 6) |
| #define POWER_MINPWR_HALFFETS (1 << 5) |
| #define POWER_MINPWR_LESSANA_I (1 << 4) |
| #define POWER_MINPWR_PWD_XTAL24 (1 << 3) |
| #define POWER_MINPWR_DC_STOPCLK (1 << 2) |
| #define POWER_MINPWR_EN_DC_PFM (1 << 1) |
| #define POWER_MINPWR_DC_HALFCLK (1 << 0) |
| |
| #define POWER_CHARGE_ADJ_VOLT_MASK (0x7 << 24) |
| #define POWER_CHARGE_ADJ_VOLT_OFFSET 24 |
| #define POWER_CHARGE_ADJ_VOLT_M025P (0x1 << 24) |
| #define POWER_CHARGE_ADJ_VOLT_P050P (0x2 << 24) |
| #define POWER_CHARGE_ADJ_VOLT_M075P (0x3 << 24) |
| #define POWER_CHARGE_ADJ_VOLT_P025P (0x4 << 24) |
| #define POWER_CHARGE_ADJ_VOLT_M050P (0x5 << 24) |
| #define POWER_CHARGE_ADJ_VOLT_P075P (0x6 << 24) |
| #define POWER_CHARGE_ADJ_VOLT_M100P (0x7 << 24) |
| #define POWER_CHARGE_ENABLE_LOAD (1 << 22) |
| #define POWER_CHARGE_ENABLE_FAULT_DETECT (1 << 20) |
| #define POWER_CHARGE_CHRG_STS_OFF (1 << 19) |
| #define POWER_CHARGE_LIION_4P1 (1 << 18) |
| #define POWER_CHARGE_PWD_BATTCHRG (1 << 16) |
| #define POWER_CHARGE_ENABLE_CHARGER_USB1 (1 << 13) |
| #define POWER_CHARGE_ENABLE_CHARGER_USB0 (1 << 12) |
| #define POWER_CHARGE_STOP_ILIMIT_MASK (0xf << 8) |
| #define POWER_CHARGE_STOP_ILIMIT_OFFSET 8 |
| #define POWER_CHARGE_STOP_ILIMIT_10MA (0x1 << 8) |
| #define POWER_CHARGE_STOP_ILIMIT_20MA (0x2 << 8) |
| #define POWER_CHARGE_STOP_ILIMIT_50MA (0x4 << 8) |
| #define POWER_CHARGE_STOP_ILIMIT_100MA (0x8 << 8) |
| #define POWER_CHARGE_BATTCHRG_I_MASK 0x3f |
| #define POWER_CHARGE_BATTCHRG_I_OFFSET 0 |
| #define POWER_CHARGE_BATTCHRG_I_10MA 0x01 |
| #define POWER_CHARGE_BATTCHRG_I_20MA 0x02 |
| #define POWER_CHARGE_BATTCHRG_I_50MA 0x04 |
| #define POWER_CHARGE_BATTCHRG_I_100MA 0x08 |
| #define POWER_CHARGE_BATTCHRG_I_200MA 0x10 |
| #define POWER_CHARGE_BATTCHRG_I_400MA 0x20 |
| |
| #define POWER_VDDDCTRL_ADJTN_MASK (0xf << 28) |
| #define POWER_VDDDCTRL_ADJTN_OFFSET 28 |
| #define POWER_VDDDCTRL_PWDN_BRNOUT (1 << 23) |
| #define POWER_VDDDCTRL_DISABLE_STEPPING (1 << 22) |
| #define POWER_VDDDCTRL_ENABLE_LINREG (1 << 21) |
| #define POWER_VDDDCTRL_DISABLE_FET (1 << 20) |
| #define POWER_VDDDCTRL_LINREG_OFFSET_MASK (0x3 << 16) |
| #define POWER_VDDDCTRL_LINREG_OFFSET_OFFSET 16 |
| #define POWER_VDDDCTRL_LINREG_OFFSET_0STEPS (0x0 << 16) |
| #define POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 16) |
| #define POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 16) |
| #define POWER_VDDDCTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 16) |
| #define POWER_VDDDCTRL_BO_OFFSET_MASK (0x7 << 8) |
| #define POWER_VDDDCTRL_BO_OFFSET_OFFSET 8 |
| #define POWER_VDDDCTRL_TRG_MASK 0x1f |
| #define POWER_VDDDCTRL_TRG_OFFSET 0 |
| |
| #define POWER_VDDACTRL_PWDN_BRNOUT (1 << 19) |
| #define POWER_VDDACTRL_DISABLE_STEPPING (1 << 18) |
| #define POWER_VDDACTRL_ENABLE_LINREG (1 << 17) |
| #define POWER_VDDACTRL_DISABLE_FET (1 << 16) |
| #define POWER_VDDACTRL_LINREG_OFFSET_MASK (0x3 << 12) |
| #define POWER_VDDACTRL_LINREG_OFFSET_OFFSET 12 |
| #define POWER_VDDACTRL_LINREG_OFFSET_0STEPS (0x0 << 12) |
| #define POWER_VDDACTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 12) |
| #define POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 12) |
| #define POWER_VDDACTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 12) |
| #define POWER_VDDACTRL_BO_OFFSET_MASK (0x7 << 8) |
| #define POWER_VDDACTRL_BO_OFFSET_OFFSET 8 |
| #define POWER_VDDACTRL_TRG_MASK 0x1f |
| #define POWER_VDDACTRL_TRG_OFFSET 0 |
| |
| #define POWER_VDDIOCTRL_ADJTN_MASK (0xf << 20) |
| #define POWER_VDDIOCTRL_ADJTN_OFFSET 20 |
| #define POWER_VDDIOCTRL_PWDN_BRNOUT (1 << 18) |
| #define POWER_VDDIOCTRL_DISABLE_STEPPING (1 << 17) |
| #define POWER_VDDIOCTRL_DISABLE_FET (1 << 16) |
| #define POWER_VDDIOCTRL_LINREG_OFFSET_MASK (0x3 << 12) |
| #define POWER_VDDIOCTRL_LINREG_OFFSET_OFFSET 12 |
| #define POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS (0x0 << 12) |
| #define POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 12) |
| #define POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 12) |
| #define POWER_VDDIOCTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 12) |
| #define POWER_VDDIOCTRL_BO_OFFSET_MASK (0x7 << 8) |
| #define POWER_VDDIOCTRL_BO_OFFSET_OFFSET 8 |
| #define POWER_VDDIOCTRL_TRG_MASK 0x1f |
| #define POWER_VDDIOCTRL_TRG_OFFSET 0 |
| |
| #define POWER_VDDMEMCTRL_PULLDOWN_ACTIVE (1 << 10) |
| #define POWER_VDDMEMCTRL_ENABLE_ILIMIT (1 << 9) |
| #define POWER_VDDMEMCTRL_ENABLE_LINREG (1 << 8) |
| #define POWER_VDDMEMCTRL_BO_OFFSET_MASK (0x7 << 5) |
| #define POWER_VDDMEMCTRL_BO_OFFSET_OFFSET 5 |
| #define POWER_VDDMEMCTRL_TRG_MASK 0x1f |
| #define POWER_VDDMEMCTRL_TRG_OFFSET 0 |
| |
| #define POWER_DCDC4P2_DROPOUT_CTRL_MASK (0xf << 28) |
| #define POWER_DCDC4P2_DROPOUT_CTRL_OFFSET 28 |
| #define POWER_DCDC4P2_DROPOUT_CTRL_200MV (0x3 << 30) |
| #define POWER_DCDC4P2_DROPOUT_CTRL_100MV (0x2 << 30) |
| #define POWER_DCDC4P2_DROPOUT_CTRL_50MV (0x1 << 30) |
| #define POWER_DCDC4P2_DROPOUT_CTRL_25MV (0x0 << 30) |
| #define POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2 (0x0 << 28) |
| #define POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2_LT_BATT (0x1 << 28) |
| #define POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL (0x2 << 28) |
| #define POWER_DCDC4P2_ISTEAL_THRESH_MASK (0x3 << 24) |
| #define POWER_DCDC4P2_ISTEAL_THRESH_OFFSET 24 |
| #define POWER_DCDC4P2_ENABLE_4P2 (1 << 23) |
| #define POWER_DCDC4P2_ENABLE_DCDC (1 << 22) |
| #define POWER_DCDC4P2_HYST_DIR (1 << 21) |
| #define POWER_DCDC4P2_HYST_THRESH (1 << 20) |
| #define POWER_DCDC4P2_TRG_MASK (0x7 << 16) |
| #define POWER_DCDC4P2_TRG_OFFSET 16 |
| #define POWER_DCDC4P2_TRG_4V2 (0x0 << 16) |
| #define POWER_DCDC4P2_TRG_4V1 (0x1 << 16) |
| #define POWER_DCDC4P2_TRG_4V0 (0x2 << 16) |
| #define POWER_DCDC4P2_TRG_3V9 (0x3 << 16) |
| #define POWER_DCDC4P2_TRG_BATT (0x4 << 16) |
| #define POWER_DCDC4P2_BO_MASK (0x1f << 8) |
| #define POWER_DCDC4P2_BO_OFFSET 8 |
| #define POWER_DCDC4P2_CMPTRIP_MASK 0x1f |
| #define POWER_DCDC4P2_CMPTRIP_OFFSET 0 |
| |
| #define POWER_MISC_FREQSEL_MASK (0x7 << 4) |
| #define POWER_MISC_FREQSEL_OFFSET 4 |
| #define POWER_MISC_FREQSEL_20MHZ (0x1 << 4) |
| #define POWER_MISC_FREQSEL_24MHZ (0x2 << 4) |
| #define POWER_MISC_FREQSEL_19MHZ (0x3 << 4) |
| #define POWER_MISC_FREQSEL_14MHZ (0x4 << 4) |
| #define POWER_MISC_FREQSEL_18MHZ (0x5 << 4) |
| #define POWER_MISC_FREQSEL_21MHZ (0x6 << 4) |
| #define POWER_MISC_FREQSEL_17MHZ (0x7 << 4) |
| #define POWER_MISC_DISABLE_FET_BO_LOGIC (1 << 3) |
| #define POWER_MISC_DELAY_TIMING (1 << 2) |
| #define POWER_MISC_TEST (1 << 1) |
| #define POWER_MISC_SEL_PLLCLK (1 << 0) |
| |
| #define POWER_DCLIMITS_POSLIMIT_BUCK_MASK (0x7f << 8) |
| #define POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET 8 |
| #define POWER_DCLIMITS_NEGLIMIT_MASK 0x7f |
| #define POWER_DCLIMITS_NETLIMIT_OFFSET 0 |
| |
| #define POWER_LOOPCTRL_TOGGLE_DIF (1 << 20) |
| #define POWER_LOOPCTRL_HYST_SIGN (1 << 19) |
| #define POWER_LOOPCTRL_EN_CM_HYST (1 << 18) |
| #define POWER_LOOPCTRL_EN_DF_HYST (1 << 17) |
| #define POWER_LOOPCTRL_CM_HYST_THRESH (1 << 16) |
| #define POWER_LOOPCTRL_DF_HYST_THRESH (1 << 15) |
| #define POWER_LOOPCTRL_RCSCALE_THRESH (1 << 14) |
| #define POWER_LOOPCTRL_EN_RCSCALE_MASK (0x3 << 12) |
| #define POWER_LOOPCTRL_EN_RCSCALE_OFFSET 12 |
| #define POWER_LOOPCTRL_EN_RCSCALE_DIS (0x0 << 12) |
| #define POWER_LOOPCTRL_EN_RCSCALE_2X (0x1 << 12) |
| #define POWER_LOOPCTRL_EN_RCSCALE_4X (0x2 << 12) |
| #define POWER_LOOPCTRL_EN_RCSCALE_8X (0x3 << 12) |
| #define POWER_LOOPCTRL_DC_FF_MASK (0x7 << 8) |
| #define POWER_LOOPCTRL_DC_FF_OFFSET 8 |
| #define POWER_LOOPCTRL_DC_R_MASK (0xf << 4) |
| #define POWER_LOOPCTRL_DC_R_OFFSET 4 |
| #define POWER_LOOPCTRL_DC_C_MASK 0x3 |
| #define POWER_LOOPCTRL_DC_C_OFFSET 0 |
| #define POWER_LOOPCTRL_DC_C_MAX 0x0 |
| #define POWER_LOOPCTRL_DC_C_2X 0x1 |
| #define POWER_LOOPCTRL_DC_C_4X 0x2 |
| #define POWER_LOOPCTRL_DC_C_MIN 0x3 |
| |
| #define POWER_STS_PWRUP_SOURCE_MASK (0x3f << 24) |
| #define POWER_STS_PWRUP_SOURCE_OFFSET 24 |
| #define POWER_STS_PWRUP_SOURCE_5V (0x20 << 24) |
| #define POWER_STS_PWRUP_SOURCE_RTC (0x10 << 24) |
| #define POWER_STS_PWRUP_SOURCE_PSWITCH_HIGH (0x02 << 24) |
| #define POWER_STS_PWRUP_SOURCE_PSWITCH_MID (0x01 << 24) |
| #define POWER_STS_PSWITCH_MASK (0x3 << 20) |
| #define POWER_STS_PSWITCH_OFFSET 20 |
| #define POWER_STS_THERMAL_WARNING (1 << 19) |
| #define POWER_STS_VDDMEM_BO (1 << 18) |
| #define POWER_STS_AVALID0_STATUS (1 << 17) |
| #define POWER_STS_BVALID0_STATUS (1 << 16) |
| #define POWER_STS_VBUSVALID0_STATUS (1 << 15) |
| #define POWER_STS_SESSEND0_STATUS (1 << 14) |
| #define POWER_STS_BATT_BO (1 << 13) |
| #define POWER_STS_VDD5V_FAULT (1 << 12) |
| #define POWER_STS_CHRGSTS (1 << 11) |
| #define POWER_STS_DCDC_4P2_BO (1 << 10) |
| #define POWER_STS_DC_OK (1 << 9) |
| #define POWER_STS_VDDIO_BO (1 << 8) |
| #define POWER_STS_VDDA_BO (1 << 7) |
| #define POWER_STS_VDDD_BO (1 << 6) |
| #define POWER_STS_VDD5V_GT_VDDIO (1 << 5) |
| #define POWER_STS_VDD5V_DROOP (1 << 4) |
| #define POWER_STS_AVALID0 (1 << 3) |
| #define POWER_STS_BVALID0 (1 << 2) |
| #define POWER_STS_VBUSVALID0 (1 << 1) |
| #define POWER_STS_SESSEND0 (1 << 0) |
| |
| #define POWER_SPEED_STATUS_MASK (0xffff << 8) |
| #define POWER_SPEED_STATUS_OFFSET 8 |
| #define POWER_SPEED_STATUS_SEL_MASK (0x3 << 6) |
| #define POWER_SPEED_STATUS_SEL_OFFSET 6 |
| #define POWER_SPEED_STATUS_SEL_DCDC_STAT (0x0 << 6) |
| #define POWER_SPEED_STATUS_SEL_CORE_STAT (0x1 << 6) |
| #define POWER_SPEED_STATUS_SEL_ARM_STAT (0x2 << 6) |
| #define POWER_SPEED_CTRL_MASK 0x3 |
| #define POWER_SPEED_CTRL_OFFSET 0 |
| #define POWER_SPEED_CTRL_SS_OFF 0x0 |
| #define POWER_SPEED_CTRL_SS_ON 0x1 |
| #define POWER_SPEED_CTRL_SS_ENABLE 0x3 |
| |
| #define POWER_BATTMONITOR_BATT_VAL_MASK (0x3ff << 16) |
| #define POWER_BATTMONITOR_BATT_VAL_OFFSET 16 |
| #define POWER_BATTMONITOR_PWDN_BATTBRNOUT_5VDETECT_EN (1 << 11) |
| #define POWER_BATTMONITOR_EN_BATADJ (1 << 10) |
| #define POWER_BATTMONITOR_PWDN_BATTBRNOUT (1 << 9) |
| #define POWER_BATTMONITOR_BRWNOUT_PWD (1 << 8) |
| #define POWER_BATTMONITOR_BRWNOUT_LVL_MASK 0x1f |
| #define POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET 0 |
| |
| #define POWER_RESET_UNLOCK_MASK (0xffff << 16) |
| #define POWER_RESET_UNLOCK_OFFSET 16 |
| #define POWER_RESET_UNLOCK_KEY (0x3e77 << 16) |
| #define POWER_RESET_FASTFALL_PSWITCH_OFF (1 << 2) |
| #define POWER_RESET_PWD_OFF (1 << 1) |
| #define POWER_RESET_PWD (1 << 0) |
| |
| #define POWER_DEBUG_VBUSVALIDPIOLOCK (1 << 3) |
| #define POWER_DEBUG_AVALIDPIOLOCK (1 << 2) |
| #define POWER_DEBUG_BVALIDPIOLOCK (1 << 1) |
| #define POWER_DEBUG_SESSENDPIOLOCK (1 << 0) |
| |
| #define POWER_THERMAL_TEST (1 << 8) |
| #define POWER_THERMAL_PWD (1 << 7) |
| #define POWER_THERMAL_LOW_POWER (1 << 6) |
| #define POWER_THERMAL_OFFSET_ADJ_MASK (0x3 << 4) |
| #define POWER_THERMAL_OFFSET_ADJ_OFFSET 4 |
| #define POWER_THERMAL_OFFSET_ADJ_ENABLE (1 << 3) |
| #define POWER_THERMAL_TEMP_THRESHOLD_MASK 0x7 |
| #define POWER_THERMAL_TEMP_THRESHOLD_OFFSET 0 |
| |
| #define POWER_USB1CTRL_AVALID1 (1 << 3) |
| #define POWER_USB1CTRL_BVALID1 (1 << 2) |
| #define POWER_USB1CTRL_VBUSVALID1 (1 << 1) |
| #define POWER_USB1CTRL_SESSEND1 (1 << 0) |
| |
| #define POWER_SPECIAL_TEST_MASK 0xffffffff |
| #define POWER_SPECIAL_TEST_OFFSET 0 |
| |
| #define POWER_VERSION_MAJOR_MASK (0xff << 24) |
| #define POWER_VERSION_MAJOR_OFFSET 24 |
| #define POWER_VERSION_MINOR_MASK (0xff << 16) |
| #define POWER_VERSION_MINOR_OFFSET 16 |
| #define POWER_VERSION_STEP_MASK 0xffff |
| #define POWER_VERSION_STEP_OFFSET 0 |
| |
| #define POWER_ANACLKCTRL_CLKGATE_0 (1 << 31) |
| #define POWER_ANACLKCTRL_OUTDIV_MASK (0x7 << 28) |
| #define POWER_ANACLKCTRL_OUTDIV_OFFSET 28 |
| #define POWER_ANACLKCTRL_INVERT_OUTCLK (1 << 27) |
| #define POWER_ANACLKCTRL_CLKGATE_I (1 << 26) |
| #define POWER_ANACLKCTRL_DITHER_OFF (1 << 10) |
| #define POWER_ANACLKCTRL_SLOW_DITHER (1 << 9) |
| #define POWER_ANACLKCTRL_INVERT_INCLK (1 << 8) |
| #define POWER_ANACLKCTRL_INCLK_SHIFT_MASK (0x3 << 4) |
| #define POWER_ANACLKCTRL_INCLK_SHIFT_OFFSET 4 |
| #define POWER_ANACLKCTRL_INDIV_MASK 0x7 |
| #define POWER_ANACLKCTRL_INDIV_OFFSET 0 |
| |
| #define POWER_REFCTRL_FASTSETTLING (1 << 26) |
| #define POWER_REFCTRL_RAISE_REF (1 << 25) |
| #define POWER_REFCTRL_XTAL_BGR_BIAS (1 << 24) |
| #define POWER_REFCTRL_VBG_ADJ_MASK (0x7 << 20) |
| #define POWER_REFCTRL_VBG_ADJ_OFFSET 20 |
| #define POWER_REFCTRL_LOW_PWR (1 << 19) |
| #define POWER_REFCTRL_BIAS_CTRL_MASK (0x3 << 16) |
| #define POWER_REFCTRL_BIAS_CTRL_OFFSET 16 |
| #define POWER_REFCTRL_VDDXTAL_TO_VDDD (1 << 14) |
| #define POWER_REFCTRL_ADJ_ANA (1 << 13) |
| #define POWER_REFCTRL_ADJ_VAG (1 << 12) |
| #define POWER_REFCTRL_ANA_REFVAL_MASK (0xf << 8) |
| #define POWER_REFCTRL_ANA_REFVAL_OFFSET 8 |
| #define POWER_REFCTRL_VAG_VAL_MASK (0xf << 4) |
| #define POWER_REFCTRL_VAG_VAL_OFFSET 4 |
| |
| #endif /* __MX28_REGS_POWER_H__ */ |
